Cisco D9054 Operating instructions

Cisco D9054
HDTV Encoder
Installation and Operation Guide
Software Version 4.2

Please Read This Entire Guide
Veuillez lire entièrement ce guide
Bitte das gesamte Handbuch durchlesen
Sírvase leer completamente la presente guía
Si prega di leggere completamente questa guida
Important:
Please read this entire guide before you install or operate this product. Give
particular attention to all safety statements.
Important:
Veuillez lire entièrement ce guide avant d'installer ou d'utiliser ce produit. Prêtez
une attention particulière à toutes les règles de sécurité.
Zu beachten:
Bitte lesen Sie vor Aufstellen oder Inbetriebnahme des Gerätes dieses Handbuch in
seiner Gesamtheit durch. Achten Sie dabei besonders auf die Sicherheitshinweise.
Importante:
Sírvase leer la presente guía antes de instalar o emplear este producto. Preste
especial atención a todos los avisos de seguridad.
Importante:
Prima di installare o usare questo prodotto si prega di leggere completamente
questa guida, facendo particolare attenzione a tutte le dichiarazioni di sicurezza.

Notices
Trademark Acknowledgements
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its
affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at
www.cisco.com/go/trademarks.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
Other third party trademarks mentioned are the property of their respective owners.
The use of the word partner does not imply a partnership relationship between Cisco
and any other company. (1009R).
Publication Disclaimer
Cisco Systems, Inc. assumes no responsibility for errors or omissions that may appear in
this publication. We reserve the right to change this publication at any time without
notice. This document is not to be construed as conferring by implication, estoppel, or
otherwise any license or right under any copyright or patent, whether or not the use of
any information in this document employs an invention claimed in any existing or later
issued patent.
Copyright
© 2011 Cisco Systems, Inc. All rights reserved. Printed in the United States of America.
Information in this publication is subject to change without notice. No part of this
publication may be reproduced or transmitted in any form, by photocopy, microfilm,
xerography, or any other means, or incorporated into any information retrieval system,
electronic or mechanical, for any purpose, without the express permission of Cisco
Systems, Inc.
AVC/MPEG-4/H.264 Products
With respect to each AVC/MPEG-4/H.264 product, Cisco is obligated to provide the
following notice:
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE
FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO (i)
ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD ("AVC VIDEO")
AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER
ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS
OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO
LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE
HTTP://WWW.MPEGLA.COM.
Accordingly, please be advised that service providers, content providers and
broadcasters are required to obtain a separate use license from MPEG LA prior to any
use of AVC/MPEG-4/H.264 encoders and/or decoders.

4038938 Rev A D9054 HDTV Encoder Installation and Operation Guide v
Safety Precautions
Protect yourself from electric shock and your system from damage!
• This product complies with international safety and design standards. Observe all safety
procedures that appear throughout this guide, and the safety symbols that are affixed to
this product.
• If circumstances impair the safe operation of this product, stop operation and secure this
product against further operation.
Avoid personal injury and product damage! Do not proceed beyond any symbol until
you fully understand the indicated conditions!
Power
•Important! This is a Class I product. You must earth this product.
This equipment may have up to two power supply cords. To reduce the risk of electric
shock, two power supply cords may have to be disconnected before servicing.
• This product plugs into a socket-outlet. The socket-outlet must be near this product, and
must be easily accessible.
You will find this symbol on the product and/or in the literature that
accompanies this product.
It indicates important operating or maintenance instructions.
You may find this symbol on the product and/or in the literature that
accompanies this product.
It indicates a live terminal; the symbol pointing to the terminal device.
You may find this symbol on the product and/or in the literature that
accompanies this product.
It indicates a protective earth terminal.
You may find this symbol on the product and/or in the literature that
accompanies this product.
It indicates excessive or dangerous heat.

vi D9054 HDTV Encoder Installation and Operation Guide 4038938 Rev A
Safety Precautions, Continued
• Connect this product only to the power source that is indicated on the rear panel of this
product.
• If this product does not have a mains power switch, the power cord serves this purpose.
Enclosure
• Do not allow moisture to enter this product.
• Do not open the enclosure of this product unless otherwise specified.
• Do not push objects through openings in the enclosure of this product.
Cables
• Always disconnect all power cables before servicing this product.
• Always pull on the plug or the connector to disconnect a cable. Never pull on the cable
itself.
• Do not walk on or place stress on cables or plugs.
Factory service
• Refer service only to service personnel who are authorized by the factory.

