Cincoze DX-1100 Series User manual

Rugged Workstation
8th Generation Intel® Xeon® and Core™ Processors,
Extreme Performance, Compact and Modular Rugged Workstation
DX-1100 Series

DX-1100 Series Rugged Workstation | User’s Manual
2
Contents
Preface
Revision …………………………………………….……..……………………..……….. 04
Copyright Notice …………………………………………………………………..……… 04
Acknowledgement …………………………………………….…………….................... 04
Disclaimer ………………………………………………………….……………….…….. 04
Declaration of Conformity ……………………………………….……………….……… 04
Product Warranty Statement ………………………………………. …………….…….. 05
Technical Support and Assistance …………………………………. …………….……. 06
Conventions Used in this Manual ………………………………………….…….…….. 06
Safety Precautions …..…………………………………….………………….……..….. 07
Package Contents ……………………………………………….…………….………… 08
Ordering Information …..……………………………….................... …….................... 08
Optional Modules & Accessories …..……………………………….. …….................... 09
Chapter 1 Product Introductions
1.1 Overview ………………………………………….………………….………. 11
1.2 Highlights ………………………………………….…………………………. 11
1.3 Product Pictures……..…………………………….…………………………. 12
1.4 Key Features …………………..………………….………………….………. 12
1.5 Hardware Specification ………………………….……..…………………… 13
1.6 System I/O ……………………………………….………………………….. 14
1.6.1 Front ………………………………………………………………….... 14
1.6.2 Rear ………………………………………………………………..…… 15
1.6.3 Optional Module Configuration…………………………………..…… 16
1.7 Mechanical Dimension ………………………….………..……………..…. 16
Chapter 2 System Pin Definitions and Settings
2.1 Location of Switches and Connectors ………………………………………18
2.1.1 Top View………………………………………………………………… 18
2.1.2 Bottom View………………………………………………...……......... 19
2.2 Switches and Connectors Definition………….…..……..……………..…....20
2.3 Definition of Switches …...……………...............................……...….….... 21
2.4 Definition of Connectors …..….…..………...…….....................……......... 23
Chapter 3 System Setup
3.1 Disassembling the System for Installation …………..…..……. …………..29
3.2 Installing Components on Top Side…………………....………………….... 32
3.2.1 Installing the CPU ………….………………………………...……...... 32
3.2.2 Installing SO-DIMM Memory …………....…………….....…………... 36
3.2.3 Installing a Mini-PCIe/mSATA Card …………………………………. 37
3.2.4 Installing Antennas………………………………………..…………… 38
3.3 Assembling the System….…………………………..….…………………... 40
3.3.1 Installing Thermal Pad ………………………………………………. 40
3.3.2 Installing Top Cover …………………………………………………….40
3.3.3 Installing Bottom Cover ……………………………………………….. 41
3.4 Installing Components at Front Side……………………....……. ……….... 42
3.4.1 Removing the Front Cover Plate……………...……………………… 42
3.4.2 Installing a SATA Hard Drive at Front Side …....……………..…….. 42
3.4.3 Installing a SIM Card …....…………………………………………….. 45
3.4.4 Installing the CMOS Battery…....………………..…………………….46
3.4.5 Fasten the Cover…....…………………………….. ………………….. 48
3.4.6 Install an External Fan .....……………………………………….……. 48
3.5 Wall Mount Brackets………………………….……………..………………. 51
3.6 DIN-Rail Mount Brackets…………….…….……………………………….. 52
3.7 VESA Mount ……………………………………………..….………………... 53
3.8 Side Mount Brackets………..…………………..……..……………………. 55

