Claridge calyx Aceno Cart User manual

Aceno Cart
ASSEMBLY INSTRUCTIONS
WARNING
Risk of injury to installers and users
Read the entire assembly directions before
beginning assembly.
Hardware & Tools Required
Tools:
5/32” Allen Key (Not included)
Hardware:
¼”-20 x 5/8” Button Head Hex Screw – 16
¼” lock washer – 16
Swivel Caster – 2
Ridged Caster – 2

800-434-4610
Calyxbyclaridge.com
Swivel Casters
Ridged Casters
ACENO Cart
Assembly
1. Gently place ACENO Cart on onside as shown
above. (2 people required)
2. Use a 5/32” Allen Key to attach the ¼-20 x 5/8”
Screw with locker washer (4 each per caster)
Attach Ridged casters to the open front section of
the cart.
3. Repeat step 2. To attach the Swivel casters to the
back section of the cart.
4. Carefully return cart to upright position.
Your ACENO Cart is now ready to store your ACENO
Panels. Enjoy!