4038938 Rev A D9054 HDTV Encoder Installation and Operation Guide vii
Règles de sécurité
Protégez-vous des risques d'électrocution et protégez votre système contre les
endommagements éventuels.
• Ce produit respecte les standards internationaux de sécurité et de conception. Veuillez
observer toutes les procédures de sécurité qui apparaissent dans ce guide, ainsi que les
symboles de sécurité qui figurent sur le produit.
• Si, du fait des circonstances, ce produit cesse de fonctionner normalement, cessez de
l'utiliser et empêchez-en l'utilisation future.
Évitez le risque de blessures et de dommages aux produits! Ne procédez à aucune tâche
tant que vous n'aurez pas entièrement assimilé les conditions indiquées par un symbole!
Alimentation
•Important! Ce produit fait partie de la classe I. Vous devez le mettre à la terre.
• Ce produit se branche dans une prise murale. Cette dernière doit être placée à proximité
du produit et doit être facilement accessible.
• Ne branchez ce produit qu'à la source d'alimentation indiquée sur son panneau arrière.
• Si ce produit n'a pas d'interrupteur d'alimentation générale, le cordon d'alimentation
remplit ce rôle.
Enceinte
• Ne laissez pas l'humidité pénétrer dans ce produit.
• N'ouvrez pas l'enceinte de ce produit, sauf instructions contraires.
• Ne forcez pas d'objets dans les ouvertures du boîtier.
Câbles
• Débranchez toujours tous les cordons d'alimentation avant de réparer ce produit.
• Tirez toujours sur la prise ou le connecteur pour débrancher un câble. Ne tirez jamais
directement sur le câble.
• Ne marchez pas sur les câbles ou les prises et n'y exercez aucune pression.
Réparations effectuées à l'usine
• Ne confiez les travaux de réparations qu'au personnel autorisé par l'usine.
Ce symbole figure dans la documentation accompagnant ce produit. Il indique
d'importantes instructions de fonctionnement ou d'entretien.
Ce symbole peut être attaché à ce produit. Il indique une borne sous tension; la
direction indique la borne.
Ce symbole peut être attaché à ce produit. Il indique une borne de terre de
protection.
Ce symbole peut être attaché à ce produit. Il indique une température excessive ou
dangereuse.

