Cine Gears Esprocker Operator's manual

The Quick Instruction of Cinegears
Esprocker Digital Wireless Controller
V1.0
© 2015 CINEGEARS All Rights Reserved
Esprocker Controller
And
Different Perspective Views

Turn On/O Esprocker Controller
Automatic Lens Calibration
Hold the (REC) and (A) button for three seconds.
Manuel Lens Calibration
Hold the (REC) and (B) button for three seconds. Press the (A) button to rotate the
lens clockwise, then press the (A) button again to stop the rotation and press the
(REC) button to set the start point. Press the (B) button to rotate counter clockwise
and press the (B) button again to stop the rotation, then press the (REC) button
to choose the end point.
Setting up Two Preset points
Push the rocker swtich button on your esprocker controller to a lens focus distance
point, then press and hold the (A) button for three seconds to record that point.
Then move on to the next lens focus distance point, press and hold the (B) button
for three seconds to record your second lens focus distance point.
Setting up Preset
Hold the (A) and (B) button for three seconds to get the accessibility to the esprocker
function manual. F01 is the motor rotating speed option. F03 is the manual lens
calibration option. F05 is the recalibrating focus controller option. F06 is the
direction display option.
7 Recalibrating Focus Controller
After you get to your esprocker function manual, go to the F05 function. Push the
rocker swtich button to the left end point then press the (REC) button. Push the
rocker swtich button again to the right end point then press the (REC) button
again. This sets up your full camera lens traveling distance with your esprocker’s
rocker swtich button distance from left to right that you have set.
Esprocker
Hold the (REC) button for three seconds to turn the esprocker controller on/o.
Synchronize Esprocker Controller and Motor
Hold the button on the motor for three seconds then hold all three buttons on the
esprocker controller for three seconds.
© 2015 CINEGEARS All Rights Reserved

CINEGEARS Esprocker Digital Wireless Rocker Switch
Controller KIT User Manual
V1.0
© 2015 CINEGEARS All Rights Reserved

Specifications
© 2015 CINEGEARS All Rights Reserved
Esprocker Controller
It is the smallest wireless solution for solo camera operation. The unit sports
an REC trigger, a small LED screen, a focus switch, and the ability to store up to
two focus presets.
With our latest Wireless Esprocker Controller, you can deliver a reliable signal
from up to 100 meters away. It allows users to control lens focus and camera REC
start/stop from nger tip, making it perfect for jib, Steadicam, or MoVI shots.
The build in Panasonic rechargeable batter provides up to 8 working hours power.
15 digital speed mood for smooth transition from 2 focus preset.
You won’t nd anything more compact or functional.
Pick up this ultra durable unit from the store.
Introduction
- Small, Light, Rocker Switch
- LED screen to show focus depth
- Set up to two focus presets
- Remote REC trigger
- 100 Meter Wireless Control Range
- Mountable Side Bracket
- Adjustable Rocker Switch
- USB Charger 8 Hour Internal Battery
- Compact design

Esprocker Full Instruction
1. Turn On/Off Esprocker Controller
2. Synchronize Esprocker Controller and Motor
3. Automatic Lens Calibration
4. Manual Lens Calibration
Hold the (REC) button on your esprocker controller for three seconds to turn
it on. When your esprocker controller is on, hold the (REC) button for three
seconds to turn it off. The number that shows up on your esprocker controller
when you turn it on is the esprocker controller’s battery percentage.
Hold the button on your motor that flashes blue for three seconds, when the
button’s light turns green, press and hold all three buttons, (REC), (A) and (B) on
your esprocker controller for three seconds. In this way, it synchronizes both the
esprocker controller and motor together.
Hold the (REC) button for three seconds to turn the esprocker controller on/off.
Hold the button on the motor for three seconds then hold all three buttons on
the esprocker controller for three seconds.
Hold the (REC) and (A) button for three seconds.
After your esprocker controller and motor are synchronized, press and hold
(REC) and (A) button on your esprocker controller at the same time for three
seconds, this activates the automatic lens calibration. This option is for the
camera lens that has the hard stops. For the camera lens that does not have
the hard stops, read the following manual lens calibration below.
Hold the (REC) and (B) button for three seconds. Press the (A) button to rotate
the lens clockwise, then press the (A) button again to stop the rotation and press
the (REC) button to set the start point. Press the (B) button to rotate counter
clockwise and press the (B) button again to stop the rotation, then press the
(REC) button to choose the end point.
After your esprocker controller and motor are synchronized, press and hold
the (REC) and (B) button on your esprocker controller at the same time for three
seconds until S-1 flashes. Then press and hold the (A) button for three seconds
until the gear rotates. When your camera lens reaches the minimum focus
distance, press on the (A) button again which makes the gear stop rotating.
Then press the (REC) button to set your camera minimum focus distance
point. After you set the minimum focus distance point, S-2 should be flashing.
Then press and hold the (B) button for three seconds, the gear will rotate to the
opposite direction. When it reaches your camera’s maximum focus distance point,
you have to press the (B) button again to stop the rotation of the gear. Then
press the (REC) button to set the camera’s maximum focus distance. Remember,
you can always press on the (A) button or the (B) button for the micro adjustments
when it passes the camera’s focus distance.
© 2015 CINEGEARS All Rights Reserved

