2
Contents Nano Series GigE Vision Camera
OPERATIONAL REFERENCE 28
USING CAMEXPERT WITH GENIE NANO CAMERAS 28
CamExpert Panes 28
CamExpert View Parameters Option 29
CAMERA INFORMATION CATEGORY 30
Camera Information Feature Descriptions 30
Temperature Management 33
Power-up Configuration Dialog 34
Camera Power-up Configuration 34
Load / Save Configuration 34
SENSOR CONTROL CATEGORY 35
Sensor Control Feature Descriptions 36
Offset/Gain Control Details 38
Bayer Mosaic Pattern 39
Native Sensor Exposure Timing 39
External Trigger Characteristics: Models M/C1940 & M/C1920 39
Exposure Controls Detail 40
Synchronous Mode Timing 40
Internal Programmable Exposure (ExposureMode = Timed) 41
External Trigger: Programmable Exposure 41
External Trigger: Trigger Width Exposure 42
I/O CONTROL CATEGORY 43
I/O Control Feature Descriptions 44
I/O Module Block Diagram 47
Trigger Mode Details 48
Trigger Source Types (Trigger Mode=On) 48
Input Line Details 48
Trigger Overlap: Feature Details 49
Output Line Details 52
Output High and Output Low Block Diagram 52
COUNTER AND TIMER CONTROL CATEGORY 53
Counter and Timer Control Feature Description 53
Counter and Timer Group Block Diagram 57
Example: Counter Start Source = OFF 58
Example: Counter Start Source = CounterEnd (itself) 58
Example: CounterStartSource = EVENT and Signal (Edge Base) 59
Example: CounterStartSource = Line (Edge Base) Example 59
IMAGE FORMAT CONTROL CATEGORY 60
Image Format Control Feature Description 61
Width and Height Features for Partial Scan Control 64
Vertical Cropping (Partial Scan) 64
Maximum Frame Rate (fps) Examples 65
Horizontal Cropping (Partial Scan) 65
Using the Multiple ROI Mode 66
Important Usage Details 66
Example: Two Horizontal ROI Areas (2x1) 66
Example: Four ROI Areas (2x2) 67
Example: Actual Sample with Six ROI Areas (3x2) 67
Internal Test Pattern Generator 69
ACQUISITION AND TRANSFER CONTROL CATEGORY 70
Acquisition and Transfer Control Feature Descriptions 70
Acquisition Buffering 72
Using Transfer Queue Current Block Count with CamExpert 72
Features that Cannot be Changed During a Transfer 72
EVENT CONTROL CATEGORY 73
Event Control Feature Descriptions 74
