Cisco A9K-SIP-700 Manual

Cisco ASR 9000 Series Aggregation Services Router SIP and SPA
Hardware Installation Guide
First Published: 2013-08-15
Last Modified: 2018-03-23
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: [phone]
800 553-NETS (6387)
Fax: [phone]

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS,
INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH
THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY,
CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.
The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB's public domain version of
the UNIX operating system. All rights reserved. Copyright ©1981, Regents of the University of California.
NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS" WITH ALL FAULTS.
CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.
IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT
LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS
HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network
topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional
and coincidental.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com
go trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any
other company. (1721R)
©2016, 2018 Cisco Systems, Inc. All rights reserved.

CONTENTS
Preface ix
PREFACE
Changes to This Document ix
Objectives xi
Organization xii
Related Documentation xii
Obtaining Documentation and Submitting a Service Request xiii
Overview: Cisco ASR 9000 Series Router SPA Interface Processors 1
CHAPTER 1
SIP and SPA Compatibility 1
Router Hardware Installation 2
Supported Platforms 2
SIP Summary 2
SIP Software and Hardware Compatibility 3
Cisco ASR 9000 SIP-700 Overview 4
Cisco ASR 9000 SIP-700 Board Components 4
Cisco ASR 9000 SIP-700 LED 4
Cisco ASR 9000 SIP-700 Physical Specifications 5
SPA Subslot Numbering on the Cisco ASR 9000 SIP-700 5
SPA Interface Addresses on the Cisco ASR 9000 SIP-700 6
Overview: Cisco ASR 9000 Series Router Shared Port Adapters 9
CHAPTER 2
SPA Summary 9
Checking Hardware and Software Compatibility 11
2-Port Channelized OC-12/DS0 SPA Overview 12
2-Port Channelized OC-12/DS0 SPA LEDs 12
2-Port Channelized OC-12/DS0 SPA Interface Specifications 13
Cisco ASR 9000 Series Aggregation Services Router SIP and SPA Hardware Installation Guide
iii

2-Port Channelized OC-12/DS0 SPA SFP Optical Transceiver Modules and Cables 13
1-Port Channelized STM-16/OC-48 SPA Overview 14
1-Port Channelized STM-16/OC-48 SPA LEDs 14
1-Port Channelized STM-16/OC-48 SPA Interface Specifications 15
1-Port Channelized STM-16/OC-48 SPA Cables and Connectors 16
1-Port OC-48 POS RPR SPA Overview 17
1-Port OC48-POS/RPR SPA LEDs 17
1-Port OC48-POS/RPR SPA Interface Specifications 19
1-Port OC48-POS/RPR SPA Cables, Optical Transceiver Modules, and Connectors 19
2-Port OC-48 POS RPR SPA Overview 19
2-Port OC48-POS/RPR SPA LEDs 19
2-Port OC48-POS/RPR SPA Interface Specifications 21
2-Port OC48-POS/RPR SPA Cables, Optical Transceiver Modules, and Connectors 21
8-Port OC-12 STM-4 POS SPA Overview 22
8-Port OC12/STM4 SPA LEDs 22
8-Port OC12/STM4 SPA Interface Specifications 23
8-Port OC12/STM4 SPA Optical Transceiver Modules and Cables 23
OC-12 Module Connections 24
1-Port OC-192 STM-64 POS RPR XFP SPA Overview 25
1-Port OC-192/STM-64 POS/RPR XFP SPA LEDs 25
1-Port OC-192/STM-64 POS/RPR XFP SPA Interface Specifications 27
1-Port OC-192/STM-64 POS/RPR XFP SPA Optical Transceiver Modules, Connectors, and Cables
27
OC-192 Module Connections 28
Mate Interface Cables 28
2-Port and 4-Port Clear Channel T3/E3 SPA Overview 29
2-Port and 4-Port Clear Channel T3/E3 SPA LEDs 29
2-Port and 4-Port Clear Channel T3/E3 SPA Interface Specifications 30
2-Port and 4-Port Clear Channel T3/E3 SPA Cables and Connectors 31
4-Port Channelized T3 to DS0 Overview 31
4-Port Channelized T3 to DS0 LEDs 31
4-Port Channelized T3 to DS0 Interface Specifications 32
4-Port Channelized T3 to DS0 Cables and Connectors 33
8-Port Channelized T1/E1 SPA Overview 33
Cisco ASR 9000 Series Aggregation Services Router SIP and SPA Hardware Installation Guide
iv
Contents

