Cisco 6.x and 7.0 Quick start guide

INTEGRATION NOTE
Installing and Configuring Cisco Unified MeetingPlace
Click-to-Conference with IBM Lotus Sametime Instant Messaging For
Cisco Unified MeetingPlace Release 6.x and 7.0
1How to Prepare to Install Cisco Unified MeetingPlace Click-to-Conference with IBM Lotus
Sametime Instant Messaging, page 2
2How to Install Cisco Unified MeetingPlace Click-to-Conference with IBM Lotus Sametime
Instant Messaging, page 3
3Logging Information for Cisco Unified MeetingPlace Click-to-Conference with IBM Lotus
Sametime Instant Messaging, page 4

2
Revised: December 3, 2008 3:24 pm
1 How to Prepare to Install Cisco Unified MeetingPlace
Click-to-Conference with IBM Lotus Sametime Instant Messaging
End users install Cisco Unified MeetingPlace Click-to-Conference with IBM Lotus Sametime Instant Messaging using the
procedures in the Quick Start Guide for Installing and Using Cisco Unified MeetingPlace Click-to-Conference with IBM Lotus
Sametime Instant Messaging. However, the system administrator must prepare the plug-in for installation by performing the
following tasks:
•Review System Requirements, page 2
•Configuring the Update Site to Host Cisco Unified MeetingPlace Click-to-Conference with IBM Lotus Sametime Instant
Messaging on your IBM Lotus Domino Server, page 2
Review System Requirements
Before preparing to install Cisco Unified MeetingPlace Click-to-Conference with IBM Lotus Sametime Instant Messaging,
review the system requirements by reading one of the following:
•System Requirements for Cisco Unified MeetingPlace Release 6.x at
http://www.cisco.com/en/US/docs/voice_ip_comm/meetingplace/6x/requirements/60mpsysreqs.html
•System Requirements and Compatibility Matrix for Cisco Unified MeetingPlaceRelease 7.0 at
http://www.cisco.com/en/US/docs/voice_ip_comm/meetingplace/7x/english/requirements/70mpsysreqs.html
Configuring the Update Site to Host Cisco Unified MeetingPlace Click-to-Conference
with IBM Lotus Sametime Instant Messaging on your IBM Lotus Domino Server
All Cisco Unified MeetingPlace IBM Lotus Sametime plug-ins must be hosted on a web server, called an Update Site, so that the
end user can download it.
Procedure
Step 1 Enable the http service on your IBM Lotus Domino server.
Step 2 Create a directory in the C:\Program Files\Lotus\Domino\data\domino\html directory. For example, if you create a
directory called “plugins” and place your Update Site in that directory, then you can browse to the Update Site through
http://<your-domino-server>/plugins/site.xml.
Step 3 Download the .tar file containing the plug-in to the directory that you created in Step 2.
Step 4 Extract the contents of the .tar file to a temporary directory.
Step 5 Move the contents of the temporary directory to the directory that you created in Step 2.
Step 6 Note the full http path to the site.xml file, for example, http://<your-domino-server>/plugins/site.xml. This path is used
during installation of the plug-in.

