Cino FuzzyScan Series User manual

FUZZYSCAN FAMILY
Quick Start Guide
Bluetooth Version
CORDLESS SCANNER

1
About This Guide
Thank you for choosing Cino’s FuzzyScan cordless handheld imager. Powered
by Cino’s exclusive imaging technology, rich features, and Bluetooth
connectivity, this imager not only provides outstanding reading performance
but also boosts your productivity with great user experience.
This quick start guide serves as a quick reference for imager installation and
operation. The complete documentation is available at www.cino.com.tw.
Applicable Models
800 Series Ultra-rugged Cordless Imagers
A898BT, A888BT
F898BT, F888BT
700 Series Enterprise Cordless Imagers
A798BT, A790BT, A788BT, A780BT, A778BT, A770BT
F798BT, F790BT, F788BT, F780BT, L788BT, L780BT
A798BT HC, A790BT HC, A788BT HC, A780BT HC
F788BT HC, F780BT HC, L788BT HC, L780BT HC
600 Series Commercial Cordless Imagers
A698BT, A690BT, A688BT, A680BT, A678BT, A670BT
F688BT, F680BT, L688BT, L680BT
Wireless Charging models are indicated in “Gray”.
UltraCapTM Battery-free solution is available for all imagers.
Applicable Kits
FuzzyScan cordless handheld imagers are available in various sales kits with
corresponding accessories. For more information, please contact your sales
representative.
Useful Features
To enhance user experience and usability, FuzzyScan cordless handheld
imagers provide a collection of unique features called FuzzyScan DNA, such
as DataWizard Premium, iCode, Multilingual Edge, Smart Scene, Security
Plus, and FuzzyScan Enabling Solution. For more details, please visit Cino’s
website at www.cino.com.tw.
1D & 2D Imagers
1D & PDF Imagers

2
Status Indicators
DC Power Jack
Mounting Hole B
Cable Groove
Paging Button
Mounting Hole A
LAN Port (Ethernet)
Buzzer
Quick Pair Barcode
Magnet Plate
Host Interface Port
Mounting Hole C
Getting Familiar with Your Imager
800 Series Wireless Charging
A898BT, A888BT, F898BT, F888BT
HB8133 Smart Cradle
To use HB8133 Smart Cradle for Wall Mount application, please refer to
the user manual for details.
Window Chassis (Gray)
Trigger
Link Indicator
Reset Button
Screw-on Locker
Diffuser (Trans. White)
End Cap
Hanger Bracket
USB-C Port
End Cap Cover
CLOSE
OPEN
Scan Window
Beeper
Status Indicator
Battery Cavity
Cover Lift
Ethernet Model Only

3
600 &700 Series Wireless Charging
A798BT, A788BT, A778BT F798BT, F788BT, L788BT
A698BT, A688BT A678BT, F688BT, L688BT
HB4132 Wireless Charging Smart Cradle
Link Indicator
Status Indicator
Reset Button
Screw Hole
Scan Window
Beeper
USB-C Port
End Cap Cover
Trigger
End Cap
Battery Cavity
Paging Button
DC Power Jack
Status Indicators
Host Interface Port
Link Indicator
Quick Pair Barcode

4
600 &700 Series Contact Charging
A790BT, A780BT, A770BT F790BT, F780BT, L780BT
A690BT, A680BT A670BT, F680BT, L680BT
HB2112 Smart Cradle
Link Indicator
Status Indicator
End Cap
Charging Contact
Scan Window
Beeper
Battery Cavity
Trigger
Reset Button
Screw Hole
Status Indicators
Host Interface Port
Link Indicator
Quick Pair Barcode
Paging Button
DC Power Jack

5
Preparations before Use
Install the Battery or UltraCapTM
Slide the battery or UltraCapTM into the cavity until a “click”is heard.
Seal the cavity with end cap and tighten it using the provided screw.
Charge Your Imager
Prior to the initial use, charge the battery for 4 hours or UltraCapTM for 50
minutes respectively.
Connect the power supply unit to the electrical outlet, then plug the DC
power cord into the cradle’s DC Jack.
Place the cordless imager onto the cradle for charging.