DX-1100 Series Rugged Workstation | User’s Manual
3
Chapter 4 BIOS Setup
4.1 BIOS Introduction ………..…………………..……..………………………… 58
4.2 Main Setup………..…………………..……..……………………………….… 59
4.2.1 System Date ………..…………………..……..………………………. 59
4.2.2 System Time ………..…………………..……..………………………. 59
4.3 Advanced Setup ………..…………………..……..…………………….…….. 60
4.3.1 CPU Configuration..…………………………….………….…………… 60
4.3.2 SATAConfiguration..…………………………….….…………………… 61
4.3.3 PCH-FW Configuration..…………………………….………………….. 63
4.3.4 Trusted Computing Settings…………….…………………………….. 64
4.3.5 ACPI Settings..…………………………….…………………………….. 65
4.3.6 F81866 Super IO Configuration..…………………………….………… 66
4.3.7 Hardware Monitor..…………………………….………………………… 67
4.3.8 S5 RTC Wake Settings..…………………………….………………….. 69
4.3.9 Serial Port Console Redirection..…………………………….………… 70
4.3.10 USB Configuration..…………………………….……………………… 71
4.3.11 Network Stack Configuration..………………………….……………. 72
4.3.12 CSM Configuration..…………………………….………………………72
4.4 Chipset Setup ………………………..…………………………….………….. 74
4.4.1 System Agent (SA) Configuration ……………….……….....………. 74
4.4.2 PCH-IO Configuration ………………………….…………..……….... 75
4.5 Security Setup …...……….………………….…..….…...………………….... 78
4.5.1 Administrator Password …….……………………….……..………… 78
4.5.2 User Password …….……………………………..…….…...………… 78
4.6 Boot Setup …..…….………………………………………………….……….. 79
4.6.1 Setup Prompt Timeout……………………………..…………………. 79
4.6.2 Bootup NumLock State …………………………………………….… 79
4.6.3 Quiet Boot ……………………………………….…….………………. 79
4.6.4 Fast Boot ……………..……………………………….………………. 79
4.6.5 New Boot Option Policy …….………………………….……………..79
4.6.6 Hard Drive BBS Priority.………………………………………………. 79
4.7 Save & Exit …...……….….………………….…..….…..…………………..... 80
4.7.1 Save Changes and Exit ………………..…………………….. ..….…. 80
4.7.2 Discard Changes and Exit …………………………..….…………….. 80
4.7.3 Save Changes and Reset ……………………………….……….…... 80
4.7.4 Discard Changes and Reset ….………………..….…………………. 80
4.7.5 Save Changes …………………………………………………………. 80
4.7.6 Discard Changes ………………………………………………………. 80
4.7.7 Restore Defaults …………………….………………………………… 80
4.7.8 Save as User Defaults ………..………………….…………………… 80
4.7.9 Restore User Defaults ..…………….………………………….……… 80
Chapter 5 Product Application
5.1 Digital I/O (DIO) Application………………….…………..…………………… 82
5.1.1 Digital I/O Programming Guide …………………………….………… 82
5.2 (DIO) Hardware Specification……………………………………..……. …… 89
5.2.1 DIO Connector Definition..….……………………….…....…………… 90
Chapter 6 Optional Module Pin Definitions and Settings
6.1 CMI-COM Module Connector Definition and Settings……….….…………. 92
6.2 CMI-M12 Module Connector Definition and Settings……….….…………. 93
6.3 CFM-IGN Power Ignition Module Switches Definition and Settings.….…. 94
6.4 Installing a CMI-COM Module………………..………….….….…….………. 95
6.5 Installing a CMI-DIO Module………………………………….….…………. 97
6.6 Installing a High Speed CMI Module……….….…………………………….. 99
6.7 Installing a CFM-PoE Module……….….…………………………………….. 103
6.8 Installing a CFM-IGN Power Ignition Module……….………………………..107

