Cl M-LC-0019 User manual

OXFORD RATTAN CONSOLE TABLE
M-LC-0019 / CTL-104-BLK

IMPORTANT! PLEASE READ THESE INSTRUCTIONS
CAREFULLY AND RETAIN FOR FUTURE REFERENCE
⚠WARNING:
Failure to FOLLOW THESE ASSEMBLY INSTRUCTIONS AND WARNINGS may result in
serious injury or death.
NOTE: CREATIVELAND FURNITURE DISCLAIMS ANY LIABILITY FOR DAMAGES OR IN
INJURIES WHICH MAY OCCAR DUE TO FAILURE TO PROPERLY FOLLOW ASSEMBLY
INSTRUCTIONS, PROPERLY ASSEMBLE THE PRODUCT, OR PROPERLY USE THE
PRODUCT.
•This product has been fitted with an anchor strap/bracket. To prevent your furniture from tipping
forward it is strongly recommended that you securely attach this product to a wall or other solid
surface, using the provided anchor strap/bracket and appropriate fixings. Different surface materials
require different attachments. Please seek professional advice if you are in doubt what fixing device
to use.
• Do not overload unit. If any shelf, top, or bottom of unit bows or bends, it is overloaded. The shelf,
top, or bottom could collapse and cause serious bodily injury and/or damage to personal belongings.
Maximum loads given below:
º Drawer: 5 kg
º Top surface: 10 kg
º Lower shelf: 5 kg
• Do not mount or attach anything to the sides, rear or front of the unit as this can create a force
which can cause the unit to tip. Serious bodily injury and/or damage to personal belongings may
occur.
• Do not stack units. Stacking of units can cause an unsafe tip-over hazard which may cause
serious bodily injury and/or damage to personal belongings.
• Do not hang this unit on the wall. The product structure is not designed for wall hanging. Serious
bodily injury, damage to personal belongings, and/or damage to the wall may occur.
• Do not climb or step on the unit.
• Do not use this product as a step stool/ ladder. The unit may become unstable and either tip or
collapse. Serious bodily injury and/or damage to personal belongings may occur.
• Do not use this unit as a television stand. Serious bodily injury and/or damage to personal
belongings may occur.
•If the product is broken or damaged, or the joints become loose, discontinue use immediately.
•Keep away from naked flame.
•This product has been designed for indoor, domestic use only. It is not intended for commercial
use.

INSTRUCTIONS FOR ASSEMBLY
Important: Please READ these instructions completely BEFORE ASSEMBLING.
• Mild odours may be present when first opening the packaging. Air the opened box outside and
this will fade.
• This unit contains small parts which could be a choking hazard for small children. Children
should be under adult supervision at all times or serious injury could occur.
• Where possible, assemble the product close to its intended location, to avoid moving it
unnecessarily once assembled.
• Always unload unit prior to moving the unit. The weight of personal belongings can cause the
unit to become unstable and either tip or collapse. Serious bodily injury and/or damage to
personal belongings may occur.
• Carefully check that you have all parts and fittings and ensure they are undamaged before
starting assembly and disposing of the packaging.
• Keep all packaging and fittings out of the reach of children and keep them away from the
construction area.
• We recommend you hand-tighten screws. Use care not to overtighten if using power tools.
• At least two (2) competent adults are required to assemble this product.
• Ensure that the product is assembled on soft, even surface, to avoid any damage to the
furniture.
•This product must be placed on a solid, even floor, taking care to ensure that all legs remain in
contact with the ground.Stability of tall items may be affected by thick pile carpet or uneven floors.
• Ensure that there is sufficient space to assemble the product safely.
• Before commencing each stage of the assembly, review the instructions and identify the fittings
and parts needed for the step.
• Do not completely fasten the fittings until all fittings are in place.Using uncompatible hardware
might cause damage to product.
• Make sure all joints are tightened securely, however take care not to over-tighten the fittings as
this may damage the product.
⚠For your safety when attaching the wall bracket/anchor fixings, please note the following:
o Check for any electrical wires or plumbing inside the wall before drilling any holes (if you are
unsure, please seek professional advice from a qualified tradesperson)
o Walls are constructed from different materials, for example, masonry (solid brick) or
plasterboard lined cavity walls (hollow). It is important that you use the appropriate wall
fixings for your wall type.
o Your local hardware store will have the necessary drills and fixings and can offer advice if
needed. If in doubt, engage the services of a qualified tradesperson to install and anchor the
product.
CARE INSTRUCTIONS
•To clean this product, wipe clean with a damp cloth only.
•Do not use any abrasive cleaning agents.
•If liquid spills onto this product, wipe clean as soon as possible to prevent any damage.
•Regularly check all fittings and joints and re-tighten if necessary.
•Regularly check that wall anchors/brackets are securely maintained.

•To prolong the life and appearance of this product keep in a dry area, away from directsunlight.
☞Customer Support
•NEED HELP? For missing part requests or product inquiries, please contact our Customer Service
Team by emailing us at Please listed your order number on your
subject.
Thank you for selecting CREATIVELAND!
[e-mail]

4x30mm
4x35mm 3x12mm
4x14mm 5x50mm
4x40mm
DL DR
CRCL

DL x 2
DR x 2
DR
DR
DL
DL

CL x 1
CL
CR x 1
CL x 1
CR x 1
CR
CR
CL

CAUTION:
○Check for any electrical wires or
plumbing inside the wall before
drilling any holes (if you are unsure
please seek professional advice
from a qualified tradesperson).
○Walls are constructed from different
materials, for example, masonry
(solid brick) or plasterboard lined
cavity walls (hollow). It is important
that you use the appropriate wall
fixings for your wall type.
○Your local hardware store will have
the necessary drills and fixings and
can offer advice if needed. If in doubt,
engage the services of a qualified
tradesperson to install and anchor the
product.