8-Port Channelized T1/E1 SPA LEDs 33
8-Port Channelized T1/E1 SPA Interface Specifications 34
8-Port Channelized T1/E1 SPA Cables, Connectors, and Pinouts 35
1-Port Channelized STM-1/OC-3 SPA Overview 35
1-Port Channelized STM-1/OC-3 SPA LEDs 35
1-Port Channelized STM-1/OC-3 SPA Interface Specifications 36
1-Port Channelized STM-1/OC-3 SPA Cables and Connectors 37
4-Port OC-3/STM-1 POS SPA Overview 38
4-Port OC-3/STM-1 POS SPA LEDs 38
4-Port OC-3/STM-1 POS SPA Interface Specifications 39
4-Port OC-3/STM-1 POS SPA Optical Transceiver Modules and Cables 39
OC-3 Module Connections 40
8-Port OC-3/STM-1 POS SPA Overview 41
8-Port OC-3/STM-1 POS SPA LEDs 41
8-Port OC-3/STM-1 POS SPA Interface Specifications 42
8-Port OC-3/STM-1 POS SPA Optical Transceiver Modules and Cables 43
OC-3 Module Connections 44
1-Port Channelized OC-3 ATM CEoP SPA Overview 44
1-Port Channelized OC-3 ATM CEoP SPA LEDs 44
1-Port Channelized OC-3 ATM CEoP SPA Interface Specifications 45
1-Port Channelized OC-3 ATM CEoP SPA Optical Transceiver Modules and Cables 45
1-Port and 3-Port Clear Channel OC-3 ATM SPA Overview 46
1-Port and 3-Port Clear Channel OC-3 ATM SPA LEDs 46
1-Port and 3-Port Clear Channel OC-3 ATM SPA Interface Specifications 47
1-Port and 3-Port Clear Channel OC-3 ATM SPA Cables and Connectors 47
1-Port Clear Channel OC-12 ATM SPA Overview 48
1-Port Clear Channel OC-12 ATM SPA LEDs 48
1-Port Clear Channel OC-12 ATM SPA Interface Specifications 49
1-Port Clear Channel OC-12 ATM SPA Cables and Connectors 49
2-Port OC-3 STM-1/OC-12 STM-4 POS SPA Overview 50
2-Port OC-3 STM-1/OC-12 STM-4 POS SPA LEDs 51
2-Port OC-3 STM-1/OC-12 STM-4 POS SPA Interface Specifications 51
2-Port OC-3 STM-1/OC-12 STM-4 POS SPA Optical Transceiver Modules and Cables 52
4-Port OC-3 STM-1/OC-12 STM-4 POS SPA Overview 53
Cisco ASR 9000 Series Aggregation Services Router SIP and SPA Hardware Installation Guide
v
Contents

4-Port OC-3 STM-1/OC-12 STM-4 POS SPA LEDs 54
4-Port OC-3 STM-1/OC-12 STM-4 POS SPA Interface Specifications 54
4-Port OC-3 STM-1/OC-12 STM-4 POS SPA Optical Transceiver Modules and Cables 55
4-Port OC-48/STM-16 POS/RPR SPA Overview 56
4-Port OC-48/STM-16 POS/RPR SPA LEDs 56
4-Port OC-48/STM-16 POS/RPR SPA Interface Specifications 57
4-Port OC-48/STM-16 POS/RPR SPA Cables, Optical Transceiver Modules, and Connectors 57
OC-48 Module Connections 58
Mate Interface Cables 58
2-Port Channelized T3/E3 ATM CEoP SPA Overview 59
2-Port Channelized T3/E3 ATM CEoP SPA LEDs 59
2-Port Channelized T3/E3 ATM CEoP SPA Interface Specifications 60
2-Port Channelized T3/E3 ATM CEoP SPA Cables and Connectors 60
24-Port Channelized T1/E1/J1 CEoP SPA Overview 61
24-Port Channelized T1/E1/J1 CEoP SPA LEDs 61
24-Port Channelized T1/E1/J1 CEoP SPA Interface Specifications 62
24-Port Channelized T1/E1/J1 CEoP SPA Cables and Connectors 62
Cable Installation 62
SPA Cable Pinouts 63
RJ-45 Cable Pinouts 65
Patch Panel Cabling 65
24-Port Channelized T1/E1/J1 CEoP SPA Patch Panel 65
4-Port Serial Interface SPA Overview 66
4-Port Serial Interface SPA LEDs 66
4-Port Serial Interface SPA Interface Specifications 67
4-Port Serial Interface SPA Cables, Connectors, and Pinouts 67
Preparing to Install a Shared Port Adapter or a SPA Interface Processor 83
CHAPTER 3
Safety Guidelines 83
Safety Warnings 83
Electromagnetic Compatibility Regulatory Statements 84
Electrical Equipment Guidelines 84
Telephone Wiring Guidelines 84
Laser/LED Safety 84
Cisco ASR 9000 Series Aggregation Services Router SIP and SPA Hardware Installation Guide
vi
Contents

