Cincoze GP-3000 Series User manual

Embedded GPU Computer
9/8th Gen Intel®Xeon®/Core™ Modular GPU Computer,
Supports Dual Full-length GPU Expansion Up to 500W
Embedded GPU Computer
Version: V1.00
GP-3000 Series
User Manual

GP-3000 Series | User Manual 2
Contents
Preface.................................................................................................................................6
Revision....................................................................................................................................6
Copyright Notice.......................................................................................................................6
Acknowledgement ....................................................................................................................6
Disclaimer.................................................................................................................................6
Declaration of Conformity .........................................................................................................6
Product Warranty Statement.....................................................................................................7
Technical Support and Assistance............................................................................................9
Conventions Used in this Manual..............................................................................................9
Safety Precautions..................................................................................................................10
Ordering information...............................................................................................................11
Chapter 1 Product Introductions.....................................................................................13
1.1 Overview..........................................................................................................................14
1.2 Highlights.........................................................................................................................15
1.3 Product Pictures...............................................................................................................16
1.4 Key Features....................................................................................................................19
1.5 Hardware Specification ....................................................................................................20
1.6 System I/O.......................................................................................................................23
1.7 Mechanical Dimension.....................................................................................................26
Chapter 2 Switches & Connectors..................................................................................28
2.1 Location of Switches and Connectors ..............................................................................29
2.1.1 Top View.................................................................................................................29
2.1.2 Bottom View............................................................................................................29
2.2 Switches and Connectors Definition.................................................................................30
2.3 Definition of Switches.......................................................................................................31
2.4 Definition of Connectors...................................................................................................33
Chapter 3 System Setup ..................................................................................................40
3.1 Removing Top Cover .......................................................................................................41
3.1 Installing CPU..................................................................................................................44
3.2 Installing SO-DIMM..........................................................................................................46
3.3 Installing Mini-PCIe Card..................................................................................................47
3.4 Installing M.2 E Key Card.................................................................................................48
3.5 Installing M.2 M Key Card................................................................................................49
3.6 Installing Antenna.............................................................................................................50
3.6.1 Antenna #1 to #4 ....................................................................................................50
3.6.2 Antenna #5 to #7 ....................................................................................................52
3.7 Installing Thermal Pad on MOSFET Heatsink..................................................................54

GP-3000 Series | User Manual 3
3.8 Installing Top Cover.........................................................................................................55
3.9 Installing SATA Hard Drives at Front Panel......................................................................57
3.10 Installing SIM Card .........................................................................................................60
3.11 Installing Rubber Foot Pad..............................................................................................61
3.12 Installing Wall Mount.......................................................................................................62
3.13 Installing Desktop Mount Bracket....................................................................................64
3.14 Connecting to Power Supply...........................................................................................66
Chapter 4 BIOS Setup ......................................................................................................67
4.1 BIOS Introduction.............................................................................................................68
4.2 Main Setup.......................................................................................................................69
4.3 Advanced Setup...............................................................................................................70
4.3.1 CPU Configuration..................................................................................................70
4.3.2 Power & Performance.............................................................................................71
4.3.3 SATA Configuration................................................................................................71
4.3.4 PCH-FW Configuration...........................................................................................72
4.3.5 Trusted Computing.................................................................................................73
4.3.6 ACPI Settings.........................................................................................................74
4.3.7 F81866 Super IO Configuration ..............................................................................75
4.3.8 Hardware Monitor ...................................................................................................76
4.3.9 S5 RTC Wake Settings...........................................................................................77
4.3.10 Serial Port Console Redirection............................................................................77
4.3.11 USB Configuration................................................................................................78
4.3.12 Network Stack Configuration.................................................................................79
4.3.13 CSM Configuration................................................................................................79
4.3.14 NVMe Configuration..............................................................................................81
4.4 Chipset Setup ..................................................................................................................82
4.4.1 System Agent (SA) Configuration ...........................................................................82
4.4.2 PCH-IO Configuration.............................................................................................84
4.5 Security Setup..................................................................................................................87
4.5.1 Administrator Password..........................................................................................87
4.5.2 User Password .......................................................................................................87
4.5.3 Security Boot ..........................................................................................................87
4.6 Boot Setup.......................................................................................................................88
4.6.1 Setup Prompt Timeout [1].......................................................................................88
4.6.2 Bootup NumLock State [Off] ...................................................................................88
4.6.3 Quiet Boot [Disabled]..............................................................................................88
4.6.4 Fast Boot [Disabled]................................................................................................88
4.7 Save & Exit ......................................................................................................................89
4.7.1 Save Changes and Exit ..........................................................................................89