600 & 700 Series
Wireless Charging Model
600 & 700 Series
Contact Charging Model
800 Series
Wireless Charging Model
To use the Wireless Charging Cradle (HB8133 and HB4132) for
battery charging, you have to use the power supply unit as
power source to ensure that wireless charging works properly.

6
Work with Smart Cradle
By working with the smart cradle, FuzzyScan cordless imager provides a
plug-and-play cordless migration of your non-Bluetooth-enabled host. You
can use either PAIR mode or PICO mode for your needs.
Pair Your Imager with Smart Cradle
Please choose your desired interface cable, then plug its RJ50 connector
into the host interface port of the smart cradle and connect the cable to
the host.
If the imager is shipped together with a smart cradle, they are
pre-paired already. Once powered up, the link indicator of imager emits
blue blinks in preset intervals, and the link indicator of smart cradle
remains in active blue. If so, you can skip instructions 3 to 5.
If your imager or smart cradle is in the uninstall state, their status
indicators will blink alternatively in red and green. Follow the
instructions below to pair your imager with the smart cradle.
Scan the Quick Pair Barcode on the smart cradle to launch a pairing
attempt. The imager will emit a series of clicking sounds, and its link
indicator will rapidly blink blue until the pairing process is completed.
After successful pairing, the imager’s link indicator will blink blue in
preset intervals, and the smart cradle's link indicator will be active blue.
The default host interface is USB HID, you may switch to your desired
host interface by scanning the command barcode below to complete
your installation.
The cordless imager works as a generic USB HID
keyboard. You can enable the Data Merge to get a
faster transmission.
The cordless imager works as a serial device via USB
interface.
The cordless imager works as a standard RS232
serial device.
USB HID
USB COM
RS232 Serial
RS232
USB
RJ50
RJ50

7
Work with Bluetooth Direct Link
FuzzyScan imagers can work with remote Bluetooth hosts via Bluetooth
directly. Choose HID or SPP mode for Windows, Linux, or Android devices.
For macOS or iOS devices, only HID mode is available. Please follow the
procedures below to pair the imager with your desired Bluetooth host.
Select your desired Bluetooth link mode, then scan the corresponding
command barcode. Your imager will enter the discoverable state.
After successful pairing, the link indicator of imager will blink blue in
preset intervals.
The cordless imager works as a generic Bluetooth
Keyboard. You can enable the Data Merge to get
faster transmission rate.
The cordless imager works as a serial device via
Bluetooth radio interface.
To use the Bluetooth SPP Master mode, please refer to the User Manual.
Work as a USB Corded Imager
The wireless charging model can work as a USB corded imager by following
the procedures below.
Plug a USB-C connector of USB cable into the
USB-C port at the bottom of the Wireless
Charging imager.
Connect the USB cable to your desired Host USB
Port.
Scan “Enter Corded Mode”command barcode
to switch the imager to corded mode.
Scan “Exit Corded Mode” command barcode to
switch back to the cordless mode.
BT HID Mode
BT SPP Mode
Enter Corded Mode
Exit Corded Mode
Host USB Port
Imager USB-C Port

8
USB Keyboard Interface Settings
For USB Keyboard Interface (USB HID), the imager is preset to US keyboard
output. You can scan the corresponding command barcode below to select
your desired country keyboard layout.
Keyboard Country Layout
USA▲(QWERTY)
Latin America (QWERTY)
UK (QWERTY)
France (AZERTY)
Netherlands (QWERTY)
Japan (DOS/V)
Germany (QWERTZ)
Canadian French
(QWERTY)
Denmark (QWERTY)
Czech (QWERTY)
Spain (Latin America)
Italy (QWERTY)
Norway (QWERTY)
Portugal (QWERTY)
Iceland (QWERTY)

9
Thai (Kedmanee)
Sweden/Finland
(QWERTY)
Arabic101 (QWERTY)
Vietnamese (QWERTY)
Swiss German
(QWERTY)
Russian
Russian (Typewriter)
Belgium (AZERTY)
If the “Universal”layout is selected, the scanned data will be sent as a
sequence of “Alt Code” outputs. Please note that the “Universal”layout
only works properly under Microsoft Windows hosts.
Keyboard Record Suffix
NONE
RETURN ▲
SPACE
TAB
Universal