Clarion CZ101A User manual

Owner's manual & Installation manual
使用说明书 & 安装手册
사용설명서 및 설치설명서
CD/MP3/WMA RECEIVER
CD/MP3/WMA 接收机
CD/MP3/WMA 수신기
CMU1521194D(CZ101A) manual.indb 1 2010-8-20 9:54:25

English
1
1. FEATURES........................................................................................................................2
2. PRECAUTIONS .................................................................................................................3
Front Panel / Generalities..................................................................................................3
Remove the DCP ..............................................................................................................4
Attach the DCP..................................................................................................................4
3. CONTROLS .......................................................................................................................5
Operational Panel..............................................................................................................5
Names of Buttons..............................................................................................................5
Remote Control (Sold by separately)................................................................................6
Notes of remote control using ...........................................................................................6
Handling Discs ..................................................................................................................7
4. CAUTIONS ON HANDLING ..............................................................................................7
5. OPERATIONS....................................................................................................................8
Basic Operations...............................................................................................................8
System Setup....................................................................................................................9
Audio Setup.......................................................................................................................9
Radio Operations ............................................................................................................10
CD/MP3/WMA Operations ..............................................................................................11
AUX Operations ..............................................................................................................13
6. TROUBLE SHOOTING....................................................................................................14
7. ERROR DISPLAYS..........................................................................................................15
8. SPECIFICATIONS ...........................................................................................................16
9. INSTALLATION / WIRE CONNECTION GUIDE.............................................................17
Thank you for purchasing this Clarion product.
• Please fully read this owner’s manual before operating this equipment.
Contents
CMU1521194D(CZ101A) manual.indb 1 2010-8-20 9:54:26

2
English
1. FEATURES
Front Panel 3.5mm Auxiliary Input
2ch/2V RCA Output
"BEAT-EQ" with 3 Band Parametric Equalizer & "MAGNA BASS EX" dynamic bass
enhancement
2 Channel Amplier
Expanding audio features
Portable Player
(Connect by AUX IN Jack)
Note:
The items listed outside of the frames are
the commercial products generally sold.
Expanding Systems
CMU1521194D(CZ101A) manual.indb 2 2010-8-20 9:54:26