viii D9054 HDTV Encoder Installation and Operation Guide 4038938 Rev A
Sicherheitsvorkehrungen
Schützen Sie sich gegen elektrischen Schlag, und Ihr Gerät gegen Beschädigung!
• Dieses Gerät entspricht internationalen Sicherheits-und Ausführungsnormen. Beachten
Sie alle in diesem Handbuch enthaltenen Sicherheitshinweise sowie die am Gerät
angebrachten Warnzeichen.
• Sollten örtliche Umstände den sicheren Betrieb dieses Gerätes beeinträchtigen, schalten
Sie es ab und sichern es gegen weitere Benutzung.
Vermeiden Sie Verletzungen sowie Beschädigung des Gerätes! Wenn Sie zu einem der
folgenden Warnzeichen gelangen, nicht weiterarbeiten, bis Sie seine Bedeutung voll
verstanden haben!
Netzspannung
•Wichtig! Dieses Gerät ist ein Produkt der Schutzklasse I. Es muß geerdet werden.
• Das Gerät ist an einer Steckdose anzuschließen. Diese muß sich leicht zugänglich in
unmittelbarer Nähe des Gerätes befinden.
• Die Netzversorgung muß den auf der Rückwand des Gerätes angegebenen Werten
entsprechen.
• Falls sich kein Hauptschalter am Gerät befindet, dient das Netzkabel diesem Zweck.
Gehäuse
• Das Innere des Gerätes ist vor Feuchtigkeit zu schützen.
• Das Gehäuse ist nicht zu öffnen.
• Niemals einen Gegenstand durch die Gehäuseöffnungen einführen!
Kabel
• Vor jeglicher Wartung des Gerätes sind alle Kabel zu entfernen.
• Hierzu grundsätzlich am Stecker oder Verbindungsstück und niemals am Kabel selber
ziehen.
• Nicht auf die Kabel oder Stecker treten oder diese einer Zugbelastung aussetzen.
Hersteller-Wartung
Wartungsarbeiten sind nur durch vom Hersteller autorisierte Techniker vorzunehmen.
Dieses Symbol erscheint auf dem Gerät und/oder in der ihm beiliegenden Literatur.
Es bedeutet wichtige, zu beachtende Betriebs-oder Wartungsanweisungen.
Wenn dieses Zeichen am Gerät angebracht ist, warnt es vor einer
spannungsführenden Stelle.
Dieses Symbol kennzeichnet auf dem Gerät die Anschlußstelle der Sicherheitserde.
Wenn dieses Zeichen am Gerät angebracht ist, warnt es vor heißen Stellen, die zu
Verbrennungen führen können.

4038938 Rev A D9054 HDTV Encoder Installation and Operation Guide ix
Precauciones de seguridad
¡Protéjase contra la electrocución y proteja su sistema contra los daños!
• Este producto cumple con los criterios internacionales de seguridad y diseño. Observe
todas los procedimientos de seguridad que aparecen en esta guía, y los símbolos de
seguridad adheridos a este producto.
• Si las circunstancias impiden la operación segura de este producto, suspenda la operación
y asegure este producto para que no siga funcionando.
¡Evite lastimarse y evite dañar el producto! No avance más allá de cualquier símbolo
hasta comprender completamente las condiciones indicadas!
Power
•Importante! Este es un producto de Clase I. Tiene que estar conectado a tierra.
• Este producto se conecta a un enchufe. El enchufe necesita estar cerca del producto y ser
fácilmente accesible.
• Conecte este producto únicamente a la fuente de suministro eléctrico indicada en el panel
posterior del producto.
• Si el producto no tiene interruptor para la linea principal, utilice el cordón toma de
corriente para este propósito.
Cubierta
• No permita que la humedad penetre en este producto.
• No abra la cubierta del producto a menos que se indique lo contrario.
• No introduzca objetos a través de las aberturas de la cubierta del producto.
Cables
• Siempre desconectar todos los cables eléctricos antes de revisar o reparar el producto.
• Tire siempre del enchufe o del conector para desconectar un cable. Nunca tire del cable
mismo.
• No camine ni aplique presión sobre los cables o enchufes..
Revisión y reparación de fábrica
Solo personal aprobado por la fábrica puede darle servicio al producto.
Encontrará este símbolo en el impreso que acompaña a este producto. Este símbolo
indica instrucciones importantes de funcionamiento o mantenimiento.
Es posible que este símbolo esté pegado al producto. Este símbolo indica un terminal
vivo, la flecha apunta hacia el aparato terminal
Podría encontrar este símbolo pegado al producto. Este símbolo indica un terminal
de protección de tierra.
Podría encontrar este símbolo pegado al producto. Este símbolo indica calor
excesivo o peligroso.

