CITERNEO EFFLUENTS User manual

FLEXIBLE TANK EFFLUENTS
1
2a 2b 4
3a 3b
page 1
Date de création : 29/10/2014 DC-CN-38 Version 12 - 18/10/2022
V. (m
3
)
1 to 180 1 to 2
180 to 480 3 to 4
480 to 700 4 to 6
Number
of people
-1%
-1%
AA
BB
-1 % 00
AA
00 -1 %
BB
Clean and leveled ground
+ a layer of sand (0/2) 10 cm (+/-2 cm)
Slope45°
length + 1,50 m
length + 1,50 m
-1 % 00
AA
00 -1 %
BB
-1%
-1%
AA
BB
Membrane caught into the embankment
Installation of the tank
according to its volume
Membrane on low walls
Clean and leveled ground
+ a layer of sand (0/2)
10 cm (+/-2 cm)
Membrane on embankment
Membrane fixed to low walls
IMPORTANT
It is strictly forbidden
to handle the product with machines
to avoid any deterioration
WARNING
If the filling is not done immediately:
ballast the tank
with a minimum of 5 cm of liquid

FLEXIBLE TANK EFFLUENTS
7
56
8 9 10
Date de création : 29/10/2014 DC-CN-38
page 2
Version 12 - 18/10/2022
MANDATORY
Mounting pads
necessarily
before filling
for each angle
Use a 10 wrench
(not provided)
x4
TOILETOILE
0,5 m
0,5 m
0,5 m
0,5 m
Follow the unfolding plan
attached to this installation guide
Unfold the tank according to the diagram
Stir the tank by the angles from top to botton manually Shake and spread correctly the tank to remove all the folds
It is ESSENTIAL
to install
the tank correctly for the filling
This step is
necessary to pass air under
the tank to facilitate its movement and
positioning
FOR ALL THE PIQUAGES
Install correctly
the counterflange
in its branch
STRETCH WITH CARE
without tools, in order to pass
insite the counterflange with its seal
11
Use a 13 wrench
(not provided)
Overtightening can cause
the counterflange to break

Date de création : 29/10/2014 DC-CN-38 Version 12 - 18/10/2022
FLEXIBLE TANK EFFLUENTS page 3
Shake and spread correctly the tank: remove all the folds on the surface before filling it.

Overview
on low walls
Follow
the user
instructions
14 15
Follow
the user
instructions
Overview
on embankment
Overtightening can cause
the counterflange to break
12
13 ESSENTIAL STEPS TO RENEW
Stir the tank manually by the angles from top to bottom

Use a 13 wrench
(not provided)