GP-3000 Series | User Manual 4
4.7.2 Discard Changes and Exit.......................................................................................89
4.7.3 Save Changes and Reset.......................................................................................89
4.7.4 Discard Changes and Reset...................................................................................89
4.7.5 Save Changes........................................................................................................89
4.7.6 Discard Changes....................................................................................................89
4.7.7 Restore Defaults.....................................................................................................89
4.7.8 Save as User Defaults............................................................................................89
4.7.9 Restore User Defaults.............................................................................................89
Chapter 5 Product Application........................................................................................90
5.1 Digital I/O (DIO) application..............................................................................................91
5.1.1 Digital I/O Programming Guide...............................................................................91
5.2 DIO Hardware Specification.............................................................................................97
5.2.1 DIO Connector Definition........................................................................................98
5.3 GPIO LED application.....................................................................................................100
5.3.1 GPIO LED Programming Guide............................................................................100
5.4 GPIO LED Status Definition............................................................................................112
Chapter 6 Optional Modules & Accessories ................................................................113
6.1 Optional Module Pin Definition & Settings......................................................................114
6.1.1 CMI-M12LAN01-R12/UB1410 Module..................................................................114
6.1.2 CMI-COM04-R10/UB1403 Module........................................................................115
6.1.3 CFM-IGN03-R11 Module......................................................................................116
6.1.4 GEB-3301-R10 Module.........................................................................................117
6.1.5 GEB-3601-R10 Module.........................................................................................120
6.2 Installing High Speed CMI Module.................................................................................124
6.2.1 CMI-LAN01-R12/UB1412 Module.........................................................................124
6.2.2 CMI-M12LAN01-R12/UB1410 Module..................................................................126
6.2.3 CMI-10GLAN02-R10/UB1428 Module..................................................................129
6.3 Installing Low Speed CMI Module..................................................................................132
6.3.1 CMI-DIO04-R11/UB1418 Module .........................................................................132
6.3.2 CMI-COM04-R10/UB1403 Module........................................................................135
6.4 Installing CFM Module....................................................................................................138
6.4.1 CFM-PoE01 Module .............................................................................................138
6.4.2 CFM-PoE07-R10 Module......................................................................................141
6.4.3 CFM-IGN03-R11 Module......................................................................................144
6.5 Installing MEC Module ...................................................................................................145
6.5.1 MEC-USB-M102-15/UB1414 Module....................................................................145
6.6 Installing GEB-3301-R10 Module...................................................................................148
6.6.1 Installing GEB-3301-R10 Module onto GP-3000...................................................148
6.6.2 Installing GPU Card..............................................................................................151

GP-3000 Series | User Manual 5
6.6.3 Installing Rubber Foot Pad ...................................................................................159
6.6.4 Installing Wall Mount.............................................................................................160
6.7 Installing GEB-3601-R10 Module...................................................................................162
6.7.1 Installing GEB-3601-R10 Module onto GP-3000...................................................162
6.7.2 Installing GPU Card..............................................................................................166
6.7.3 Installing Rubber Foot Pad ...................................................................................175
6.7.4 Installing Wall Mount.............................................................................................177
6.8 Power Supply Cabling Guide..........................................................................................179
6.8.1 Cabling with US Power Cord.................................................................................179
6.8.2 Cabling with EU Power Cord.................................................................................181

GP-3000 Series | User Manual 6
Preface
Revision
Revision
Description
Date
1.00
First Release
2021/01/27
Copyright Notice
© 2021 by Cincoze Co., Ltd. All rights are reserved. No parts of this manual may be copied, modified,
or reproduced in any form or by any means for commercial use without the prior written permission
of Cincoze Co., Ltd. All information and specification provided in this manual are for reference only
and remain subject to change without prior notice.
Acknowledgement
Cincoze is a registered trademark of Cincoze Co., Ltd. All registered trademarks and product names
mentioned herein are used for identification purposes only and may be trademarks and/or registered
trademarks of their respective owners.
Disclaimer
This manual is intended to be used as a practical and informative guide only and is subject to
change without notice. It does not represent a commitment on the part of Cincoze. This product
might include unintentional technical or typographical errors. Changes are periodically made to the
information herein to correct such errors, and these changes are incorporated into new editions of
the publication.
Declaration of Conformity
FCC
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the