x D9054 HDTV Encoder Installation and Operation Guide 4038938 Rev A
Precauzioni di sicurezza
Proteggetevi da scosse elettriche e proteggete il vostro sistema da possibili danni!
• Questo prodotto soddisfa le norme internazionali per la sicurezza ed il design. Seguite
tutte le procedure di sicurezza contenute in questa guida e i simboli di sicurezza applicati
al prodotto.
• Se circostanze avverse compromettono la sicurezza d'uso di questo prodotto,
interrompetene l'uso e assicuratevi che il prodotto non venga più utilizzato.
Evitare infortuni alla persona e danni al prodotto! Non procedere oltre a qualunque
simbolo fino a quando non si siano comprese pienamente le condizioni indicate!
Alimentazione
•Importante! Questo prodotto è di Classe I. Va messo a terra.
• Questo prodotto si inserisce in una presa di corrente. La presa di corrente deve essere in
prossimità del prodotto, e deve essere facilmente accessibile.
• Collegare questo prodotto solamente alla fonte di alimentazione indicata sul pannello
posteriore di questo prodotto.
• Se questo prodotto non è dotato di un interruttore principale, il cavo di alimentazione
funge a questo scopo.
Chiusura
• Proteggete da umidità questo prodotto.
• Non aprire la chiusura di questo prodotto a meno che non sia specificato diversamente.
Non inserire oggetti attraverso le fessure della chiusura.
Cavi
• Staccare sempre tutti i cavi di alimentazione prima di svolgere l'assistenza tecnica al
prodotto.
• Per scollegare un cavo tirate la spina o il connettore, non tirare mai il cavo stesso.
• Non calpestare o sottoporre a sollecitazioni i cavi o le prese.
Riparazionoi di fabbrica
• Per le riparazioni contattate solamente personale tecnico autoizzato dalla fabbrica.
Questo simbolo, che appare nella letteratura di accompagnamento del prodotto,
indica importanti istruzioni d'uso e di manutenzione.
Sul prodotto potete vedere questo simbolo che indica un dispositivo terminale sotto
tensione; la freccia punta verso il dispositivo.
Potrete trovare il presente simbolo applicato a questo prodotto. Questo simbolo
indica un terminale protettivo di messa a terra.
Potrete trovare il presente simbolo attaccato a questo prodotto. Questo simbolo
indica un calore eccessivo o pericoloso.

4038938 Rev A D9054 HDTV Encoder Installation and Operation Guide xi
Important Safety Instructions
Read and Retain Instructions
Carefully read all safety and operating instructions before operating this equipment, and
retain them for future reference.
Follow Instructions and Heed Warnings
Follow all operating and use instructions. Pay attention to all warnings and cautions in the
operating instructions, as well as those that are affixed to this equipment.
Terminology
The terms defined below are used in this document. The definitions given are based on
those found in safety standards.
Service Personnel - The term service personnel applies to trained and qualified individuals
who are allowed to install, replace, or service electrical equipment. The service personnel
are expected to use their experience and technical skills to avoid possible injury to
themselves and others due to hazards that exist in service and restricted access areas.
User and Operator - The terms user and operator apply to persons other than service
personnel.
Ground(ing) and Earth(ing) - The terms ground(ing) and earth(ing) are synonymous. This
document uses ground(ing) for clarity, but it can be interpreted as having the same meaning
as earth(ing).
Electric Shock Hazard
This equipment meets applicable safety standards.
Electric shock can cause personal injury or even death. Avoid direct contact with dangerous
voltages at all times. The protective ground connection is essential to safe operation and
must be verified before connecting the power supply.
Know the following safety warnings and guidelines:
• Dangerous Voltages
- Only qualified service personnel are allowed to perform equipment installation or
replacement.
- Only qualified service personnel are allowed to remove chassis covers and access any
of the components inside the chassis.
• Grounding
- Do not violate the protective grounding by using an extension cable, power cable, or
autotransformer without a protective ground conductor.
- Take care to maintain the protective grounding of this equipment during service or
repair and to re-establish the protective grounding before putting this equipment back
into operation.
WARNING:
To reduce risk of electric shock, perform only the instructions that are included in the
operating instructions. Refer all servicing to qualified service personnel only.