DX-1100 Series Rugged Workstation | User’s Manual
4
Revision
Preface
Revision
Description
Date
1.00
New
Release
2019/02/11
Copyright Notice
© 2017 by Cincoze Co., Ltd. All rights are reserved. No parts of this manual may be copied, modified,
or reproduced in any form or by any means for commercial use without the prior written permission of
Cincoze Co., Ltd. All information and specification provided in this manual are for reference only and
remain subject to change without prior notice.
Acknowledgement
Cincoze is a registered trademark of Cincoze Co., Ltd. All registered trademarks and product names
mentioned herein are used for identification purposes only and may be trademarks and/or registered
trademarks of their respective owners.
Disclaimer
This manual is intended to be used as a practical and informative guide only and is subject to change
without notice. It does not represent a commitment on the part of Cincoze. This product might include
unintentional technical or typographical errors. Changes are periodically made to the information
herein to correct such errors, and these changes are incorporated into new editions of the publication.
Declaration of Conformity
FCC
This equipment has been tested and found to comply with the limits for a Class Adigital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
CE
The product(s) described in this manual complies with all application European Union
(CE) directives if it has a CE marking. For computer systems to remain CE compliant,
only CE-compliant parts may be used. Maintaining CE compliance also requires proper
cable and cabling techniques.

DX-1100 Series Rugged Workstation | User’s Manual
5
Product Warranty Statement
Warranty
Cincoze products are warranted by Cincoze Co., Ltd. to be free from defect in materials and
workmanship for 2 years from the date of purchase by the original purchaser.
During the warranty period, we shall, at our option, either repair or replace any product that proves to
be defective under normal operation.
Defects, malfunctions, or failures of the warranted product caused by damage resulting from natural
disasters (such as by lightening, flood, earthquake, etc.), environmental and atmospheric disturbances,
other external forces such as power line disturbances, plugging the board in under power, or incorrect
cabling, and damage caused by misuse, abuse, and unauthorized alteration or repair, and the product
in question is either software, or an expendable item (such as a fuse, battery, etc.), are not warranted.
RMA
Before sending your product in, you will need to fill in Cincoze RMA Request Form and obtain a RMA
number from us. Our staff is available at any time to provide you with the most friendly and immediate
service.
◼RMA Instruction
⚫Customers must fill in Cincoze Return MerchandiseAuthorization (RMA) Request Form and
obtain a RMAnumber prior to returning a defective product to Cincoze for service.
⚫Customers must collect all the information about the problems encountered and note anything
abnormal and describe the problems on the “Cincoze Service Form” for the RMA number apply
process.
⚫Charges may be incurred for certain repairs. Cincoze will charge for repairs to products whose
warranty period has expired. Cincoze will also charge for repairs to products if the damage
resulted from acts of God, environmental or atmospheric disturbances, or other external forces
through misuse, abuse, or unauthorized alteration or repair. If charges will be incurred for a
repair, Cincoze lists all charges, and will wait for customer’s approval before performing the
repair.
⚫Customers agree to insure the product or assume the risk of loss or damage during transit, to
prepay shipping charges, and to use the original shipping container or equivalent.
⚫Customers can be send back the faulty products with or without accessories (manuals, cable,
etc.) and any components from the system. If the components were suspected as part of the
problems, please note clearly which components are included. Otherwise, Cincoze is not
responsible for the devices/parts.
⚫Repaired items will be shipped along with a "Repair Report" detailing the findings and actions
taken.
Limitation of Liability
Cincoze’ liability arising out of the manufacture, sale, or supplying of the product and its use, whether
based on warranty, contract, negligence, product liability, or otherwise, shall not exceed the original
selling price of the product. The remedies provided herein are the customer’s sole and exclusive
remedies. In no event shall Cincoze be liable for direct, indirect, special or consequential damages
whether based on contract of any other legal theory.