GP-3000 Series | User Manual 7
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
CE
The product(s) described in this manual complies with all application European Union
(CE) directives if it has a CE marking. For computer systems to remain CE compliant,
only CE-compliant parts may be used. Maintaining CE compliance also requires
proper cable and cabling techniques.
E-Mark
The "E" mark is based on ECE regulations issued by the Economic Commission for
Europe. It is an organizational part of the UN and the members are EU countries and
many others. Therefore, the acceptance of approved components is much broader,
especially in the eastern part of Europe. It is necessary to confirm whether a
particular country has accepted (signed) the application of an ECE-regulation; as the
application it is not mandatory for the countries.
Product Warranty Statement
Warranty
Cincoze products are warranted by Cincoze Co., Ltd. to be free from defect in materials and
workmanship for 2 years from the date of purchase by the original purchaser. During the warranty
period, we shall, at our option, either repair or replace any product that proves to be defective under
normal operation. Defects, malfunctions, or failures of the warranted product caused by damage
resulting from natural disasters (such as by lightening, flood, earthquake, etc.), environmental and
atmospheric disturbances, other external forces such as power line disturbances, plugging the
board in under power, or incorrect cabling, and damage caused by misuse, abuse, and unauthorized
alteration or repair, and the product in question is either software, or an expendable item (such as a
fuse, battery, etc.), are not warranted.

GP-3000 Series | User Manual 8
RMA
Before sending your product in, you will need to fill in Cincoze RMA Request Form and obtain an
RMA number from us. Our staff is available at any time to provide you with the most friendly and
immediate service.
◼RMA Instruction
⚫Customers must fill in Cincoze Return Merchandise Authorization (RMA) Request
Form and obtain a RMA number prior to returning a defective product to Cincoze for
service.
⚫Customers must collect all the information about the problems encountered and note
anything abnormal and describe the problems on the “Cincoze Service Form” for the
RMA number apply process.
⚫Charges may be incurred for certain repairs. Cincoze will charge for repairs to
products whose warranty period has expired. Cincoze will also charge for repairs to
products if the damage resulted from acts of God, environmental or atmospheric
disturbances, or other external forces through misuse, abuse, or unauthorized
alteration or repair. If charges will be incurred for a repair, Cincoze lists all charges,
and will wait for customer’s approval before performing the repair.
⚫Customers agree to ensure the product or assume the risk of loss or damage during
transit, to prepay shipping charges, and to use the original shipping container or
equivalent.
⚫Customers can be sent back the faulty products with or without accessories (manuals,
cable, etc.) and any components from the system. If the components were suspected
as part of the problems, please note clearly which components are included.
Otherwise, Cincoze is not responsible for the devices/parts.
⚫Repaired items will be shipped along with a "Repair Report" detailing the findings and
actions taken.
Limitation of Liability
Cincoze’ liability arising out of the manufacture, sale, or supplying of the product and its use,
whether based on warranty, contract, negligence, product liability, or otherwise, shall not exceed the
original selling price of the product. The remedies provided herein are the customer’s sole and
exclusive remedies. In no event shall Cincoze be liable for direct, indirect, special or consequential
damages whether based on contract of any other legal theory.

GP-3000 Series | User Manual 9
Technical Support and Assistance
1. Visit the Cincoze website at www.cincoze.com where you can find the latest information about
the product.
2. Contact your distributor or our technical support team or sales representative for technical
support if you need additional assistance. Please have following information ready before you
call:
⚫Product name and serial number
⚫Description of your peripheral attachments
⚫Description of your software (operating system, version, application software, etc.)
⚫A complete description of the problem
⚫The exact wording of any error messages
Conventions Used in this Manual

GP-3000 Series | User Manual 10
Safety Precautions
Before installing and using this device, please note the following precautions.
1. Read these safety instructions carefully.
2. Keep this User’s Manual for future reference.
3. Disconnected this equipment from any AC outlet before cleaning.
4. For plug-in equipment, the power outlet socket must be located near the equipment and must
be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting it fall may
cause damage.
7. Make sure the voltage of the power source is correct before connecting the equipment to the
power outlet.
8. Use a power cord that has been approved for using with the product and that it matches the
voltage and current marked on the product’s electrical range label. The voltage and current
rating of the cord must be greater than the voltage and current rating marked on the product.
9. Position the power cord so that people cannot step on it. Do not place anything over the power
cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source to avoid
damage by transient overvoltage.
12. Never pour any liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be opened only by
qualified service personnel.
If one of the following situations arises, get the equipment checked by service personnel:
⚫The power cord or plug is damaged.
⚫Liquid has penetrated into the equipment.
⚫The equipment has been exposed to moisture.
⚫The equipment does not work well, or you cannot get it work according to the user's
manual.
⚫The equipment has been dropped and damaged.
⚫The equipment has obvious signs of breakage.
14. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type recommended by the manufacturer.
15. Equipment intended only for use in a RESTRICTED ACCESS AREA.

