Clam 110740 User manual

RUNNER KIT
Part No.110740
Instruction No.103422-B
FOR: SCOUT/PRO/PRO TC/GUIDE
NANOOK/LEGEND THERMAL/TRAPPER
Please contact customer service directly at the E-mail or phone number listed below for any
quality issues. ONCE USED THIS PRODUCT CANNOT BE RETURNED TO STORE.
** Warranty cannot be honored without an original, dated receipt **
This product is warranted to the original retail purchaser its product be free from manufacturers defects
for one (1) year from the date of the original purchase. Clam Outdoors will replace or repair (Clam’s
option) any part found defective within the one (1) year time limit. All parts must be returned to Clam
Outdoors. Before returning any parts, you must first call or write and acquire a return authorization. All
returns must be returned postage-prepaid and include the original cash register receipt (date and purchase
price).
To obtain a return authorization, please use one of the following methods:
Customer Service Hrs: 9am to 4pm, Monday –Friday Central Standard Time
Clam Corporation
Attn: Customer Service –Warranty Department
12135 Brockton Lane
Rogers, MN 55369
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: Clamoutdoors.com
The warranty does not apply to any Wear Runner Kit which has been subjected to an accident,
improper installation, modification, adjustment, repair, misuse, misapplication, neglect, including but not
limited to improper maintenance, or use of unauthorized parts or attachments.
In your request, please include your full name, address, phone number, a copy of your receipt, a brief
description of the problem, and pictures to clearly show the area(s) of concern. Our Warranty Department
will review your request, and a Clam representative will contact you regarding your claim status. All returns
must be shipped to us postage pre-prepaid.
It is expressly understood that Clam Outdoors, liability for its products, whether due to breach of warranty,
negligence, strict liability, or otherwise, is limited to the repair of the product as stated above. Clam
Outdoors, is not liable for any injury, loss, damage, or expense, whether direct or consequential, including
but not limited to loss of use, income, profit, or damage to material arising in connection with the sale,
installation, use of, inability to use, or the repair or replacement of Clam Outdoors products. Clam Outdoors,
reserves the right to make alterations or modifications in its products at any time, which in its opinion, may
improve the performance and efficiency of the product. It shall not be obligated to make such alterations or
modifications to products already in service.
ITEM 8995
WARRANTY INFORMATION
LIMITATION OF LIABILITY

QTY.
PART NO.
DESCRIPTION
2
103403
RUNNER, .3/8 X 2-1/2 X 56 LG
1
103422
INSTRUCTION, RUNNER KIT
1
101550
KIT, HARDWARE RUNNER (includes the following)
30
102516
SCREW,10-24 X 1" PTHMSSS
30
101548
NUT, 10-24 NYLOCK SS
30
101549
WASHER, #10 FENDER SS
Runner Kit Installation
For: Scout, Pro, Legend, Thermal and Trapper models, CUT THE RUNNERS TO 40”in length.
For: Nanook, and Guide models, NO CUTTING IS REQUIRED.
1. Position the strips on the base. Using a 3/16” or slightly larger drill bit, drill a hole through runner strip
and base starting at the curved end of the base.
2. Slightly tighten fasteners to hold the strip in place so that you may then bend the runner around the
curved area before drilling the next hole
(If you have trouble bending the Wear Strip to the contour of the base, use a heat gun or hair dryer to
make the Strips more pliable before drilling.)
(Also, apply a small amount of grease to threadsof screw to preventseizingof threads.)
3. Drill next hole through the runner strip and base and slightly tighten fastener to hold the runner in
place.
4. Keep repeating this procedure EVENLY SPACING the remaining holes and securely tighten all
fasteners once they are all installed.
5. Repeat same process for remaining runners.
PARTS LIST
START HERE
56”
SCOUT, PRO,LEGEND,THERMAL AND TRAPPER
NANOOK AND GUIDE
40”
START HERE
Scout, Pro, Trapper, Legend Thermal
Nanook, Guide