DX-1100 Series Rugged Workstation | User’s Manual
6
Technical Support and Assistance
1. Visit the Cincoze website at www.cincoze.com where you can find the latest information about the
product.
2. Contact your distributor or our technical support team or sales representative for technical support
if you need additional assistance. Please have following information ready before you call:
⚫Product name and serial number
⚫Description of your peripheral attachments
⚫Description of your software (operating system, version, application software, etc.)
⚫A complete description of the problem
⚫The exact wording of any error messages
Conventions Used in this Manual
This indication alerts operators to an operation that, if not strictly
observed, may result in severe injury.
WARNING
This indication alerts operators to an operation that, if not strictly
observed, may result in safety hazards to personnel or damage to
equipment.
CAUTION
This indication provides additional information to complete a task easily.
NOTE

DX-1100 Series Rugged Workstation | User’s Manual
7
Safety Precautions
Before installing and using this device, please note the following precautions:
1. Read these safety instructions carefully.
2. Keep this User’s Manual for future reference.
3. Disconnected this equipment from anyAC outlet before cleaning.
4. For plug-in equipment, the power outlet socket must be located near the equipment and must be
easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting it fall may cause
damage.
7. Make sure the voltage of the power source is correct before connecting the equipment to the
power outlet.
8. Use a power cord that has been approved for using with the product and that it matches the
voltage and current marked on the product’s electrical range label. The voltage and current rating
of the cord must be greater than the voltage and current rating marked on the product.
9. Position the power cord so that people cannot step on it. Do not place anything over the power
cord.
10.All cautions and warnings on the equipment should be noted.
11.If the equipment is not used for a long time, disconnect it from the power source to avoid damage
by transient overvoltage.
12.Never pour any liquid into an opening. This may cause fire or electrical shock.
13.Never open the equipment. For safety reasons, the equipment should be opened only by qualified
service personnel.
If one of the following situations arises, get the equipment checked by service personnel:
⚫The power cord or plug is damaged.
⚫Liquid has penetrated into the equipment.
⚫The equipment has been exposed to moisture.
⚫The equipment does not work well, or you cannot get it work according to the user's manual.
⚫The equipment has been dropped and damaged.
⚫The equipment has obvious signs of breakage.
14. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type recommended by the manufacturer.

DX-1100 Series Rugged Workstation | User’s Manual
8
Package Contents
Before installation, please ensure all the items listed in the following table are included in the package.
Item
Description
Q’ty
1
Rugged
Workstation 1
2
CPU Heatsink Pack
1
3
Utility DVD Driver
1
4
Screw Pack
1
5
Wall Mounting Kit
1
6
Power Terminal Block Connector
1
7
Remote Power On/Off Terminal Block Connector
1
8
Fan Terminal Block Connector
1
9
DVI
-I to VGAAdaptor 1
Note: Notify your sales representative if any of the above items are missing or damaged.
Ordering Information
Model No.
Product Description
DX
-1100-R10
8th Generation Intel® Xeon® and Core™ Processors,
Extreme Performance, Compact and Modular Rugged Workstation

DX-1100 Series Rugged Workstation | User’s Manual
9
Model No. Description
CFM-PoE01 CFM Module with PoE Control Function, Individual Port 25.5W
CFM-IGN01 CFM Module with Power Ignition Sensing Control Function, 12V/24V Selectable
CMI-LAN01/UB0912 CMI Module with 4x Intel I210-AT GbE
LAN, RJ45 Port / 1x Universal Bracket with 4x RJ45 Cutout
for DX Series
CMI-M12LAN01/UB0910 CMI Module with M12 Connector, 4x Intel GbE
LAN / 1x Universal Bracket with 4x M12 Cutout for
DX Series
CMI-DIO01/UB0918 CMI Module with 16DIO (8in 8out) / 1xUniversal Bracket with DIO Cutout for DX Series
CMI-COM01/UB0903
CMI Module with 2x RS232/422/485 (Support 5V/12V) / 1x Universal Bracket with 2x DB9 Cutout
for DX Series
MEC-COM-M212-
TDB9/UB0903
Mini-PCIe Module with 2x RS-232 Serial Ports, 1x Thin DB9 Cable / 1x Universal Bracket with 2x
DB9 Cutout for DX Series
MEC-COM-M334-
TDB9/2xUB0903
Mini-PCIe Module with 2x RS-232 Serial Ports, 2x Thin DB9 Cable / 2x Universal Bracket with 2x
DB9 Cutout for DX Series
MEC-LAN-M002-
30/UB0911
Mini-
PCIe Module with 2x LAN Ports, 2x 30cm cable / 1x Universal Bracket with 2x RJ45 Cutout for
DX Series
GST120A24-CIN Adapter AC/DC 24V 5A 120W, with 3pin Terminal Block Plug 5.0mm Pitch, with TUBES, level VI
GST220A24-CIN Adapter AC/DC 24V 9.2A 220W with 3pin Terminal Block Plug 5.0mm Pitch, with TUBES, level VI
FAN-EX101 External Fan with 4pin Terminal Block Plug and Mounting Bracket, Support smart fan
SIDE-DX DX Series side mount kit
DIN01 DIN-RAIL Mount Kit, KMRH-K175
Optional Modules & Accessories