3
2 How to Install Cisco Unified MeetingPlace Click-to-Conference with
IBM Lotus Sametime Instant Messaging
There are two ways that end users can access Cisco Unified MeetingPlace Click-to-Conference with IBM Lotus Sametime Instant
Messaging: by the end user “pulling” it from the server or by having the server “push” it to the end user.
•About Installing the Plug-In by Pulling it from the Server, page 3
•Installing the Plug-In by Pushing it to End Users, page 3
About Installing the Plug-In by Pulling it from the Server
Note We recommend using this method if installing Cisco Unified MeetingPlace Click-to-Conference with IBM Lotus
Sametime Instant Messaging is optional for your end users. If installation is mandatory, we recommend that you push
the plug-in to them as described in the following section.
End users can pull the plug-in from the server and install it themselves. To facilitate this, provide them with the following:
•The Quick Start Guide for Installing and Using Cisco Unified MeetingPlace Click-to-Conference with IBM Lotus Sametime
Instant Messaging. This guide describes how to install, configure, and use Cisco Unified MeetingPlace Click-to-Conference
with IBM Lotus Sametime Instant Messaging.
•The http path, discussed in the “Configuring the Update Site to Host Cisco Unified MeetingPlace Click-to-Conference with
IBM Lotus Sametime Instant Messaging on your IBM Lotus Domino Server” section on page 2.
Installing the Plug-In by Pushing it to End Users
•Configuring the Update Site in IBM Domino Administrator, page 3
•Configuring the Update Site in the IBM Lotus Sametime Web Server, page 4
Configuring the Update Site in IBM Domino Administrator
Before You Begin
Log into IBM Domino Administrator.
Procedure
Step 1 Select the tab for the domain that you are configuring.
Step 2 Select the Files tab.
Step 3 Open the Sametime configuration called stconfig.nsf by double-clicking on it.
Step 4 Open the Community Client configuration by double-clicking on the date.
Step 5 Enter the http path to the Update Site, as described in the “Configuring the Update Site to Host Cisco Unified
MeetingPlace Click-to-Conference with IBM Lotus Sametime Instant Messaging on your IBM Lotus Domino Server”
section on page 2, into the URL for UIM Provisioning field.
Step 6 Click Close > Save.

Americas Headquarters
Cisco Systems, Inc.
San Jose, CA
Asia Pacific Headquarters
Cisco Systems (USA) Pte. Ltd.
Singapore
Europe Headquarters
Cisco Systems International BV
Amsterdam, The Netherlands
Cisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on the
Cisco Website at www.cisco.com/go/offices.
Configuring the Update Site in the IBM Lotus Sametime Web Server
Procedure
Step 1 Log in to your IBM Lotus Sametime server at http://<your-sametime-server>/stcenter.nsf.
Step 2 Click Administer the server.
Step 3 Click Policies in the left panel.
Step 4 Click Sametime Default Policy in the right panel.
Step 5 Scroll to the Instant Messaging section.
Step 6 Enter the http path to the Update Site, as described in the “Configuring the Update Site to Host Cisco Unified
MeetingPlace Click-to-Conference with IBM Lotus Sametime Instant Messaging on your IBM Lotus Domino Server”
section on page 2, into the Sametime update site URL field.
Step 7 Click OK.
Step 8 Restart your IBM Lotus Sametime server.
3 Logging Information for Cisco Unified MeetingPlace Click-to-Conference
with IBM Lotus Sametime Instant Messaging
If any unexpected or irresolvable issues occur, detailed logging information is available that can assist in troubleshooting the
issue. When troubleshooting issues with Cisco Unified MeetingPlace Click-to-Conference with IBM Lotus Sametime Instant
Messaging, look in the following log file directories for errors and warnings:
•C:\Documents and Settings\<username>\Application Data\Lotus\Sametime\logs, where <username> is the windows user
name of the subscriber. The most recent log file is named sametime.log.0.
•C:\Documents and Settings\<username>\Application Data\Lotus\Sametime\.metadata\.log, where <username> is the
windows user name of the subscriber.
CCDE, CCENT, Cisco Eos, Cisco Lumin, Cisco Nexus, Cisco StadiumVision, Cisco TelePresence, Cisco WebEx, the Cisco logo, DCE, and Welcome to the Human Network
are trademarks; Changing the Way We Work, Live, Play, and Learn and Cisco Store are service marks; and Access Registrar, Aironet, AsyncOS, Bringing the Meeting To
You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems,
Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, EtherFast, EtherSwitch, Event Center, Fast Step, Follow Me Browsing,
FormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, iQuick Study, IronPort, the IronPort logo, LightStream, Linksys, MediaTone, MeetingPlace, MeetingPlace
Chime Sound, MGX, Networkers, Networking Academy, Network Registrar, PCNow, PIX, PowerPanels, ProConnect, ScriptShare, SenderBase, SMARTnet, Spectrum
Expert, StackWise, The Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its
affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply a partnership relationship
between Cisco and any other company. (0809R)
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the
document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2008 Cisco Systems, Inc. All rights reserved.