English
3
2. PRECAUTIONS
Front Panel / Generalities
For a longer service life, be sure to read the
following cautions.
• Do not allow any liquids on the set from
drinks, umbrellas, etc. Doing so may
damage the internal circuitry.
• Do not disassemble or modify the set in
any way. Doing so may result in damage.
• Do not let cigarettes burn the display.
Doing so may damage or deform the
body.
• If a problem should occur, have the set
inspected at your store of purchase.
• The remote control unit may not work if
the remote control sensor is exposed to
direct sunlight.
Cleaning the body
• Use a soft, dry cloth and gently wipe off
the dirt.
• For tough dirt, apply some neutral
detergent diluted in water to a soft cloth,
wipe off the dirt gently, then wipe again
with a dry cloth.
• Do not use benzene, thinner, car cleaner,
etc., as these substances may damage
the body or cause the paint to peel. Also,
leaving rubber or plastic products in
contact with the body for long periods of
time may cause stains.
For your safety, the driver should not operate the controls while driving.
Also, while driving, keep the volume to a level at which external sounds can be heard.
1. When the inside of the car is very cold and
the player is used soon after switching
on the heater, moisture may form on the
disc or the optical parts of the player and
proper playback may not be possible.
If moisture forms on the disc, wipe it off
with a soft cloth. If moisture forms on
the optical parts of the player, do not
use the player for about one hour. The
condensation will disappear naturally
allowing normal operation.
2. Driving on extremely bumpy roads which
cause severe vibration may cause the
sound to skip.
3. This unit uses a precision mechanism.
Even in the event that trouble arises,
never open the case, disassemble the
unit, or lubricate the rotating parts.
WARNING
CHINA
530-1710kHz 87.9-107.9MHz
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECTTOTHE FOLLOWING TWO CONDITIONS:
(1)THIS DEVICE MAYNOT CAUSE HARMFULINTERFERENCE, AND
(2)THIS DEVICE MUST ACCEPTANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
THIS DEVICE COMPLIES WITH DHHS RULES 21 CFR CHAPTER I
SUBCHAPTER J APPLICABLEAT DATE OF MANUFACTURE.
CLARION CO.,LTD.
7-2,SHINTOSHIN,CHUO-KU,SAITAMA-SHI,SAITAMA-KEN,JAPAN
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
MANUFACTURED:
URF
PN:127070006874TX-1062B-A
65 mm
65 mm
CHINA
530-1710kHz 87.9-107.9MHz
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECTTO THE FOLLOWING TWO CONDITIONS:
(1)THIS DEVICE MAYNOT CAUSE HARMFUL INTERFERENCE, AND
(2)THIS DEVICE MUST ACCEPTANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
THIS DEVICE COMPLIES WITH DHHS RULES 21 CFR CHAPTER I
SUBCHAPTER J APPLICABLEAT DATE OF MANUFACTURE.
CLARION CO.,LTD.
7-2,SHINTOSHIN,CHUO-KU,SAITAMA-SHI,SAITAMA-KEN,JAPAN
MANUFACTURED:
URF
PN:127070006834TX-1061B-A
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
65 mm
65 mm
65 mm
65 mm
CHINA
531-1602kHzMW
FM
LW 153-279kHz
87.5-108MHz
PN:127070006887TX-1072E-A
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
03 2120
CHINA
530-1710kHz 87.9-107.9MHz
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECTTO THE FOLLOWING TWO CONDITIONS:
(1)THIS DEVICE MAYNOT CAUSE HARMFUL INTERFERENCE, AND
(2)THIS DEVICE MUST ACCEPTANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
THIS DEVICE COMPLIES WITH DHHS RULES 21 CFR CHAPTER I
SUBCHAPTER J APPLICABLEAT DATE OF MANUFACTURE.
CLARION CO.,LTD.
7-2,SHINTOSHIN,CHUO-KU,SAITAMA-SHI,SAITAMA-KEN,JAPAN
MANUFACTURED:
URF
PN:127070006827TX-1063B-A
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
65 mm
65 mm
65 mm
65 mm
CHINA
531-1602kHzMW
FM
LW 153-279kHz
87.5-108MHz
PN:127070006849TX-1074E-A
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
03 2120
65 mm
65 mm
CHINA
531-1602kHzMW
FM
LW 153-279kHz
87.5-108MHz
PN:127070006832TX-1072E-B
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
03 2120
65 mm
65 mm
CHINA
531-1602kHzMW
FM
LW 153-279kHz
87.5-108MHz
PN:127070006864TX-1072E-C
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
03 2120
65 mm
65 mm
531-1629kHz 87.5-108MHz
CHINA
PN:127070006890TX-1062K-A
051 722 877
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
65 mm
65 mm
531-1629kHz 87.5-108MHz
PN:127070006867TX-1062K-B
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
65 mm
65 mm
531-1629kHz 87.5-108MHz
CHINA
PN:127070006886TX-1061K-A
051 722 877
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
65 mm
65 mm
531-1629kHz 87.5-108MHz
PN:127070006857TX-1061K-B
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
65 mm
65 mm
CHINA
531-1602kHzMW
FM
LW 153-279kHz
87.5-108MHz
PN:127070006821TX-1073E-A
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
03 2120
65 mm
65 mm
CHINA
531-1602kHzMW
FM
LW 153-279kHz
87.5-108MHz
PN:127070006835TX-1073E-B
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
03 2120
65 mm
65 mm
CHINA
531-1602kHzMW
FM
LW 153-279kHz
87.5-108MHz
PN:127070006868TX-1073E-C
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
03 2120
CHINA
530-1710kHz 87.9-107.9MHz
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECTTO THE FOLLOWING TWO CONDITIONS:
(1)THIS DEVICE MAYNOT CAUSE HARMFUL INTERFERENCE, AND
(2)THIS DEVICE MUST ACCEPTANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
THIS DEVICE COMPLIES WITH DHHS RULES 21 CFR CHAPTER I
SUBCHAPTER J APPLICABLEAT DATE OF MANUFACTURE.
CLARION CO.,LTD.
7-2,SHINTOSHIN,CHUO-KU,SAITAMA-SHI,SAITAMA-KEN,JAPAN
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
MANUFACTURED:
URF
PN:1270700XXXXXTX-10**B-A
65 mm
65 mm
CHINA
530-1710kHz 87.5-107.9MHz
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECTTO THE FOLLOWING TWO CONDITIONS:
(1)THIS DEVICE MAYNOT CAUSE HARMFUL INTERFERENCE, AND
(2)THIS DEVICE MUST ACCEPTANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
THIS DEVICE COMPLIES WITH DHHS RULES 21 CFR CHAPTER I
SUBCHAPTER J APPLICABLEAT DATE OF MANUFACTURE.
CLARION CO.,LTD.
7-2,SHINTOSHIN,CHUO-KU,SAITAMA-SHI,SAITAMA-KEN,JAPAN
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
MANUFACTURED:
URF
PN:127070006889TX-10**B-A
65 mm
65 mm
65 mm
65 mm
CHINA
531-1602kHzMW
FM
LW 153-279kHz
87.5-108MHz
PN:12707000XXXXTX-10**E-A
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
03 2120
65 mm
65 mm
CHINA
531-1602kHzMW
FM
LW 153-279kHz
87.5-108MHz
PN:12707000XXXXTX-10**E-B
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
03 2120
65 mm
65 mm
CHINA
531-1602kHzMW
FM
LW 153-279kHz
87.5-108MHz
PN:12707000XXXXTX-10**E-C
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
03 2120
65 mm
65 mm
531-1629kHz 87.5-108MHz
CHINA
PN:12707000XXXXTX-10**K-A
051 722 877
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
65 mm
65 mm
531-1629kHz 87.5-108MHz
PN:12707000XXXXTX-10**K-B
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
CHINA
530-1710kHz 87.9-107.9MHz
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECTTO THE FOLLOWING TWO CONDITIONS:
(1)THIS DEVICE MAYNOT CAUSE HARMFUL INTERFERENCE, AND
(2)THIS DEVICE MUST ACCEPTANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
THIS DEVICE COMPLIES WITH DHHS RULES 21 CFR CHAPTER I
SUBCHAPTER J APPLICABLEAT DATE OF MANUFACTURE.
CLARION CO.,LTD.
7-2,SHINTOSHIN,CHUO-KU,SAITAMA-SHI,SAITAMA-KEN,JAPAN
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
MANUFACTURED:
URF
PN:1270700XXXXXTX-10**B-A
65 mm
65 mm
65 mm
65 mm
CHINA
531-1602kHzMW
FM
LW 153-279kHz
87.5-108MHz
PN:12707000XXXXTX-10**E-A
This product includes technology owned by Microsoft Corporation and
cannot be used or distributed without a license from MSLGP.
03 2120
CMU1521194D(CZ101A) manual.indb 3 2010-8-20 9:54:27

