Backyard Creations Laurel Ridge M22102C User manual

Diagram 1
NOTE: IT IS USER'S RESPONSIBILITY TO MAKE SURE ALL PARTS ARE ASSEMBLED AND TIGHTENED
PROPERLY AND SECURELY.
**TO AVOID POTENTIAL SCRATCHING TO PARTS BY ROUGH GROUND SURFACE, COVER GROUND WITH SOFT
SMOOTH PROTECTIVE MATERIAL ON WHICH TO PLACE PARTS DURING ASSEMBLY. **
Laurel Ridge 2PK Sling Swivel Rocker Chair
M22102C/2722171
Assembly Instructions
Step 4: Make sure all bolts are aligned properly and tightened securely. Then place Bolt Covers (H) and
Nut Covers(I) over Bolts and Nuts. And then attach the complete seat bucket to Base (B) as shown in
Diagram 2.
Step 1: Remove protective wrapping and lay all parts on floor. Identify all parts packed in carton against
the parts list.
Step 2: Lay Seat Bucket (A) on its front side. Align each pair of holes on the two Fiber Springs of the T-
bracket (C) to the two pair of holes on the Brace of the Seat Bucket(A). Then place C-Brackets(I) over Brace
and Fiber Springs so all holes are aligned correctly as shown in Diagram 1.
Step 3: Attach this assembly together with Bolts (D), Washer(E), Spring Washers(F), Nuts(G). Put all bolts,
washers, and nuts in their proper positions first before tightening securely with Hex Wrench(K).
AC
JC-Bracket
Fiber Spring
Brace
IG
F
E
D
H
Fiber Spring
Brace
1 of 2

Diagram 3
Ref
Part Name Part Image Qty
Ref
Part Name Part Image Qty
A
Seat Bucket 1
B
Base 1
C
T-Bracket 1
H
Bolt
Cover(M8)
8
D
Bolt(M8) 4
I
Nut Cover 8
E
Washer(M8) 4
J
C-Bracket 2
F
Spring
Washer(M8)
4K
Hex
Wrench(M8)
2
G
Nut 4
11-2020 PRINTED IN CHINA
Diagram 2
WOODARD
Customer Service Hours
8:00am-5:00pm CST Monday to Friday
Phone: [phone] Fax: [phone]
E-mail: [e-mail]
Parts List:
B
2 of 2