Product Introductions
Chapter 1

DX-1100 Series Rugged Workstation | User’s Manual
11
1.1 Overview
1.2 Highlights
The Cincoze DX-1100 is a rugged workstation specifically designed to satisfy demands for the
high-performance computing platform. Based on LGA 1151 socket and Intel® C246 chipset,
the system supports 8th generation Intel Xeon® and Core™ processors (formerly codenamed
Coffee Lake S) with up to 6 cores and 32GB memory capacity.
Despite its remarkably compact size, the DX-1100 still delivers the maximum flexibility of
modular I/O expansions and provides dual hot-swap 2.5" HDD/SSD tray with RAID function.
Thanks to Cincoze’exclusive CFM (Control Function Module) technologies, the DX-1100 can
be configured instantly with Power over Ethernet and power ignition sensing functions to be
applied in many industrial applications, such as machine vision, in-vehicle transportation, and
mobile surveillance.
Featuring rugged construction, fanless/cable-less/jumper-less design, wide operating
temperature (-40 to +70°C), wide range DC power input (9~48 VDC), high tolerance to
vibration and shock (5/50 Grms), the DX-1100 is maintenance-free and ideal to be deployed in
harsh environments.
Workstation Performance & Compact Modular Computing Application-driven Functions
Supporting 8th Gen Intel® Xeon® E-series
processors (up to hexa-core, 4.7 GHz), the
DX-1100 delivers workstation performance
available in a compact size for multi-task
applications and space-limited environments.
Based on Cincoze’ trusted, innovative, and
reliable modular design, the DX-1100 brings
the maximum flexibility and allows users to
configure I/O interfaces according to specific
application requirements.
DX-1100 allows users extend functions and
additional I/O interfaces according to their
requirements. The available option modules
include power ignition sensing, M12 PoE,
GbE LAN, COM ports and Digital I/Os.

DX-1100 Series Rugged Workstation | User’s Manual
Rear
12
1.3 Product Pictures
Front
1.4 Key Features
• Supports 8th Gen Intel® Xeon® and Core™ Hexa-core Processor
•Triple Independent Display with 4K/2K UHD Resolution (HDMI / DP / DVI-I)
•2x 2.5" Hot Swap SATA HDD/SSD Tray, 3x mSATA Socket
•2x USB 3.1 (10Gb/s) for Ultimate Data-transfer Speed
•1x M.2 E Key Socket (CNVi), 3x Full-size Mini-PCIe Socket, 1x SIM Card Socket
•Supports CMI Interface for I/O Expandability
•Supports PoE+ and Power Ignition Sensing (with optional CFM modules)
•Wide Operating Temperature -40°C to 70°C
•E-Mark (E13), LVD EN60950-1, EN50155 / EN50121-3-2