Setting up Two Preset points
Push the rocker switch on your esprocker controller to a lens focus distance
point, then press and hold the (A) button for three seconds to record that point.
Then move on to the next lens focus distance point, press and hold the (B)
button for three seconds to record your second lens focus distance point.
Setting up Preset
Hold the (A) and (B) button for three seconds to get the accessibility to the
esprocker function manual. F01 is the motor rotating speed option. F03 is the
manual lens calibration option. F05 is the recalibrating focus controller option.
F06 is the direction display option.
7 Recalibrating Focus Controller
First, go to your esprocker function manual by pressing and holding the (A) and
(B) button for three seconds at the same time. Then, go to the F05 function by
pressing the (B) button for four times and press the (REC) button to enter that
function. Push the rocker switch button to the left end point and press the (REC)
button to record that rotation angle. Then, push the rocker switch button again to
the right end, and press the (REC) button again to record your second rotation
angle. This sets up your full camera lens traveling distance to the rocker switch
travelling distance you have set. In other words, the rotating distance of your
camera lens will lengthen while the distance of the esprocker rocker switch button
will shorten.
When you press and hold the (A) and (B) button on your esprocker controller for
three seconds, this gives you the accessibility to your esprocker controller’s
function manual. To enter each function you can just simply press the (REC)
button. The F01 function is the speed control which makes the gear rotate on a
different range of speed. Press on the (A) or (B) button to change the number,
the larger the number goes, the faster the gear rotates. After you choose a speed
number, press the (REC) button again to let your espresso controller to record
that number.
After you get to your esprocker function manual, go to the F05 function. Push
the rocker switch button to the left end then press the (REC) button. Push the
rocker switch button again to the right end then press the (REC) button again.
© 2015 CINEGEARS All Rights Reserved

Disclaimers
Congratulations on purchasing your new CINEGEARS product. Please read this manual carefully
before using the product. By using this product, you hereby agree to this disclaimer and signify that
you have read it in full. You agree that you are responsible for your own conduct and any content
created while using CINEGEARS products, and for any consequence thereof. You agree to use
this product only for purposes that are proper and in accordance with local regulations, terms and
any applicable polices and guidelines.
By reading this disclaimer, you also agree:
1, Any part of this disclaimer is subject to change without prior notice. Refer to
WWW.CINGEARS.COM for the latest version.
2, CINEGEARS reserves the right of final interpretation of this disclaimer.
CINEGEARS and the Follow Focus Kit are registered trademarks of Llittlecent International
Trading Corp. as names of product, brand, etc., appearing in this manual are trademarks or
registered trademarks of their respective owner companies. This product and manual are
copyrighted by CINEGEAS with all rights reserved. No part of this product or manual shall be
reproduced in any form without the prior written consent or authorization of CINEGEARS.
ONLINE SUPPORT
© 2015 CINEGEARS All Rights Reserved
CINEGEARS
Please CINEGEARS.COM to check the latest version
http://cinegears.com/?page_id=1084
Cinegears is an industry leading company that designs and manufactures digital wireless follow
focus systems, lens control systems, camera motion control systems and accessories for film and
broadcast industry. As a big believer in the power of creativity and ideas, we designed the wireless
motor drive that integrated a built in wireless transmitter, and the wireless finger wheel controller.
The Cinegears wireless lens control system has international CE certification on all its equipment.
CINEGEARS lens control system can achieve the finest minutia of focus pulling, with extreme
accuracy and control. It provides smooth focus control for shooting 4k footage at an affordable price.
We have been doing this for three years and our equipment has been used on hundreds of movies.
Filmmakers of all experience levels will benefit greatly from a simple, professional, and well rounded
follow focus system. The Single Axis, and Multi Axis models provide greater ease, with less crew,
and less wires. You can achieve professional film quality scenes on a shoestring budget. Camera
operators, assistant camera operators, and jib operators can use the wireless follow focus to attain
that perfect shot.