Chuango IP116 User manual

Overview
• Front View
LED Indicators
Camera
Microphone
Red indicator Blinking Enter WiFi pairing state
Blue indicator Blinking Searching network
On Network connected
• Side View •Back View
DC5V
Micro SD
Reset Button
microSD Card
Slot
Heat Vent
Power Jack
microSD Card (Not included)
Support 32GB microSD card maximum; please do not insert the
card after the camera is powered on.
This camera automatically records and saves video once every 20
minutes; the video recorded at the earliest will be replaced with the
latest ones if the microSD card is full.
Note: Please format your microSD card before inserting into this slot if any
ÀOHKDGEHHQZULWWHQLQ
Check What You Have
WiFi Camera×1 AC Adapter×1
Quick Guide×1 Reset Pin×1
Download the App
Download the App by searching “IP116 camera” from Apple Store
or Google Play.
IP116 Camera
WiFi Pairing
1. Preparation
• Hold the reset button by using
the supplied reset pin until the
camera beeps once, and then
the red indicator starts to blink
• Find and choose the
WiFi named “HD
WiFi Cam” from your
phone’s WiFi list
2. Pairing Camera with WiFi through App
• Launch the App,
tap [+] to add a
new camera
• Name your
camera, enter
the password
(default: 888888)
and input your
home WiFi name
& password
• When the blue
indicator is on,
it means the
camera has
connected with
WiFi
The paired camera will be displayed in the video list.
Note: For safety, it is recommended to change the password of your camera
on the setting menu after pairing.
Printed in China
PA: IP116-UM-EN-V1.0
2015 Chuango. All Rights Reserved.

Quick Guide
IP113 HD WiFi Camera
Quick Guide
IP116 HD WiFi Camera
Password
All the successfully paired phones have the same authority as
administrator who can view and set the camera (including changing
the password), so it is recommended to pair the phones of users
with caution. For non-administrator users, you can share the camera
by sending the QR code for them to scan.
Sync the Date and Time
Check if the camera’s date and time are set correctly. Sync them
with your phone’s time if necessary.
Enjoy the App
Snapshot
Record
Hold To Talk
Speaker
Installation
Important: This camera should be placed where the WiFi signal is strong
for optimal performance before installation.
ŗ
Ř
ř
6SHFLÀFDWLRQ
Image sensor
Min. illumination
Shutter time
Lens
Angle of view
Video compression
Bit rate
Max. image resolution
Frame rate
Storage
Wireless standards
Frequency range
Channel bandwidth
Operating conditions
Power supply
Power consumption
Dimensions (L x W x H)
Sony 1/3” CMOS Sensor
Color: 0.01Lux@ (F1.2, AGC ON)
Black and white : 0.001Lux@ (F1.2,
AGC ON)
1/50s to 1/100,000s
2.4 mm F2.0
110°
H.264
Self - adaption
1280 x 720
30fps (1280 × 720)
Built-in microSD card slot, up to 32GB
IEEE802.11b/g/n
2.4 GHz ~ 2.4835 GHz
20/40MHz Support
Temperature: -30 °C - 60 °C
(-22 °F - 140 °F)
Humidity: <95% (non-condensing)
DC 5V 2A
5W MAX
91 x 78 x 115 mm
Settings
Setting
Button
Camera
Sharing QR
Code
Device ID
Share or Stop Sharing Camera with Your Friends
Show or send the QR code of your camera to
your friends, they can simply add the camera
by choosing the [QR code] on their App and
then scan.
If you want to stop sharing the camera, please
change the password of camera.