DX-1100 Series Rugged Workstation | User’s Manual
13
Processor
• Xeon:
Intel® Xeon®E-2176G Hexa Core up to 4.7 GHz - 12M Cache, TDP 80W
Intel® Xeon®E-2124G Quad Core up to 4.5 GHz - 8M Cache, TDP 71W
• Core i:
Intel® Core™ i7-8700 Hexa Core up to 4.6 GHz - 12M Cache, TDP 65W
Intel® Core™ i5-8500 Hexa Core, up to 4.1 GHz - 9M Cache, TDP 65W
Intel® Core™ i3-8100 Quad Core 3.6 GHz - 6M Cache, TDP 65W
Intel® Core™ i7-8700T Hexa Core up to 4.0 GHz - 12M Cache, TDP 35W
Intel® Core™ i5-8500T Hexa Core up to 3.5 GHz - 9M Cache, TDP 35W
Intel® Core™ i3-8100T Quad Core 3.1 GHz - 6M Cache, TDP 35W
• Pentium:
Intel® Pentium®G5400 Dual Core 3.7 GHz - 4M Cache, TDP 58W
Intel® Pentium®G5400T Dual Core 3.1 GHz - 4M Cache, TDP 35W
• Celeron:
Intel® Celeron®G4900 Dual Core 3.1 GHz - 2M Cache, TDP 54W
Intel® Celeron®G4900T Dual Core 2.9 GHz - 2M Cache, TDP 35W
Chipset
Intel®C246
BIOS
AMI 32MB BIOS
Memory
• 2x DDR4-2666/2400 MHz SO-DIMM Sockets
• Support up to 32 GB (Un-buffered and Non-ECC type)
* i3/Pentium/Celeron: DDR4 2400 MHz
Graphics
• Integrated Intel® UHD Graphics
(Xeon: UHD P630; i7/i5/i3: UHD 630; Pentium/Celeron: UHD 610)
• Supports Triple Independent Display (DVI-I/DisplayPort/HDMI)
Audio
• Realtek® ALC888, High Definition Audio
I/O Interface
• 1x DVI-I Connector
(VGA: 1920 x1080 @ 60 Hz; DVI-D: 1920 x1200 @ 60 Hz)
• 1x DisplayPort Connector (3840 x 2160 @30Hz)
• 1x HDMI Connector (3840 x 2160 @30Hz)
• 2x GbE LAN (Support WoL, Teaming, Jumbo Frame, IEEE 1588v2
and PXE), RJ45
- GbE1: Intel® I219-LM
- GbE2: Intel® I210-IT
• 4x RS-232/422/485 with Auto Flow Control (Support 5V/12V), DB9
• 2x USB 3.1 (Type-A)
• 6x USB 3.0 (Type-A)
• 1x Line-out & 1x Mic-in, Phone Jack 3.5mm
• 1x ATX Power On/Off Button
• 1x Reset Button
• 1x AT/ATX Mode Switch
• 1x Clear CMOS Switch
• 1x Remote Power On/Off Connector, 2-pin Terminal Block
• 1x External FAN Connector, 4-pin Terminal Block
(Supports Smart Fan by BIOS)
Storage
• 2x 2.5" Front Accessable SATA HDD/SSD Bay (SATA 3.0)
• 3x mSATA Socket (SATA 3.0, shared by Mini-PCIe socket)
• Supports S/W RAID 0, 1, 5 & 10
1.5 Hardware Specification
Expansion
• 1x Control Function Module (CFM) Interface
• 2x Combined Multiple I/O (CMI) High Speed Interface
• 1x Combined Multiple I/O (CMI) Low Speed Interface
• 1x M.2 2230 Socket (Key E), supports WiFi/Bluetooth module or
BIOS Selectable Intel® CNVi (Integrated WiFi/Bluetooth)
• 3x Full-size Mini-PCIe Socket
• 1x SIM Socket
• 3x Antenna Hole
Other Function
• Supports Instant Reboot Technology (0.2 sec)
• SuperCap Integrated for CMOS Battery Maintenance-free Operation
• Watchdog Timer: Software Programmable Supports 256 Levels
System Reset
Power Requirement
• Supports AT/ATX Power Type
• Power Input Voltage 9~48VDC
• 1x 3-pin Terminal Block
• Power Adapter AC/DC 24V/5A 120W or 24V/9.2A 220W (Optional)
Physical
• Dimension (WxDxH): 242 x 173 x 77 mm
• Weight: 3.6 kg
• Extruded Aluminum with Heavy Duty Metal
• Wall mount / VESA mount / DIN Rail Mount / Side Mount
• Unibody Chassis
• Fanless Design
• Jumper-less Design
• Cable less Design
Protection
• Reverse Power Input Protection
• Over Voltage Protection: 58V
• Over Current Protection: 15A
• ESD Protection: +/-15kV (air), +/-8kV (contact)
• Surge Protection: 3.84 kV (impedance 12 ohm 1.2/50us waveform)
Operating System
• Windows® 10
• Linux: Supports by Project
Environment
• Operating Temperature:
35W TDP Processor: -40°C to 70°C
54~65W TDP Processor: -40°C to 45°C
71~80W TDP Processor: -40°C to 40°C
* PassMark BurnInTest: 100% CPU, 2D/3D Graphics (without thermal throttling)
* With extended temperature peripherals; Ambient with air flow
* According to IEC60068-2-1, IEC60068-2-2, IEC60068-2-14
• Storage Temperature: -40°C to 85°C
• Relative Humidity: 95% RH @ 40°C (Non-condensing)
• Shock: Operating, 50 Grms, Half-sine 11 ms Duration
* w/ SSD, according to IEC60068-2-27
• Vibration: Operating, 5 Grms, 5-500 Hz, 3 Axes
* w/ SSD, according to IEC60068-2-64
• MTBF: 407,391 Hours
Database: Telcordia SR-332 Issue 3, Method 1, Case 3
Certification
• EMC: CE, FCC Class A
• Safety: LVD (EN60950-1), Pending
• Railway: EN50155, EN50121-3-2, Pending
• In-Vehicle: E-Mark (E13, No.TBD), Pending