4
English
Remove the DCP
The control panel can be detached to prevent
theft. When detaching the control panel, keep
it in the safety place and prevent scratches.
W e r e c o m m e n d t a k i n g t h e D C P
(DETACHABLE CONTROL PANEL) with you
when leaving the car.
1. Press the [SRC / ] button (2 sec.) to turn
off the power.
2. Deeply push in [OPEN] button to unlock
the DCP.
3. Hold the side popped out, remove the
DCP.
Attach the DCP
1. Hold the DCP and ensure that the panel
faces towards you. Set the right side of the
DCP into the DCP bracket.
2. Press the left side of the DCP until it locks.
CAUTION
• The DCP can easily be damaged by shocks. After removing it, be carefully not to drop it or
subject it to strong shocks.
• Once the [OPEN] button is pressed and DCP is unlocked, car vibrations can cause the DCP to
fall.
• The connector for the main unit and DCP is extremely important. Be careful not to damage it
by pressing on it with ngernails, screwdrivers, etc.
Note:
If the DCP is dirty, wipe off the dirt with a soft, dry cloth only.
CMU1521194D(CZ101A) manual.indb 4 2010-8-20 9:54:27

English
5
[SRC / ] Button
• Power / Toggle the audio source
[BAND] Button
• Select tuner band
[MENU] Button
• MP3/WMA mode – Search function.
• CD mode – No function.
• RADIO mode – No function.
• AUX mode – No function.
[ ] Button
• Press to eject disc.
[ , ] Buttons
• Previous/Next Search
[OPEN] Button
• Unlock the front panel.
[PS / AS] Button
• Scan play / Preset scan
• Auto memory store (long press)
[SOUND] Button
• Sound effect setting
[VOLUME] Knob
• Adjust volume level / Conrm (press)
[ISR] Button
• Recall ISR station stored in memory and
store current station in ISR memory (long
press)
[1~6] Buttons
• [1] Button: Scan play / Preset station 1.
• [2] Button: Repeat play / Preset station 2.
• [3] Button: Random play / Preset station 3.
• [4] Button: Play / Pause / Top play (long
press) / Preset station 4.
• [5] Button: Previous folder / Preset station 5.
10 tracks down (long press)
• [6] Button: Next folder / Preset station 6.
10 tracks up (long press)
[D] Button
• Display switch
• System setup (long press)
3. CONTROLS
Operational Panel
Names of Buttons
[SRC/ ] [D]
[ , ] [OPEN]
[PS/AS]
[SOUND]
[VOLUME]
[ISR]
[1~6] AUX Jack[BAND]
[MENU] Disc Slot [ ]
CMU1521194D(CZ101A) manual.indb 5 2010-8-20 9:54:27