xii D9054 HDTV Encoder Installation and Operation Guide 4038938 Rev A
Important Safety Instructions, Continued
Installation Site
When selecting the installation site, comply with the following:
•Protective Ground - The protective ground lead of the building's electrical installation
should comply with national and local requirements.
•Environmental Condition - The installation site should be dry, clean, and ventilated. Do
not use this equipment where it could be at risk of contact with water. Ensure that this
equipment is operated in an environment that meets the requirements as stated in this
equipment's technical specifications, which may be found on this equipment's data sheet.
Installation Requirements
Equipment Placement
To protect against equipment damage or injury to personnel, comply with the following:
• Install this equipment in a restricted access location.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other
equipment (including amplifiers) that produce heat.
• Place this equipment close enough to a mains AC outlet to accommodate the length of
this equipment's power cord.
• Route all power cords so that people cannot walk on, place objects on, or lean objects
against them. This may pinch or damage the power cords. Pay particular attention to
power cords at plugs, outlets, and the points where the power cords exit this equipment.
• Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with this equipment.
• Make sure the mounting surface or rack is stable and can support the size and weight of
this equipment.
• The mounting surface or rack should be appropriately anchored according to
manufacturer's specifications. Ensure this equipment is securely fastened to the mounting
surface or rack where necessary to protect against damage due to any disturbance and
subsequent fall.
Ventilation
This equipment has openings for ventilation to protect it from overheating. To ensure
equipment reliability and safe operation, do not block or cover any of the ventilation
openings. Install the equipment in accordance with the manufacturer's instructions.
WARNING:
Allow only qualified service personnel to install this equipment.
The installation must conform to all local codes and regulations.
WARNING:
Avoid personal injury and damage to this equipment. An unstable mounting surface
may cause this equipment to fall.

4038938 Rev A D9054 HDTV Encoder Installation and Operation Guide xiii
Important Safety Instructions, Continued
Rack Mounting Safety Precautions
Mechanical Loading
Make sure that the rack is placed on a stable surface. If the rack has stabilizing devices,
install these stabilizing devices before mounting any equipment in the rack.
Reduced Airflow
When mounting this equipment in the rack, do not obstruct the cooling airflow through the
rack. Be sure to mount the blanking plates to cover unused rack space. Additional
components such as combiners and net strips should be mounted at the back of the rack, so
that the free airflow is not restricted.
Elevated Operating Ambient Temperature
Only install this equipment in a humidity- and temperature-controlled environment that
meets the requirements given in this equipment's technical specifications.
Handling Precautions
When moving a cart that contains this equipment, check for any of the following possible
hazards:
• Use caution when moving this equipment/cart combination to avoid injury from tip-
over.
• If the cart does not move easily, this condition may indicate obstructions or cables that
may need to be disconnected before moving this equipment to another location.
• Avoid quick stops and starts when moving the cart.
• Check for uneven floor surfaces such as cracks or cables and cords.
WARNING:
Avoid personal injury and damage to this equipment. Mounting this equipment in the
rack should be such that a hazardous condition is not caused due to uneven mechanical
loading.
CAUTION:
Installation of this equipment in a rack should be such that the amount of airflow
required for safe operation of this equipment is not compromised.
CAUTION:
If installed in a closed or multi-unit rack assembly, the operating ambient temperature
of the rack environment may be greater than room ambient temperature. Therefore,
install this equipment in an environment compatible with the manufacturer's
maximum rated ambient temperature.
WARNING:
Avoid personal injury and damage to this equipment! Move any
equipment and cart combination with care. Quick stops, excessive force,
and uneven surfaces may cause this equipment and cart to overturn.