GP-3000 Series | User Manual 11
Ordering information
Before installation, please ensure all the items listed in the following table are included in the
package. Notify your sales representative if any of the above items are missing or damaged.
GP-3000
Available Models
Model No.
Product Description
GP-3000-R10
9th/8th Gen Intel® Xeon®/Core™ GPU Computer, Supports Dual
Full-length GPU Expansion Up to 500W
Package Checklist
Item
Description
Q’ty
1
Wall Mount Bracket
1
2
Desktop Mount Kit
1
3
CPU Heat Sink and Thermal Pad
1
4
Screws Pack
4
5
Rubber Foot Kit
1
6
Power Terminal Block Connector
2
7
Remote Function Terminal Block Connector
2
8
Utility DVD Driver
1

GP-3000 Series | User Manual 12
GEB-3301-R10
Available Models
Model No.
Product Description
GEB-3301-R10
GPU Expansion Box with 1 x PCIe x 16 and 1 x PCIe x 4 Slots for
GP-3000 Series
Package Checklist
Item
Description
Q’ty
1
Wall Mount Bracket
1
2
8 Pin to 6+2 Pin GPU Power Cable
2
3
Screws Pack
2
4
GPU Card Retainer Screw Pack
1
5
Rubber Foot Kit
1
6
Sponge
2
GEB-3601-R10
Available Models
Model No.
Product Description
GEB-3601-R10
GPU Expansion Box with 2 x PCIe x 16 (Signal PCIe x 8), 1 x PCIe x 4
and 1 x PCIe x 1 Slots for GP-3000 Series
Package Checklist
Item
Description
Q’ty
1
Wall Mount Bracket
1
2
8 Pin to 6+2 Pin GPU Power Cable
4
3
Screws Pack
2
4
GPU Card Retainer Screw Pack
1
5
Rubber Foot Kit
1
6
Sponge
4

GP-3000 Series | User Manual 13
Chapter 1
Product Introductions

GP-3000 Series | User Manual 14
1.1 Overview
GP-3000. A flagship GPU edge computing computer of Cincoze. Its crowning feature is an exclusive
GPU Expansion Box that provides expansion for up to two high-end GPU cards and creating a
high-performance industrial-grade GPU computing computer.
Extreme Computing Performance
The GP-3000’s extreme computing power starts with an 8th or 9th generation Intel® Xeon® or
Core™ i3/i5/i7 (Coffee Lake and Coffee Lake-R) CPU, Intel® C246 chipset, and supports two sets of
DDR4-2666 ECC/non-ECC SO-DIMM up to 64 GB and can support up to two 250 W high-end GPU
cards. With a total power consumption of 720W, it’s easy to meet and exceed high-efficiency
application requirements. A precision heat dissipation and cooling design quickly wick away heat,
keeping the focus squarely on the breathtaking performance of the GP-3000.
Rich Application Functions
The GP-3000 redefines the standard for high-end GPU computers, with high-speed I/O and multiple
functions. In addition to the standard five LAN ports and six USB 3.2 ports, the GP-3000 uses
Cincoze’s exclusive CMI and CFM modular design, which offers expansion modules with eight
Gigabit PoE, two USB 3.2, or dual 10 Gb/s LAN ports. Storage options include high-speed M.2
NVMe storage slots and four hot-swappable 2.5” HDD/SSD trays accessible through the front
maintenance panel. Together, they meet large-capacity machine vision storage requirements and
improve hard disk accessibility for convenient removal and replacement. The IGN module (power
ignition sensing) can monitor the on-board battery voltage and set a delayed shutdown time to avoid
damage to the system due to unstable current when starting or turning off the engine. This
combination of diverse functions provides the flexibility to meet the requirements of different market
applications.
Strong and Durable
In the pursuit of ever-higher standards, the GP-3000 has passed the MIL-STD-810G certification
(pending) designed and promulgated by the US Department of Defense to qualify military equipment.
The GP-3000 features 9~48 VDC power input, is built for -40 to 70°C temperature operation. The
GP-3000 has E-mark and EN50155 (EN50121-3-2 only) certifications, so it is capable of
withstanding the rigors of rail and vehicle applications as well as other harsh environments.

