Hay REVOLVER TABLE User manual

–INSTRUCTION MANUAL –
DESIGN BY LEON RANSMEIER
REVOLVER BAR STOOL

–PARTS –

A Seat x1

B Base x1

C Screw x4

1.
Place section  A upside down on a protected surface. Now place section  B
upside down on top of section  A , making sure the 6 holes on section  B are
aligned with the exposed bearing.

2.
Fix the two parts together using the bolts  Cprovided, making sure that you partially
tighten the bolts in turn until all of them have been fully tightened.

3.
Turn the bar stool over.

4.
Done!

–CARE & MAINTENANCE –
Our Care & Maintenance offers guidance for optimal
maintenance of your HAY product. It includes advice
and instructions on cleaning and caring for specific
materials to prolong the life of your furniture.
Please find our Care & Maintenance
guide by scanning the QR code
You can find more relevant information on
Revolver Bar Stool by scanning the QR code
You can also find the same information here
hay.dk/downloads

Havnen 1 8700 Horsens Denmark
[phone] / [e-mail]
14/10/2021