xiv D9054 HDTV Encoder Installation and Operation Guide 4038938 Rev A
Important Safety Instructions, Continued
Grounding
This section provides instructions for verifying that the equipment is properly grounded.
Safety Plugs (USA Only)
Equipment protection Class I - Cisco supplies a mains cord with a 3-terminal (grounding-
type) safety plug. Do not defeat the safety purpose of the grounding-type or polarized
safety plug.
To properly ground this equipment, follow these safety guidelines:
•Grounding-Type Plug - For a 3-terminal plug (one terminal on this plug is a protective
grounding pin), insert the plug into a grounded mains, 3-terminal outlet.
Note: This plug fits only one way. If this plug cannot be fully inserted into the outlet,
contact an electrician to replace the obsolete 3-terminal outlet.
Safety Plugs (European Union)
•Class I Mains Powered Equipment - Provided with a 3-terminal AC inlet and requires
connection to a 3-terminal mains supply outlet via a 3-terminal power cord for proper
connection to the protective ground.
Note: The equipotential bonding terminal provided on some equipment is not designed
to function as a protective ground connection.
Equipotential Bonding
If this equipment is equipped with an external chassis terminal marked with the IEC 60417-
5020 chassis icon ( ), or 5017 ( ), the installer should refer to CENELEC standard EN
50083-1 or IEC standard IEC 60728-11 for correct equipotential bonding connection
instructions.

4038938 Rev A D9054 HDTV Encoder Installation and Operation Guide xv
Important Safety Instructions, Continued
AC Power
Important: This equipment is Class I equipment, it must be grounded.
• If this equipment plugs into an outlet, the outlet must be near this equipment, and must
be easily accessible.
• Connect this equipment only to the power sources that are identified on the equipment-
rating label normally located close to the power inlet connector(s).
• If this equipment has two power sources be sure to disconnect all power sources before
working on this equipment.
• If this equipment does not have a main power switch, the power cord connector serves as
the disconnect device.
• Always pull on the plug or the connector to disconnect a cable. Never pull on the cable
itself.
• Unplug this equipment when unused for long periods of time.
Circuit Overload
Know the effects of circuit overloading before connecting this equipment to the power
supply.
General Servicing Precautions
Be aware of the following general precautions and guidelines:
•Servicing - Refer all servicing to qualified service personnel. Servicing is required when
this equipment has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into this equipment, this
equipment has been exposed to rain or moisture, does not operate normally, or has been
dropped.
•Wristwatch and Jewelry - For personal safety and to avoid damage of this equipment
during service and repair, do not wear electrically conducting objects such as a
wristwatch or jewelry.
•Lightning - Do not work on this equipment, or connect or disconnect cables, during
periods of lightning.
•Labels - Do not remove any warning labels. Replace damaged or illegible warning labels
with new ones.
•Covers - Do not open the cover of this equipment and attempt service unless instructed to
do so in the instructions. Refer all servicing to qualified service personnel only.
•Moisture - Do not allow moisture to enter this equipment.
•Cleaning - Use a damp cloth for cleaning.
CAUTION:
Consider the connection of this equipment to the supply circuit and the effect that
overloading of circuits might have on overcurrent protection and supply wiring. Refer
to the information on the equipment-rating label when addressing this concern.
WARNING:
Avoid electric shock! Opening or removing this equipment's cover may expose you to
dangerous voltages.

xvi D9054 HDTV Encoder Installation and Operation Guide 4038938 Rev A
Important Safety Instructions, Continued
Safety Checks - After service, assemble this equipment and perform safety checks
to ensure it is safe to use before putting it back into operation.
Accessories
Use only attachments or accessories specified by the manufacturer.