6
English
Remote Control (Sold by separately)
Notes of remote control using
Inserting the Battery
1. Slide remote control unit’s rear cover in
the direction shown.
2. Insert battery (CR2025) into insertion
guides with printed side (+) up.
3. Press battery into compartment as shown.
4. Replace and slide cover until it clicks into
place.
1. Aim the remote control at the remote sensor
on the unit.
2. Remove the battery from the remote control
or insert a battery insulator if the battery has
not been used for a month or longer.
3.DO NOT store the remote control under
direct sunlight or in high temperature
environment, or it may not function properly.
4. Use “button shaped” lithium battery “CR2025”
(3V) only.
5.DO NOT subject battery to recharge,
disassemble, heat or dispose in re or water.
6. Insert the battery in proper direction
according to the (+) and (-) polarities.
7. Store the battery in a place where children
cannot reach to avoid the risk of accident.
[SRC / ] Button
• Toggle the audio source
• Power on / Power off (long press)
[, ] Buttons
• Preset station up/down
• Previous/next track
• Search(long press)
[SCN/PS/AS] Button
• Scan play / Preset scan
• Auto memory store (long press)
[BAND/TOP] Button
• Select tuner band
• Top play (long press)
[ , ] Buttons
• Volume up / down
[ ] Button
• Play / Pause
[ISR] Button
• Recall ISR station stored in memory
and store current station in ISR
memory (long press)
[DISP] Button
• Display switch
[RDM] Button
• Random play
[RPT] Button
• Repeat play
[MUTE] Button
• Mute the volume
Insertion guide
[ , ]
[ ]
[DISP]
[ISR]
[RDM]
[RPT]
[ , ]
[MUTE]
[SCN/
PS/AS]
[SRC / ] [BAND/TOP]
CMU1521194D(CZ101A) manual.indb 6 2010-8-20 9:54:27

English
7
Handling Discs
Ball-point pen
Handling
• New discs may have some roughness
around the edges. If such discs are used,
the player may not work or the sound may
skip. Use a ball-point pen or the like to
remove any roughness from the edge of
the disc.
• Never stick labels on the surface of the disc
or mark the surface with a pencil or pen.
• Never play a disc with any cellophane tape
or other glue on it or with peeling off marks.
If you try to play such a disc, you may not
be able to get it back out of the player or it
may damage the player.
• Do not use discs that have large scratches,
are misshapen, cracked, etc.
Use of such discs may cause misoperation
or damage.
• To remove a disc from its storage case,
press down on the center of the case and
lift the disc out, holding it carefully by the
edges.
• Do not use commercially available disc
protection sheets or discs equipped with
stabilizers, etc. These may damage the
disc or cause breakdown of the internal
mechanism.
Storage
• Do not expose discs to direct sunlight or
any heat source.
• Do not expose discs to excess humidity or
dust.
• Do not expose discs to direct heat from
heaters.
Cleaning
• To remove ngermarks and dust, use a soft
cloth and wipe in a straight line from the
center of the disc to the circumference.
• Do not use any solvents, such as
commercially available cleaners, anti-static
spray, or thinner to clean discs.
• After using special disc cleaner, let the disc
dry off well before playing it.
On Discs
• Never turn off the power and remove the
unit from the car with a disc loaded.
CAUTION
For your safety, the driver should not insert
or eject a disc while driving.
Roughness
4. CAUTIONS ON HANDLING
CMU1521194D(CZ101A) manual.indb 7 2010-8-20 9:54:27

8
English
5. OPERATIONS
Basic Operations
Note:
• Refer to the diagrams in “3. CONTROLS”
when reading this chapter.
CAUTION
When the unit is turned on, starting and
stopping the engine with its volume
raised to the maximum level may harm
your hearings.
Be careful about adjusting the volume.
Power on / off
Notes:
• Start the engine before using this unit.
• Be careful about using this unit for a long
time without running the engine. If you
drain the car’s battery too far, you may not
be able to start the engine and this can
reduce the service life of the battery.
1. Start the engine. The power button / knob
illumination on the unit will light up.
Engine ON
position
2. Press the [SRC / ] button on the front
panel or the remote control to turn on the
power under standby mode. The unit goes
back to the last status after power on.
3. Press and hold the [SRC / ] button on
the front panel or the remote control to
turn off the power.
Mute
Press the [MUTE] button on the remote
control to mute the volume from the unit.
Note:
Doing the operation above again or adjusting
volume will release muting.
Volume adjustment
Turn the [VOLUME] knob on the front panel
or press the [ , ] buttons on the remote
control.
The adjustable range of volume is 0 to 40.
CAUTION
While driving, keep the volume level at
which external sounds can be heard.
Playing source selection
Press [SRC / ] button on the front panel
and remote control repeatedly to choose
desired playing source.
Notes:
Playing source selection means selecting
work mode, such as DISC mode, RADIO
mode and AUX mode.
Display system time
Press the [D] button on the front panel or
[DISP] button on the remote control to switch
the display information, system time and
playing source.
RESET
Note:
* When the [RESET] button is pressed,
frequencies of radio stations, titles, etc.
stored in memory are cleared.
RESET
CMU1521194D(CZ101A) manual.indb 8 2010-8-20 9:54:27

