Cisco 2811 - Voice Security Bundle Router Installation instructions

Corporate Headquarters:
Copyright © 2004 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco 2800 Series Hardware Documents:
Introduction and Warnings
This introduction discusses the objectives, audience, organization, and conventions of these hardware
documents, and points to related documents that have information beyond the scope of these documents.
This preface contains the following sections:
•Objectives, page 1
•Audience, page 2
•Topics Covered by Hardware Documents, page 2
•Conventions, page 3
•Safety Warnings, page 4
•Related Documentation, page 9
•Cisco 90-Day Limited Hardware Warranty Terms, page 10
•Obtaining Documentation, page 11
•Documentation Feedback, page 12
•Obtaining Technical Assistance, page 12
•Obtaining Additional Publications and Information, page 14
Objectives
These hardware documents provide you with comprehensive hardware-related information about
Cisco 2800 series integrated services routers, including platform descriptions, safety information, site
preparation, chassis installation and interconnection, power up, initial configuration, troubleshooting,
interface card and module installation, and procedures for maintenance and upgrades.
These documents provide enough initial software configuration information to establish network
communication. For detailed software configuration information, refer to the Cisco 2800 series software
configuration documents and to the Cisco IOS configuration guides and command reference
publications. These publications are available online. See the “Obtaining Documentation” section on
page 11 for more information.

2
Cisco 2800 Series Hardware Documents: Introduction and Warnings
OL-5808-01
Audience
These documents describe several router platforms that are similar in functionality, but differ in the
number of interfaces supported. Some information provided may not apply to your particular router
model.
To access warranty, service, and support information, see the “Cisco 90-Day Limited Hardware Warranty
Terms” section on page 10.
Audience
This documentation is designed for the person installing, configuring, and maintaining the router, who
should be familiar with electronic circuitry and wiring practices and has experience as an electronic or
electromechanical technician. It identifies certain procedures that should be performed only by trained
and qualified personnel.
Topics Covered by Hardware Documents
Table 1 lists the topics covered by these hardware documents.
Table 1 Hardware Documentation for Cisco 2800 Series Routers
Topic Description
This document. Describes the features and warnings of
Cisco 2800 series routers.
Overview of Cisco 2800 Series Routers Describes the features and specifications of Cisco 2800
series routers.
Preinstallation Requirements and
Planning for Cisco 2800 Series Routers
Describes safety recommendations, site requirements, and
required tools and equipment, and includes an installation
checklist.
Port and Cable Information for
Cisco 2800 Series Routers
Provides information about cables needed to install your
Cisco 2800 series router.
Chassis Installation Procedures for
Cisco 2800 Series Routers
Describes how to install your Cisco 2800 series router on a
desktop, in a rack, or on a wall.
Cable Connection Procedures for
Cisco 2800 Series Routers
Describes how to connect your Cisco 2800 series router to
a power source and to networks and external devices.
Power Up and Initial Configuration
Procedures for Cisco 2800 Series Routers
Describes how to power up your Cisco 2800 series router
and perform an initial configuration to provide network
access.
Troubleshooting Cisco 2800 Series
Routers
Describes how to isolate problems, read LEDs, and
interpret error and recovery messages.
Installing Network Modules in
Cisco 2800 Series Routers
Contains links to the procedures for installing network
modules in external chassis slots.
Installing Interface Cards in Cisco 2800
Series Routers
Contains links to the procedures for installing the various
types of interface card in external chassis slots.

3
Cisco 2800 Series Hardware Documents: Introduction and Warnings
OL-5808-01
Conventions
Conventions
These documents use the conventions listed in Table 2 to convey instructions and information:
Note Means reader take note. Notes contain helpful suggestions or references to material not covered in the
manual.
Timesaver Means the described action saves time. You can save time by performing the action described in the
paragraph.
Tip Means the following information will help you solve a problem. The tips information might not be
troubleshooting or even an action, but could be useful information, similar to a Timesaver.
Caution Means reader be careful. In this situation, you might do something that could result in equipment
damage or loss of data.
Installing and Upgrading Internal
Modules in Cisco 2800 Series Routers
Describes how to install or upgrade modules that are
located internally within the router, such as memory
modules, AIMs, PVDMs, and power supplies.
Removing and Installing CompactFlash
Memory Cards in Cisco 2800 Series
Routers
Describes hardware installation procedures that do not
require opening the chassis.
Table 1 Hardware Documentation for Cisco 2800 Series Routers (Continued)
Topic Description
Table 2 Document Conventions
Convention Description
boldface font Commands and keywords.
italic font Variables for which you supply values.
[ ] Optional keywords or arguments appear in square brackets.
{x| y| z} A choice of required keywords appears in braces separated by vertical bars. You must select one.
screen font Examples of information displayed on the screen.
boldface screen
font
Examples of information you must enter.
< > Nonprinting characters, for example passwords, appear in angle brackets in contexts where italics are
not available.
[ ] Default responses to system prompts appear in square brackets.

