clare Varifocal Series User manual

ClareVision Video
Surveillance
Varifocal Series Bullet Camera
Installation Guide
1 | ClareVision Varifocal Series Bullet Cameras

Box Contents
For Setting up cameras and complete user
manuals, please scan these QR codes:
https://bit.ly/34bIlND
Quick Start Guide
https://bit.ly/34eKmsq
User Manual
• Camera
• Mounting template
• Mounting kit
• Accessory kit
Required Equipment
• Phillips head screwdriver
• Power source: Ethernet cable
• Drill with ¼” drill bit
2 | ClareVision Varifocal Series Bullet Cameras

Inspection
Ensure that the device is in good condition and
all the assembly parts are included.
• Make sure that all equipment is powered o
during installation.
• Ensure the mounting surface is strong enough
to withstand three times the weight of the camera
and the mount.
• If the product does not function properly, please
contact technical support. Do not disassemble
the camera for repair or maintenance.
WARNING: This product can expose you
to chemicals including cadmium, which
which is known to the State of California to cause
cancer. For more information, go to
www.p65warnings.ca.gov.
3 | ClareVision Varifocal Series Bullet Cameras

Overview
Before installing, familiarize yourself with
the diffferent parts of the camera.
4 | ClareVision Varifocal Series Bullet Cameras

Installation
1. Drill a cable hole and ¼” pilot holes using
the supplied template.
2. Connect an ethernet cable that is connect-
ed to the desired POE enabled network into
the camera’s ethernet adapter.
5 | ClareVision Varifocal Series Bullet Cameras

Installation
3. Insert the drywall anchors. Secure the base
to the mounting surface using provided
screws.
6 | ClareVision Series Varifocal Bullet Cameras

Installation
4. Using the provided hex-key, loosen the
machine screws and adjust the viewing
angle.
7 | ClareVision Varifocal Series Bullet Cameras
5. Using the provided hex-key, tighten the
machine screw on the side until the camera
body is secured firmly to the base.

8 | ClareVision Varifocal Series Bullet Cameras
Support
For additional help:
Integrator/Dealer Support:
Phone: [phone]
Email: [email protected]
For more information, instructional videos, or
support documentation, visit our Help Center
and view your item’s product page:
https://www.clarecontrols.com/helpcenter
Camera Setup & Default Password
IMPORTANT NOTE: The default camera
setup password is the FIRST 6 Characters
of the UUID/SN.
You will be prompted to change the
password when setting up the camera.
Please refer to the Quick Start Guide for
complete setup instructions or by visiting:
https://bit.ly/34bIlND

Contact Information
Clare Controls, LLC.
7519 Pennsylvania Ave, Suite 104
Sarasota, FL 34243
General: 941.328.3991
Fax: [phone]
www.clarecontrols.com
Warranty Information
Clare Controls offers a two (2) year limited
warranty on original Clare Controls
components, from the date of shipment
from Clare Controls. To view complete
limited warranty details, including limitations
and exclusions, please visit:
www.clarecontrols.com/warranty
9 | ClareVision Varifocal Series Bullet Cameras

Camera Information
Please provide this guide to the customer
and notate the camera installation location
and new camera password. This guide
includes important camera details.
Camera Password:_____________________
Installattion Location:___________________
Camera Details:
Product
Label
10 | ClareVision Varifocal Series Bullet Cameras
Doc ID: 2021-03-2082-04