DX-1100 Series Rugged Workstation | User’s Manual
1.6.1 Front Panel
14
1.6 System I/O
ATX Power On/Off Button
Press to power-on or power-off the system
HDMI Port
Used to connect the system with HDMI
monitor
Power LED
Indicates the power status of the system
HDD LED
Indicates the status of the hard drive
IGN LED
Indicates the status of the IGN function
Temperature LED
Indicates the temperature of the system
Universal I/O Bracket
Used to customized I/O output with optional
modules
USB 3.1 Port
Used to connect USB 3.1/3.0/2.0/1.1 device
USB 3.0 Port
Used to connect USB 3.0/2.0/1.1 device
IGN Setting Switch
Used to set up IGN function
SIM Card Slot
Used to inserts a SIM card
Clear CMOS Switch
Used to clear CMOS to reset BIOS
Reset Button
Used to reset the system
AT/ATX Mode Select Switch
Used to select AT or ATX power mode
Removable 2.5” SATA HDD/SSD Bay
Used to inserts a 2.5” HDD/SSD

DX-1100 Series Rugged Workstation | User’s Manual
15
DC IN Terminal Block
Used to plug a DC power input with terminal
block
Antenna Hole
Used to install an antenna jack
LAN Port
Used to connect the system to a local area
network
USB 3.0 Port
Used to connect USB 3.0/2.0/1.1 device
DVI-I Port
Used to connect a DVI monitor or connect
optional split cable for dual display mode
DisplayPort Port
Used to connect the system with DisplayPort
monitor
COM Port
COM #1 ~ COM #4 support RS232/422/485
serial device
Line-out
Used to connect a speaker
Mic-in
Used to connect a microphone
Remote Power On/Off Terminal Block
Used to plug a remote power on/off terminal
block
Universal I/O Bracket
Used to customized I/O output with optional
modules
1.6.2 Rear Panel