4038938 Rev A D9054 HDTV Encoder Installation and Operation Guide xvii
Contents
Safety Precautions.......................................................................................................................................v
Règles de sécurité......................................................................................................................................vii
Sicherheitsvorkehrungen........................................................................................................................ viii
Precauciones de seguridad........................................................................................................................ix
Precauzioni di sicurezza.............................................................................................................................. x
Important Safety Instructions.....................................................................................................................xi
About This Manual................................................................................................................................. xxiii
Chapter 1 Quick Setup - Read Me First!
Connecting the Units........................................................................................................1-1
Front Panel Setup..............................................................................................................1-3
Chapter 2 Introduction
D9054 HD Encoder ...........................................................................................................2-2
Application Examples ......................................................................................................2-5
Video Interfaces.................................................................................................................2-6
Audio and Data Interfaces...............................................................................................2-7
Transport Stream Outputs...............................................................................................2-9
Control and Management Interfaces............................................................................2-10
Chapter 3 Installation
Section A - Rack Installation .................................................................................................3-2
General................................................................................................................................3-2
Installing the D9054 HD Encoder ...................................................................................3-3
Section B - Connector Panel .................................................................................................3-5
Overview............................................................................................................................3-5
Section C - Connecting the Input/Output Signals ..................................................................3-7
Connecting the Video Inputs...........................................................................................3-7
Connecting the Audio Inputs..........................................................................................3-8
Connecting to the Contact Closure Interface ................................................................3-9
Connecting an External Alarm System........................................................................3-10
Connecting the Ethernet Management Interface........................................................3-11
Connecting the IP TS Outputs.......................................................................................3-12
Connecting the ASI Outputs and the ASI Monitor....................................................3-13

xviii D9054 HDTV Encoder Installation and Operation Guide 4038938 Rev A
Contents, Continued
Chapter 4 Front Panel Operation
About the Front Panel ......................................................................................................4-2
Keypad Convention..........................................................................................................4-4
Startup Screen....................................................................................................................4-5
Main Menu.........................................................................................................................4-6
PSI Menu ............................................................................................................................4-7
Video Menu .......................................................................................................................4-9
Audio Menu.....................................................................................................................4-13
Output Menu ...................................................................................................................4-22
System Menu ...................................................................................................................4-24
Chapter 5 Setup and Monitoring
Logging On to the Web Interface....................................................................................5-6
Changing the Password for the Web Interface.............................................................5-7
Web Interface - Summary Screen....................................................................................5-8
Tab Pages............................................................................................................................5-9
The Menu Bar and Buttons............................................................................................5-10
Context-Sensitive Online Help......................................................................................5-11
Section A - Setting Up Video...............................................................................................5-12
Setting Up the Video Input............................................................................................5-12
Setting Up the H.264 Video Encoder............................................................................5-13
3:2 Pulldown and 3:2 Pulldown Inversion ..................................................................5-16
Setting Up the H.264 Video Encoding Rate ................................................................5-18
Setting Up the H.264 Video Encoding Parameters ....................................................5-20
Setting Up the H.264 Video Encoder Delays ..............................................................5-21
Setting Up the H.264 Aspect Ratio ...............................................................................5-22
Setting Up Statistical Multiplexing...............................................................................5-25
Setting Up the Statistical Multiplexing Encoding Rate .............................................5-26
Determining the Default Video Rate............................................................................5-29
Setting Up the Statistical Multiplexing Pools .............................................................5-30
Setting Up the Statistical Multiplexing Clock.............................................................5-31
Setting Up Statistical Multiplexing Quality of Service..............................................5-32
Setting Up the Statistical Multiplexing Redundancy.................................................5-34
Monitoring Statistical Multiplexing .............................................................................5-35
Setting Up the H.264 PIP Video Channel ....................................................................5-39
Setting Up the H.264 PIP Video Encoding Parameters .............................................5-40
Setting Up the Test Pattern............................................................................................5-41