4
Cisco 2800 Series Hardware Documents: Introduction and Warnings
OL-5808-01
Safety Warnings
Safety Warnings
Safety warnings appear throughout these publications in procedures that, if performed incorrectly, may
harm you. A warning symbol precedes each warning statement. To see translations of the warnings that
appear in these publications, refer to the Cisco 2800 Series Routers Regulatory Compliance and Safety
Information document that accompanied your router.
Warning Definition
Warning IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. To see translations of the warnings that appear in
this publication, refer to the translated safety warnings that accompanied this device.
Statement 1071
SAVE THESE INSTRUCTIONS
Waarschuwing
BELANGRIJKE VEILIGHEIDSINSTRUCTIES
Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan
veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij
elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van de standaard
praktijken om ongelukken te voorkomen. Voor een vertaling van de waarschuwingen die in deze
publicatie verschijnen, dient u de vertaalde veiligheidswaarschuwingen te raadplegen die bij dit
apparaat worden geleverd.
Opmerking BEWAAR DEZE INSTRUCTIES.
Varoitus
TÄRKEITÄ TURVALLISUUTEEN LIITTYVIÄ OHJEITA
Tämä varoitusmerkki merkitsee vaaraa. Olet tilanteessa, joka voi johtaa ruumiinvammaan. Ennen
kuin työskentelet minkään laitteiston parissa, ota selvää sähkökytkentöihin liittyvistä vaaroista ja
tavanomaisista onnettomuuksien ehkäisykeinoista. Tässä asiakirjassa esitettyjen varoitusten
käännökset löydät laitteen mukana toimitetuista ohjeista.
Huomautus SÄILYTÄ NÄMÄ OHJEET
Attention
IMPORTANTES INFORMATIONS DE SÉCURITÉ
Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant causer
des blessures ou des dommages corporels. Avant de travailler sur un équipement, soyez conscient
des dangers posés par les circuits électriques et familiarisez-vous avec les procédures couramment
utilisées pour éviter les accidents. Pour prendre connaissance des traductions d'avertissements
figurant dans cette publication, consultez les consignes de sécurité traduites qui accompagnent cet
appareil.
Remarque CONSERVEZ CES INFORMATIONS

5
Cisco 2800 Series Hardware Documents: Introduction and Warnings
OL-5808-01
Safety Warnings
Warnung
WICHTIGE SICHERHEITSANWEISUNGEN
Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu einer
Körperverletzung führen könnte. Bevor Sie mit der Arbeit an irgendeinem Gerät beginnen, seien Sie
sich der mit elektrischen Stromkreisen verbundenen Gefahren und der Standardpraktiken zur
Vermeidung von Unfällen bewusst. Übersetzungen der in dieser Veröffentlichung enthaltenen
Warnhinweise sind im Lieferumfang des Geräts enthalten.
Hinweis BEWAHREN SIE DIESE SICHERHEITSANWEISUNGEN AUF
Avvertenza
IMPORTANTI ISTRUZIONI SULLA SICUREZZA
Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle
persone. Prima di intervenire su qualsiasi apparecchiatura, occorre essere al corrente dei pericoli
relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti. Per le
traduzioni delle avvertenze riportate in questo documento, vedere le avvertenze di sicurezza che
accompagnano questo dispositivo.
Nota CONSERVARE QUESTE ISTRUZIONI
Advarsel
VIKTIGE SIKKERHETSINSTRUKSJONER
Dette varselssymbolet betyr fare. Du befinner deg i en situasjon som kan forårsake personskade. Før
du utfører arbeid med utstyret, bør du være oppmerksom på farene som er forbundet med elektriske
kretssystemer, og du bør være kjent med vanlig praksis for å unngå ulykker. For å se oversettelser
av advarslene i denne publikasjonen, se de oversatte sikkerhetsvarslene som følger med denne
enheten.
Merk TA VARE PÅ DISSE INSTRUKSJONENE
Aviso
INSTRUÇÕES IMPORTANTES DE SEGURANÇA
Este símbolo de aviso significa perigo. O utilizador encontra-se numa situação que poderá ser
causadora de lesões corporais. Antes de iniciar a utilização de qualquer equipamento, tenha em
atenção os perigos envolvidos no manuseamento de circuitos eléctricos e familiarize-se com as
práticas habituais de prevenção de acidentes. Para ver traduções dos avisos incluídos nesta
publicação, consulte os avisos de segurança traduzidos que acompanham este dispositivo.
Nota GUARDE ESTAS INSTRUÇÕES
¡Advertencia!
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de manipular
cualquier equipo, considere los riesgos de la corriente eléctrica y familiarícese con los
procedimientos estándar de prevención de accidentes. Vea las traducciones de las advertencias
que acompañan a este dispositivo.
Nota GUARDE ESTAS INSTRUCCIONES