DX-1100 Series Rugged Workstation | User’s Manual
16
1.7 Mechanical Dimension
Unit: mm
1.6.3 Optional Module Configuration
Model No. Description 1 2 3 4
CFM
-PoE01
CFM Module with PoE Control Function, Individual Port 25.5W
Ｖ Ｖ － －
CMI
-LAN01/UB0912
CMI Module with 4x Intel I210
-AT GbE LAN, RJ45 Port / 1x
Universal Bracket with 4x RJ45 Cutout for DX Series
Ｖ Ｖ － －
CMI
-M12LAN01/UB0910
CMI Module with M12 Connector, 4x Intel
GbE LAN / 1x
Universal Bracket with 4x M12 Cutout for DX Series
Ｖ Ｖ － －
CMI
-DIO01/UB0918
CMI Module with 16DIO (8in 8out) / 1xUniversal Bracket with
DIO Cutout for DX Series
－－－Ｖ
CMI
-COM01/UB0903
CMI Module with 2x RS232/422/485 (Support 5V/12V) / 1x
Universal Bracket with 2x DB9 Cutout for DX Series
－－－Ｖ
MEC
-COM-M212-TDB9/
UB0903
Mini
-PCIe Module with 2x RS-
232 Serial Ports, 1x Thin DB9 Cable
/ 1x Universal Bracket with 2x DB9 Cutout for DX Series
Ｖ Ｖ Ｖ Ｖ
MEC
-COM-M334-TDB9/
2xUB0903
Mini
-PCIe Module with 2x RS-
232 Serial Ports, 2x Thin DB9 Cable
/ 2x Universal Bracket with 2x DB9 Cutout for DX Series
Ｖ Ｖ
MEC
-LAN-M002-
30/UB0911
Mini
-PCIe Module with 2x LAN Ports, 2x 30cm cable / 1x
Universal Bracket with 2x RJ45 Cutout for DX Series
－ － Ｖ－

System Pin Definitions and
Settings
Chapter 2

DX-1100 Series Rugged Workstation | User’s Manual
18
2.1.1 Top View
2.1 Location of the Connectors and Switches

DX-1100 Series Rugged Workstation | User’s Manual
19
2.1.2 Bottom View

DX-1100 Series Rugged Workstation | User’s Manual
20
2.2 Switches and Connectors Definition
List of Switches
Location Definition
AT_ATX1
AT / ATX Power Mode Switch
PWR_SW1
ATX Power on/off Button
SW1
COM1~4 with Power Select Switch
SW2
IGN Module Timing Setting Switch
SW3
Super CAP Switch
24V_12V_1
IGN Module Voltage Mode Setting Switch
Reset1
Reset Button
CLR_CMOS1
Clear BIOS Switch
List of Connectors
Location Definition
SODIMM1,SODIMM2
260
-pin SO-DIMM DDR4 Sockets
SATA1, SATA2
22
-Pin SATA3.0 Sockets
CN
3
Mini PCI
-Express Socket (mPCIE/ mSATA/ 4G Module)
CN
4, CN6
Mini
PCI-Express Socket (mPCIE/ mSATA)
CN
5
M.2 Key E Socket (
M.2 PCIE / Intel CNVi)
DC_IN1
3
-pin DC 9~48V Power Input with Power Ignition Connector
PWR_SW2
Remote Power on/off Connector
CN1
LAN1 and USB3.0
Connectors
CN
2
LAN2 and USB3.0
Connectors
COM1_1, COM1_2
COM1~COM4 RS232 / RS422 / RS485 Connectors
DVI_I
1
DVI
-I Connector
DP1
DisplayPort Connector
JHDMI1
HDMI
Connector
USB3.1
USB 3.1 Ports
USB3.0
USB 3.0 Ports
FAN1
External PWM Fan Connector
AUDIO1
MIC_IN / LINE_OUTAudio Jack
BTB_FH1
CMI Module to Board
Connector
BTB_FH2, BTB_FH4
POE LAN Module to Board Connectors
IGN_PH1
IGN Module to Board Connector
Power 1~3
+5V / +12V Power Output Connectors
FS_1
Input Power Fuse 15A Connector
LED_B1
System
LED Connector