English
9
At all mode, press and hold [D] button to
enter system setup. Press [ , ] buttons
to select options, rotate the [VOLUME] knob
to adjust.
CLOCK
Press the [VOLUME] knob to enter clock
setting mode, rotate the [VOLUME] knob
to set clock, press [ ] or [ ] button to
select hour or minute, press and hold the
[VOLUME] knob to conrm.
DX/LO (RADIO mode)
Rotate the [VOLUME] knob to choose radio
local or distant at RADIO mode.
• LO: Only stations with strong signal can
be received.
• DX: Stations with strong and weak signals
can be received.
AUX SENS (AUX mode)
Rotate the [VOLUME] knob to choose AUX
Input sensitivity LOW, MID or HIGH at AUX
mode.
SCRN SVR: ON/OFF
Rotate the [VOLUME] knob to choose SCRN
SVR (screen saver) ON or OFF.
SCROLL: ON/OFF
For track information that is longer than the
display panel:
When SCROLL is ON, the LCD will display
ID3 TAG information cyclely, e.g: TRACK-
>FOLDER->FILE->ALBUM->TITLE-
>ARTIST->TRACK->...
When SCROLL is OFF, the LCD will display
one of the ID3 TAG information, the default
is TRACK, but user can adjust it to other ID3
System Setup
TAG information by press [BAND] button.
DIMMER: ON/OFF
Rotate the [VOLUME] knob to choose
DIMMER ON or OFF.
• ON: LCD dimmer is active when small light
of vehicle is turned ON.
• OFF: LCD always maximum brightness
regardless of the vehicle small light.
REAR/S-W
Rotate the [VOLUME] knob to choose REAR
or S-WOOFER (SUB-WOOFER).
TEL-SW
Rotate the [VOLUME] knob to choose MUTE,
ON or OFF.
• MUTE:
The sound from this unit is muted during
telephone calls.
• OFF:
This unit continues normal operation even
when the cellular phone is used.
• ON:
You can listen to your telephone calls from
the speakers connected to this unit.
*When listening to your calls on your car
speakers, you can adjust the volume by
turning the [VOLUME] knob.
BEEP: ON/OFF
Rotate the [VOLUME] knob to choose button
beep sound ON or OFF.
12/24H
Rotate the [VOLUME] knob to choose time
format: 12 or 24 hour.
Press the [SOUND] button to enter sound
effect setting mode. First press shows current
EQ. Rotate the [VOLUME] knob to changes
BEAT EQ in this order:
OFF -> B-BOOST -> IMPACT -> EXCITE ->
CUSTOM
Press the [SOUND] button, then press [ ,
] buttons to select USER preset including:
Audio Setup
BALANCE -> FADER -> M-B EX -> LPF(low
pass lter) -> S-W VOL (Subwoofer Volume),
rotate the [VOLUME] knob to select a value.
BALANCE:LEFT 1-7->CENTER->RIGHT 1-7
FADER:FRONT 1-7->CENTER->REAR 1-7
M-BEX: ON/OFF
LPF: THROUGH/80/120/160
SUBW VOL: (-6)-(+6)
CMU1521194D(CZ101A) manual.indb 9 2010-8-20 9:54:28

10
English
Select tuner as playing source
Press [SRC / ] button once or more to
enter RADIO mode.
Select one radio band
Press the [BAND] button to select one radio
band among FM1, FM2, FM3 and AM.
Manual tuning
During manual tuning, the frequency will be
changed in steps.
Press the [ ] / [ ] buttons on the
panel to tune in a higher / lower station.
Auto tuning
Press and hold the [ ] / [ ] buttons
on the panel or remote control to seek a
higher / lower station.
To stop searching, repeat the operation
above or press other buttons having radio
functions.
Note:
When a station is received, searching stops
and the station is played.
Preset scan
Preset scan receives the stations stored
in preset memory in order. This function is
useful when searching for a desired station
in memory.
1. Press the [PS/AS] button.
2. When a desired station is tuned in, press
the [PS/AS] button again to continue
receiving that station.
Note:
Be careful not to press and hold the [PS/AS]
button for 2 seconds or longer, otherwise the
auto store function will begin and the unit
starts storing stations.
Radio Operations
Auto store
Only stations with sufcient signal strength
will be detected and stored in the memory.
Press and hold the [PS/AS] button (2 sec.) to
start automatic station search.
To stop auto store, press other buttons
having radio functions.
Notes:
1. After auto store, the previous stored
stations will be overwritten.
2. The unit has 4 bands, such as FM1, FM2,
FM3 and AM. FM3 and AM can store
by AS function. Each bands can store 6
stations, CZ101A can store 24 stations in
total.
Manual store
When one expected radio station has been
detected, press and hold number button 1~6
to store it in the memory.
Recall the stored stations
Press one numeric button among 1 to 6 on
the panel to select the corresponding stored
station.
Local seeking
When LOCAL seeking is on, only those radio
stations with strong radio signal could be
received.
To open or close LOCAL function, press
and hold the [D] button on the front panel,
then press [ ] button repeatedly until
LO or DX displays on the screen, rotate the
[VOLUME] knob to select Local or Distant
mode.
Note:
The number of radio stations that can be
received will decrease after the local seeking
mode is on.
CMU1521194D(CZ101A) manual.indb 10 2010-8-20 9:54:28