4038938 Rev A D9054 HDTV Encoder Installation and Operation Guide xix
Contents, Continued
Section B - Setting Up the Pre-processor............................................................................5-42
Setting Up the Pre-processor Parameters....................................................................5-42
Setting Up the Pre-processor, Custom Filtering.........................................................5-43
Section C - Setting Up the Audio.........................................................................................5-44
Setting Up the Layer II Audio Input ............................................................................5-45
Setting Up the Layer II Channel Information .............................................................5-50
Setting Up the Layer II Test Tones ...............................................................................5-51
Setting Up the Dolby Digital Audio Input ..................................................................5-53
Setting Up Dolby Digital Processing............................................................................5-59
Setting Up the Dolby Digital Channels........................................................................5-62
Setting up the Dolby Digital Extended BSI .................................................................5-64
Setting Up Dolby Digital Passthrough.........................................................................5-65
Setting Up Dolby Digital Test Tones............................................................................5-66
Setting Up the AAC Audio Input.................................................................................5-68
Setting Up AAC Processing...........................................................................................5-74
Setting Up AAC Passthrough .......................................................................................5-77
Setting Up the AAC Test Tones ....................................................................................5-78
Setting Up the Linear/Dolby E Audio Input..............................................................5-80
Setting Up the Linear/Dolby E Processing.................................................................5-82
Setting Up the Linear Parameters.................................................................................5-83
Setting Up the Reference Output (MCA card only)...................................................5-84
Setting up the Dolby-E Decoder (MCA card only) ....................................................5-85
Section D - Setting Up the VBI.............................................................................................5-86
Testing and Enabling Closed Captions........................................................................5-86
Section E - Digital Program Insertion (DPI).........................................................................5-87
Setting Up the DPI ..........................................................................................................5-87
Section F - Setting Up the TS Output...................................................................................5-96
Setting Up the TS Output Parameters..........................................................................5-96
Setting Up the ASI Output Parameters........................................................................5-97
Setting Up the IP Streaming Output ............................................................................5-98
Section G - Setting Up the PSI...........................................................................................5-103
Enabling/Disabling the PSI/SI Information.............................................................5-103
Setting Up the Transport Stream ................................................................................5-104
Setting Up the Service Stream.....................................................................................5-105
Setting Up the Video Program....................................................................................5-106
Setting Up the Layer II Audio Program ....................................................................5-107
Selecting the Dolby Digital Audio Descriptor Mode...............................................5-109

xx D9054 HDTV Encoder Installation and Operation Guide 4038938 Rev A
Contents, Continued
Setting Up the Dolby Digital Audio Program ..........................................................5-110
Setting Up the AAC Audio Program .........................................................................5-112
Setting Up the Linear Audio Program.......................................................................5-114
Setting Up the NIT........................................................................................................5-116
Setting Up the Cable NIT.............................................................................................5-117
Setting Up the Satellite NIT.........................................................................................5-118
Setting Up the Terrestrial NIT.....................................................................................5-119
Section H - Working with the System ................................................................................5-120
Reading the System Information or Managing the System....................................5-120
Reading the D9054 HD Encoder Temperatures .......................................................5-122
Reading the Message Status ........................................................................................5-123
Setting Up the Message Parameters...........................................................................5-124
Viewing Messages.........................................................................................................5-126
Viewing the Message Log............................................................................................5-127
Setting Up the Trap Destinations................................................................................5-128
Removing a Trap Destination .....................................................................................5-130
Reading the Module Information ...............................................................................5-131
Setting the Date and Time Manually .........................................................................5-132
Setting the Clock Synchronization .............................................................................5-133
Installing and Enabling Software Options ................................................................5-135
Setting Up the IP Network ..........................................................................................5-137
Chapter 6 Service and Maintenance
Section A - Firmware Upload.................................................................................................6-2
Uploading Firmware to the D9054 HD Encoder using the Web Interface...............6-2
Section B - Front Panel LEDs................................................................................................6-3
Introduction .......................................................................................................................6-3
Messages.............................................................................................................................6-4
Section C - Power Supply Replacement ..............................................................................6-24
Introduction .....................................................................................................................6-24
Section D - Filter and Fan Replacement...............................................................................6-25
Introduction .....................................................................................................................6-25
Chapter 7 Customer Information
Product Support................................................................................................................7-2
Returning Products...........................................................................................................7-4