GP-3000 Series | User Manual 15
1.2 Highlights
Cutting-Edge Performance
Futureproof Scalability
Mount Anywhere
The GP-3000 is powered by the excellent
performance of 8th / 9th generation Intel®
Xeon® / Core™ processors. Supports two
DDR4 SO-DIMM ECC/Non-ECC memory,
up to 64GB. Through the exclusive GPU
Expansion Box (GEB) design can flexibly
expand up to dual high-end GPU cards.
And GP-3000 offers 720W system power
budget for high-end GPU Computing
applications.
Upgrades are now easy. In addition to GPU
expansion through the GEBs, the GP-3000
also retains flexibility for future upgrades.
Whether adding or upgrading GPU cards,
the core system remains, and only the GBE
is changed. Upgrades become easier, and
the expansion possibilities become almost
endless.
The GP-3000 supports multiple mounting
options for various environment. Mounting
options include a wall mount, desktop
mount, Face-up mount, and 19” rack
mount. Simple.

GP-3000 Series | User Manual 16
1.3 Product Pictures
GP-3000

GP-3000 Series | User Manual 17
GP-3000/GEB-3301

GP-3000 Series | User Manual 18
GP-3000/GEB-3601

GP-3000 Series | User Manual 19
1.4 Key Features
GP-3000
⚫Supports 9th/8th Gen Intel® Xeon®/Core™ Processor (35W / 65W / 80W)
⚫2 x DDR4 SO-DIMM Sockets, Supports ECC/non ECC type up to 2666 MHz, 64GB
⚫4 x 2.5" Hot Swappable SATA III HDD/SSD Bays (Max Height 15 mm)
⚫1 x M.2 M Key Socket (NVMe), 1 x M.2 E Key Socket (CNVi)
⚫2 x Front Accessible SIM Card Slots for Signal Redundancy
⚫CMI Technology for Various I/O Module Expansions
⚫CFM Technology for Power Ignition Sensing & PoE Function
⚫Versatile Mounting Methods (Wall / Stand / Face-up / 19” Rack Mount)
⚫Military Standard Shock & Vibration Proof (pending)
GEB-3301
⚫Support 1 x PCIe x16 Slot for full-length GPU card Expansion
⚫Support 1 x PCIe x4 Slot for Add-on card Expansion
⚫Intelligent Cooling Design for High Performance GPU Card
⚫Military Standard Shock & Vibration Proof (pending)
GEB-3601
⚫Supports 2 x PCIe x16 Slots for full-length GPU cards Expansion
⚫Supports 1 x PCIe x4 Slot and 1 x PCIe x1 slot for Add-on cards
⚫Intelligent Cooling Design for High Performance GPU Card
⚫Military Standard Shock & Vibration Proof (pending)