English
11
byte alphabetical letters and numerals
(including an extension).
3. Do not afx a name to a le inside a folder
having the same name.
Folder structure
A disc with a folder having more than 8
hierarchical levels will be impossible.
Number of les or folders
1. Up to 999 files can be recognized per
folder.
Up to 999 les can be played.
2. Tracks are played in the order that they
were recorded onto a disc. (Tracks may
not always be played in the order displayed
on the PC.)
3. Some noise may occur depending on
the type of encoder software used while
recording.
Eject function
Just pressing the [ ] button, ejects the disc.
Notes:
• If you force a CD into before auto
reloading, this can damage the CD.
• If a CD (12 cm) is left ejected for 15
seconds, the CD is automatically reloaded
(Auto reload).
Listening to a disc already loaded
in the unit
Press the [SRC / ] button to select the CD/
MP3/WMA mode.
When the unit enters the CD/MP3/WMA
mode, play starts automatically.
Loading a CD
Insert a CD into the center of the CD
SLOT with label facing up. The CD plays
automatically after loading.
Notes:
• Never insert foreign objects into the CD
SLOT.
• If the CD is not inserted easily, there may
be another CD in the mechanism or the
unit may require service.
This unit can play back MP3/WMA
les
Notes:
• If you play a WMA file with active DRM
(Digital Rights Management), no audio is
output.
To disable DRM
(Digital Rights Management)
When using Windows Media Player 9/10/11,
click on TOOL -> OPTIONS -> COPY MUSIC
tab, then under COPY SETTINGS, unclick
the Check box for COPY PROTECT MUSIC.
Then, reconstruct les.
Personally constructed WMA files are used
at your own responsibility.
Precautions when creating MP3/
WMA le
Usable sampling rates and bit rates
1. MP3: Sampling rate 8 kHz-48 kHz, Bit rate
8 kbps-320 kbps / VBR
2. WMA: Bit rate 8 kbps-320 kbps
File extensions
1. Always add a le extension “.MP3”, “.WMA”
to MP3, WMA file by using single byte
letters. If you add a file extension other
than specified or forget to add the file
extension, the le cannot be played.
2. Files without MP3/WMA data will not play.
The les will be played soundlessly if you
attempt to play files without MP3/WMA
data.
* When VBR les are played, the play time
display may differ the play location.
* When MP3/WMA les are played, a little
no sound part is caused between tunes.
Logical format (File system)
1. When writing MP3/WMA file on a CD-R
disc or CD-RW disc, please select
“ISO9660 level 1, 2 or JOLIET or ROMEO”
or APPLE ISO as the writing software
format. Normal play may not be possible if
the disc is recorded on another format.
2. The folder name and file name can be
displayed as the title during MP3/WMA
play but the title must be within 32 single
CD/MP3/WMA Operations
CMU1521194D(CZ101A) manual.indb 11 2010-8-20 9:54:28

12
English
CD/MP3/WMA Operations
• Discs without the or
TEXT
mark and
CD-ROMs cannot be played by this unit.
• Some CD-R/CD-RW discs may not be
usable.
Pausing play
1. Press the [ 4 ] button to pause play.
“PAUSE” appears in the display.
2. To resume CD play, press the [ 4 ] button
again.
Displaying CD titles
This unit can display title data for MP3/WMA
disc.
When SCROLL is OFF, each time you press
the [BAND] button to change the title display.
MP3/WMA disc
Track -> Folder -> File title -> Album -> Title
-> Artist -> Track ...
Notes:
• If MP3/WMA disc is not input TAG, “NO
TITLE” appears in the display.
• Only ASCII characters can be displayed in
Tags.
Selecting a track
Track-up
1. Press the [ ] button to move to the
beginning of the next track.
2. Each time you press the [ ] button, the
track advances to the beginning of the
next track.
3. For MP3/WMA disc, press and hold the
[6] button (2 sec.) to move ahead to +10
tracks.
Track-down
1. Press the [ ] button to move back to
the beginning of the current track.
2. Press the [ ] button twice to move back
to the beginning of the previous track.
3. For MP3/WMA disc, press and hold the [5]
button (2 sec.) to move back to -10 tracks.
Fast-forward/Fast-reverse
Fast-forward
Press and hold the [ ] button.
Fast-reverse
Press and hold the [ ] button.
* For MP3/WMA discs, it takes some time
until the start of searching and between
tracks. In addition, some error may occur in
the play time.
Folder Select
This function allows you to select a folder
containing MP3/WMA les and start playing
from the rst track in the folder.
1. Press the [ 5 ] or [ 6 ] button.
Press the [ 6 ] button to move the next
folder. Press the [ 5 ] button to move the
previous folder.
2. To select a track, press the [ ] or [ ]
button.
Top function
The top function resets the CD player to the
rst track of the disc. Press and hold the [ 4 ]
button (2 sec.) to play the rst track (track No.
1) on the disc.
* In case of MP3/WMA, the rst track of the
current folder will be played.
Other various play functions
Scan play
This function allows you to locate and play
the rst 10 seconds of all the tracks recorded
on a disc.
Press the [ 1 ] button to perform scan play.
Repeat play
This function allows you to play the current
track repeatedly or play a track currently
being played in the MP3/WMA folder
repeatedly.
CD:
1. Press the [ 2 ] button once or more until
“RPT ON” appears on the LCD to perform
repeat play.
CMU1521194D(CZ101A) manual.indb 12 2010-8-20 9:54:28

