
The CS-KFB-10 is a portable device used to remotely
control a security system. The buttons can be congured
to arm, disarm, trigger panic alarms, or control home
automation functions.
Features
• 5 buttons
• Supports button combinations
• Low battery indication
• Secure encrypted wireless transmissions
Enroll the Five Button Fob by placing the panel into
wireless enrollment mode and pressing the away and stay
arming buttons simultaneously. Alternatively, the fob
can be enrolled by scanning its bar code using the Install
Assist App or by entering its 8-character serial number on
the interactive service provider’s web portal.
Operate by pressing the desired button until the LED
illuminates.
Button Tips
• By default, pressing STAY and AWAY will
cause a panic alarm.
• Panic alarms triggered from a fob can not be
canceled from the same fob.
• The buttons can be congured in the panel
settings to do different things.
• Buttons and button combinations can be
used to trigger home automation scenes.
Pro Tips
In CE applications, the fob must be used near the point
of exit so that arming can be veried.
To replace the battery, remove the screw on the back of
the fob and unsnap the back from the cover. Replace
the battery and reinstall the cover.
Use the panel installation guide to verify proper system setup.
I
N
S
T
A
L
L
G
U
I
D
E
Arm Stay
Arm Away
AuxDisarm
Lights
LED
Screw
CS-KFB-10 5-Button
Security Keyfob