Citizen CL-S700 User manual

CL-S700 INSTALLATION MANUAL for OPTION PEELER
１．Remove the front 3
p
arts. Remove the 2
p
arts in the both side first, then remove the
p
art
in center.
Remove 3 screws
Remove 2
Remove 2 screws
Remove 3
t
【CAUTION when using the option peeler】
Print speed must be set to 7IPS or below

２．"Plastic cover" on the
p
art removed from the center must be chan
g
ed to "Metal
g
uide frame"
３．Install the
p
eeler itself b
y
usin
g
1 lon
g
screw
Peeler must be held by attached 1 long screw and
holding position must be the center.
Remove 2 screws
This part must be change to "Metal gide frame"
Metal guide frame
Hold by 2 screws

４．Install the center
p
art to the ori
g
inal
p
osition
５．Install the 2
p
arts in the both side, then the installation of the
p
eeler is com
p
leted
Peeler must be held by Metal guide frame properly
Hold by attached 1 short
2 parts are installed
2 screws