English
13
2. Press [ 2 ] button repeatedly until “RPT
OFF” appears on the LCD to cancel repeat
playback.
MP3/WMA:
1. Press the [ 2 ] button once or more until
“TRACK RPT” appears on the display to
perform repeat play, and “RPT” segment
lights on.
2. For MP3/WMA files, press [ 2 ] button
repeatedly until “FOLDER RPT” appears
on the display for folder repeat play.
CD/MP3/WMA Operations
3. Press [ 2 ] button repeatedly until “RPT
OFF” appears on the display to cancel
repeat playback, and “RPT” segment goes
o.
Random play
This function allows you to play all tracks
recorded on a disc in a random order.
Press the [ 3 ] button to perform random play.
Press [SRC / ] button on the panel or
remote control to select “AUX”.
AUX is just for Audio content with 3.5mm
Jack connector plugged into audio-in socket
on the front panel.
AUX Input sensitivity setting
1. Press and hold the [D] button (2 sec.).
2. Turn the [VOLUME] knob to select “AUX
SENS”.
3. If the output level of connected external
audio player is “HIGH”, rotate [VOLUME]
knob and choose “LOW”. And if the output
level is “LOW”,choose “HIGH”.
AUX Operations
CMU1521194D(CZ101A) manual.indb 13 2010-8-20 9:54:28

14
English
6. TROUBLE SHOOTING
GENERAL
Problem Cause Measure
Unit can not
power on
Unit fuse blown. Replace with new fuse of correct rating.
Car battery fuse blown. Replace with new fuse of correct rating.
Unit can not
power on
Nothing happens
when buttons are
pressed.
Display is not
accurate.
The microprocessor has
malfunctioned due to noise, etc.
Turn o the power and remove the DCP.
Press the [RESET] button with a thin rod.
Note:
When the [RESET] button is pressed, turn o
the ACC power.*
* When the [RESET] button is pressed,
frequencies of radio stations, titles, etc. stored
in memory are cleared.
Remote control
does not work
Battery depleted. Change the battery.
Battery installed incorrectly. Install the battery correctly.
No/low audio
output
Improper audio output connection. Check wiring and correct.
Volume set too low. Increase volume level.
Speakers damaged. Replace speakers.
Heavily biased volume balance. Adjust the channel balance to center position.
Speaker wiring is in contact with
metal part of car. Insulate all speaker wiring connections.
Poor sound quality
or distortion
Non-standard disc used. Use a standard disc.
Speaker power rating does not
match unit. Replace speakers.
Wrong connections. Check wiring and correct.
Speaker is shorted. Check wiring and correct.
Tel-Mute
malfunction MUTE wire is grounded. Check the MUTE wiring and correct.
Unit resets itself
when engine is o
Incorrect connection between
ACC and Battery. Check wiring and correct.
CMU1521194D(CZ101A) manual.indb 14 2010-8-20 9:54:28

English
15
7. ERROR DISPLAYS
DISC Player
Problem Cause Measure
Disc cannot be
loaded.
Another disc is already loaded. Eject the disc before loading the new
one.
There is an object install inside
the unit. Remove the object inside the unit.
Sound skips or is
noisy.
Compact disc is dirty. Clean the compact disc with a soft cloth.
Compact disc is heavily scratched
or warped.
Replace with a compact disc with no
scratches.
Sound is bad
when power is rst
turned on.
Condensation may form on the
internal lens when the car is
parked in a humid place. Let dry for about 1 hour with power on.
Display Cause Measure
ERROR 3 Disc is inserted incorrectly. Eject the disc then reload it properly.
The disc format is not supported. Try another disc.
ERROR 5 This is a failure of deck’s mechanism. Consult your store of purchase.
If an error occurs, one of the following displays is displayed.
Take the measures described below to solve the problem.
If an error display other than the ones described above appears, press the Reset button. If the
problem persists, turn off the power and consult your store of purchase.
* When the Reset button is pressed, frequencies of radio stations, titles, etc. stored in memory
are cleared.
CMU1521194D(CZ101A) manual.indb 15 2010-8-20 9:54:28