GP-3000 Series | User Manual 20
1.5 Hardware Specification
GP-3000
Processor
• 9th Generation Intel® Coffee Lake-R S Series CPU:
- Intel®Xeon®E-2278GE 8 Cores Up to 4.7 GHz, TDP 80W
- Intel®Xeon®E-2278GEL 8 Cores Up to 3.9 GHz, TDP 35W
- Intel®Core™ i7-9700E 8 Cores Up to 4.4 GHz, TDP 65W
- Intel®Core™ i5-9500E 6 Cores Up to 4.2 GHz, TDP 65W
- Intel®Core™ i3-9100E 4 Cores Up to 3.7 GHz, TDP 65W
- Intel®Core™ i7-9700TE 8 Cores Up to 3.8 GHz, TDP 35W
- Intel®Core™ i5-9500TE 6 Cores Up to 3.6 GHz, TDP 35W
- Intel®Core™ i3-9100TE 4 Cores Up to 3.2 GHz, TDP 35W
• 8th Generation Intel®Coffee Lake CPU:
- Intel® Xeon®E-2176G 6 Cores up to 4.7 GHz, TDP 80W
- Intel® Xeon®E-2124G 4 Cores up to 4.5 GHz, TDP 71W
- Intel® Core™ i7-8700 6 Cores up to 4.6 GHz, TDP 65W
- Intel® Core™ i5-8500 6 Cores, up to 4.1 GHz, TDP 65W
- Intel® Core™ i3-8100 4 Cores 3.6 GHz, TDP 65W
- Intel® Core™ i7-8700T 6 Cores up to 4.0 GHz, TDP 35W
- Intel® Core™ i5-8500T 6 Cores up to 3.5 GHz, TDP 35W
- Intel® Core™ i3-8100T 4 Cores 3.1 GHz, TDP 35W
- Intel® Pentium®G5400 2 Cores 3.7 GHz, TDP 58W
- Intel® Pentium®G5400T 2 Cores 3.1 GHz, TDP 35W
- Intel® Celeron®G4900 2 Cores 3.1 GHz, TDP 54W
- Intel® Celeron®G4900T 2 Cores 2.9 GHz, TDP 35W
Chipset
• Intel® C246
BIOS
• AMI BIOS
Memory
• 2x DDR4-2666/2400 MHz SO-DIMM Socket
• Support ECC / non-ECC Type Up to 64 GB
* Xeon/i7/i5: Up to DDR4 2666MHz
* i3/Pentium/Celeron: Up to DDR4 2400 MHz
Graphics
• Integrated Intel®UHD Graphics
(Xeon/i7/i5/i3: UHD 630; Pentium/Celeron: UHD 610)
• Supports Triple Independent Display (VGA/DisplayPort/HDMI)
Audio
• Realtek®ALC888, High Definition Audio
I/O Interface
• 1x HDMI Connector (4096 x 2160 @ 30Hz)
• 1x DisplayPort Connector (4096 x 2340 @ 60Hz)
• 1x VGA Connector (1920 x 1200 @30Hz)
• 5x GbE LAN, RJ45
- GbE1: Intel® I219-LM
- GbE2: Intel® I210-IT
- GbE3: Intel® I210-IT
- GbE4: Intel® I210-IT
- GbE5: Intel® I210-IT
• 2x RS-232/422/485 with Auto Flow Control (Support 5V/12V), DB9
• 2x 10Gbps USB3.2 Gen2 Ports, Type-A
• 4x 5Gbps USB3.2 Gen1 Ports, Type-A
• 1x Line-out & 1x Mic-in, Phone Jack 3.5mm
• 1x ATX Power On/Off Button
• 1x Remote Power On/Off, 2-pin Terminal Block
• 1x Remote Reset, 2-pin Terminal Block
• 1x AT/ATX Mode Switch
• 1x Reset Button
• 1x Clear CMOS Switch
Storage
• 4x 2.5” Front Accessible SATA HDD/SSD Bay (SATA 3.0),
Supports up to 15mm in Height
• 1x M.2 Key M 2280 Socket, Supports PCIe x4 NVMe SSD or
SATA SSD (GEN3)
• Supports RAID 0/ 1/ 5/ 10
Expansion
• PCIe
Optional GPU Expansion Box
- 1 x PCIe x 4 + 1 x PCIe x 16
- 2 x PCIe x 16 (8 Lanes) + 1 x PCIe x 1 + 1 x PCIe x 4
• 2x Full-size Mini-PCIe Socket
• 1x M.2 Key E 2230 Socket, Supports Intel CNVi Module
• 1x M.2 Key M 2280 Socket, Support NVMe/SATA SSD
• 1x Universal Bracket
• 2x SIM Sockets
• 7x Antenna Holes
Cincoze Modular Technology
• CMI Interface
1 x High Speed CMI (Combined Multiple I/O) Interface
1 x Low Speed CMI (Combined Multiple I/O) Interface
• CMI Module
Optional Modules:
- 4x GbE LAN, RJ45
- 4x GbE LAN, M12 A-Coded
- 2x 10GbE LAN, RJ45
- 2x RS-232/422/485 with Auto Flow Control (Supports 5V/12V),
DB9
- 16x Optical Isolated DIO (8DI, 8DO), 2x 10 Pin Terminal Block
• CFM Interface
1x CFM (Control Function Module) IGN Interface
1x CFM (Control Function Module) PoE Interface
• CFM Module
Optional Module
- 1x Power Ignition Sensing Module with Delay Time
Management and Selectable 12V/24V
- 1x PoE Function Module Supports Up to 4x PoE+ with
Individual port 25.5W
• MEC Module
Optional Modules:
- 2x 5Gbps USB 3.2 Gen1, Type A
- 2x GbE LAN, RJ45