6
Cisco 2800 Series Hardware Documents: Introduction and Warnings
OL-5808-01
Safety Warnings
Varning!
VIKTIGA SÄKERHETSANVISNINGAR
Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada.
Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och
känna till vanliga förfaranden för att förebygga olyckor. Se översättningarna av de
varningsmeddelanden som finns i denna publikation, och se de översatta säkerhetsvarningarna som
medföljer denna anordning.
OBS! SPARA DESSA ANVISNINGAR

7
Cisco 2800 Series Hardware Documents: Introduction and Warnings
OL-5808-01
Safety Warnings
Aviso
INSTRUÇÕES IMPORTANTES DE SEGURANÇA
Este símbolo de aviso significa perigo. Você se encontra em uma situação em que há risco de lesões
corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos riscos que envolvem os
circuitos elétricos e familiarize-se com as práticas padrão de prevenção de acidentes. Use o
número da declaração fornecido ao final de cada aviso para localizar sua tradução nos avisos de
segurança traduzidos que acompanham o dispositivo.
GUARDE ESTAS INSTRUÇÕES
Advarsel
VIGTIGE SIKKERHEDSANVISNINGER
Dette advarselssymbol betyder fare. Du befinder dig i en situation med risiko for
legemesbeskadigelse. Før du begynder arbejde på udstyr, skal du være opmærksom på de
involverede risici, der er ved elektriske kredsløb, og du skal sætte dig ind i standardprocedurer til
undgåelse af ulykker. Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen i de
oversatte advarsler, der fulgte med denne enhed.
GEM DISSE ANVISNINGER

8
Cisco 2800 Series Hardware Documents: Introduction and Warnings
OL-5808-01
Safety Warnings

9
Cisco 2800 Series Hardware Documents: Introduction and Warnings
OL-5808-01
Related Documentation
Related Documentation
The Cisco IOS software running your Cisco 2800 series router includes extensive features and
functionality. For information that is beyond the scope of these documents, or for additional information,
use the following resources:
Timesaver Make sure that you have access to the documents listed in Table 3. Some of these documents are
available in print, and all are on the World Wide Web. If you need to order printed documents, see the
“Obtaining Documentation” section on page 11.

10
Cisco 2800 Series Hardware Documents: Introduction and Warnings
OL-5808-01
Cisco 90-Day Limited Hardware Warranty Terms
Cisco 90-Day Limited Hardware Warranty Terms
There are special terms applicable to your hardware warranty and various services that you can use
during the warranty period. Your formal Warranty Statement, including the warranties and license
agreements applicable to Cisco software, is available on Cisco.com. Follow these steps to access and
download the Cisco Information Packet and your warranty and license agreements from Cisco.com.
1. Launch your browser, and go to this URL:
http://www.cisco.com/univercd/cc/td/doc/es_inpck/cetrans.htm
The Warranties and License Agreements page appears.
2. To read the Cisco Information Packet, follow these steps:
a. Click the Information Packet Number field, and make sure that the part number
78-5235-03A0 is highlighted.
b. Select the language in which you would like to read the document.
c. Click Go.
The Cisco Limited Warranty and Software License page from the Information Packet appears.
d. Read the document online, or click the PDF icon to download and print the document in Adobe
Portable Document Format (PDF).
Table 3 Related and Referenced Documents
Cisco Product Document Title
Cisco 2800 series routers Cisco 2800 Series Routers Quick Start Guide
Software configuration documentation for Cisco 2800 series routers
Cisco 2800 Series and Cisco 3800 Series Routers Regulatory Compliance
and Safety Information
Cisco 2800 Series Cards and Modules
Cisco Modular Access Router Cable Specifications
Cisco RPS-675 Redundant Power System Hardware Installation Guide
Quick Start Guide: Network Modules for Cisco 2600 Series, Cisco 2800
Series, Cisco 3600 Series, Cisco 3700 Series Routers, and Cisco 3800
Series Routers
Cisco Network Modules Hardware Installation Guide
Quick Start Guide: Interface Cards for Cisco 1600, 1700, 1800, 2600,
2800, 3600, 3700, and 3800 Series Routers
Cisco Interface Cards Installation Guide
Network management
system
Network management software documentation
Cisco IOS software Cisco IOS software documentation, all releases. Refer to the
documentation for the Cisco IOS software release installed on your
router.