Preventing Electrostatic Discharge 85
Required Tools and Equipment 85
Installing and Removing a SPA Interface Processor 87
CHAPTER 4
Handling SIPs 87
Removing and Installing a SIP 88
Guidelines for SIP Removal and Installation 88
Removing a SIP 89
Installing a SIP 90
Installing and Removing a Shared Port Adapter 93
CHAPTER 5
Handling SPAs 93
Online Insertion and Removal 94
SPA Installation and Removal 94
Optical Device Installation and Removal 95
Cleaning Optical Devices 95
Checking the Installation 96
Verifying the Installation 96
Using show Commands to Verify SIP and SPA Status 97
Using show Commands to Display SPA Information 97
Using the Ping Command to Verify Network Connectivity 100
Troubleshooting the Installation 101
CHAPTER 6
Troubleshooting the SIP 101
Using debug Commands 101
Packing a SIP for Shipment 102
Packing a SPA for Shipment 103
Cisco ASR 9000 Series Aggregation Services Router SIP and SPA Hardware Installation Guide
vii
Contents

Cisco ASR 9000 Series Aggregation Services Router SIP and SPA Hardware Installation Guide
viii
Contents

Preface
This preface describes the objectives and organization of this document and explains how to find additional
information on related products and services. This preface contains the following sections:
•Changes to This Document, on page ix
•Objectives, on page xi
•Organization, on page xii
•Related Documentation, on page xii
•Obtaining Documentation and Submitting a Service Request, on page xiii
Changes to This Document
This table lists the technical changes made to this document since it was first created.
Table 1: Changes to This Document
SummaryDate
Adds support for the following SPA:
• SPA-4XT-Serial
4-Port Serial Interface SPA
March 2018
Adds support for the following SPA:
• SPA-8XCHT1/E1-V2
8-Port Channelized T1/E1 SPA
March 2014
Cisco ASR 9000 Series Aggregation Services Router SIP and SPA Hardware Installation Guide
ix

SummaryDate
Adds description for the following SIP and SPAs:
• A9K-SIP-700-8G
Cisco ASR 9000 SIP-700
• SPA-2CHT3-CE-ATM
2-Port Channelized T3/E3 ATM CEoP SPA
• SPA-24CHT1-CE-ATM
24-Port Channelized T1/E1/J1 CEoP SPA
May 2013
Adds descriptions and installation instructions for the
following SPAs:
• SPA-2XSTM1/OC3/STM4/OC12
2-Port OC-3 STM-1/OC-12 STM-4 POS SPA
• SPA-4XSTM1/OC3/STM4/OC12
4-Port OC-3 STM-1/OC-12 STM-4 POS SPA
• SPA-4XOC-48/STM-16 POS/RPR
4-Port OC-48/STM-16 POS/RPR SPA
December 2012
Adds descriptions and installation instructions for the
following SPAs:
• SPA-1/3XOC3ATM
1-Port and 3-Port Clear Channel OC-3 ATM
SPA
• SPA-1XOC12ATM
1-Port Clear Channel OC-12 ATM SPA
• SPA-1xOC3-CE-ATM
1-Port Channelized OC-3 ATM CEoP SPA
December 2011
Adds descriptions and installation instructions for the
following SPAs:
• SPA-4XCT3/DS0
4-Port Channelized T3 to DS0
• SPA-8XCHT1/E1
8-Port Channelized T1/E1 SPA
April 2011
Cisco ASR 9000 Series Aggregation Services Router SIP and SPA Hardware Installation Guide
x
Preface
Preface