16
English
FM Tuner
Frequency range: 87.5-108.0MHz
Usable sensitivity: 8dBμ
Frequency response: 30Hz-15kHz
Stereo separation: 30dB(1kHz)
Signal/noise ratio: >55dB
AM Tuner
Frequency range: 531-1629kHz
Usable sensitivity (S/N=20dB): 30dBμ
CD Player
System: Disc digital audio system
Frequency response: 20Hz-20kHz
Signal/noise ratio: >94dB
Total harmonic distortion: Less than 0.1% (1kHz)
Channel separation: >60dB
MP3/WMA mode
MP3 sampling rate: 8 kHz to 48 kHz
MP3 bit rate: 8 kbps to 320 kbps / VBR
WMA bit rate: 8 kbps to 320 kbps
Logical format: ISO9660 level 1,2
Joliet or Romeo le system
Audio Amplier
Maximum power output:
180W (45W x 4)
Speaker impedance: 4 (4 to 8 allowable)
Input
Audio input sensitivity:
High: 320mV (at 1V output)
Mid: 650mV (at 1V output)
Low: 1.3V (at 1V output)
(input impedance 10 k or greater)
Aux-in level: ≤2V
General
Power supply voltage:
14.4VDC (10.8 to 15.6V allowable),
negative ground
Pre-Amp output voltage:
2.0V (CD play mode: 1kHz, 0dB, 10k load)
Fuse: 15A
8. SPECIFICATIONS
Dimensions of the Main Unit:
188mm Width × 58mm Height × 190mm Depth
Weight of the Main Unit: 1.30kg
Notes:
• Specifications and design are subject
to change without notice for further
improvement.
CMU1521194D(CZ101A) manual.indb 16 2010-8-20 9:54:28

English
17
9. INSTALLATION / WIRE
CONNECTION GUIDE
1) Before Starting
1. This set is exclusively for use in cars with a nega-
tive ground 12 V power supply.
2. Read these instructions carefully.
3. Be sure to disconnect the battery “terminal” before
starting. This is to prevent short circuits during
installation. (Figure 1)
2) Package Contents
3) General Cautions
1. Do not open the case. There are no
user serviceable parts inside. If you
drop anything into the unit during
installation, consult your dealer or an
authorized Clarion service center.
2. Use a soft, dry cloth to clean the case.
Never use a rough cloth, thinner,
benzine, or alcohol etc. For tough dirt,
apply a little cold or warm water to a
soft cloth and wipe off the dirt gently.
Source unit ..........................................1
Front panel ..........................................1
Trim ring ..............................................1
Mounting bracket.................................1
Screw M4x5 mm..................................1
Screws M5x6 mm................................4
L-key....................................................2
Wire connector ....................................1
Owner’s manual...................................1
Strap....................................................1
Special screw (Front panel lock) .........1
Car battery
Figure 1
CONTENTS
1) Before Starting ......................................................................17
2) Package Contents.................................................................17
3) General Cautions ..................................................................17
4) Cautions on Installation.........................................................18
5) Installing the Source Unit ......................................................18
6) Removing the Source Unit ....................................................20
7) Wiring and Connections........................................................21
8) Connecting the Accessories..................................................22
CMU1521194D(CZ101A) manual.indb 17 2010-8-20 9:54:28

18
English
4) Cautions on Installation
1. Prepare all articles necessary for
installing the source unit before
starting.
2. Install the unit within 30° of the hori-
zontal plane. (Figure 2)
3. If you have to do any work on the car
body, such as drilling holes, consult
your car dealer beforehand.
4. Use the enclosed screws for
installation.
Using other screws can cause
damage.
(Figure 3)
5) Installing the Source Unit
1. Place the mounting bracket into the instrument panel, use a screwdriver to bend
each stopper of the mounting bracket inward, then secure the stopper.
2. Wire as shown in Section 7) .
3. Insert the source unit into the mounting bracket until it locks.
4. Take care of the top and bottom of the trim ring and mount it so that all the hooks
are locked.
Notes:
1. Some car models require special mounting kits for proper installation.
Consult your Clarion dealer for details.
2. Fasten the front stopper securely to prevent the source unit from coming loose.
• Console opening dimensions
Max 30˚
Chassis Chassis
Damage
Max. 6 mm (M5 screw)
Figure 2 Figure 3
(182 mm)
53 mm
Hole
CMU1521194D(CZ101A) manual.indb 18 2010-8-20 9:54:28

English
19
Notes of installation
1. Before installation, please make sure
proper connections are conducted and
the unit operates normally. Improper
connection may result in damage to the
unit.
2. Use only accessories designed and
manufactured for this unit and other
unauthorized accessories may result in
damage to the unit.
3. Before installation, please fasten all power
cables.
4. DO NOT install the unit in the place where
close to hot area to prevent damage to
electrical components such as the laser
head.
5. Install the unit horizontally. Installing the
unit more than 30 degree vertically may
result in worse performance.
6. To prevent electric spark, connect the
positive pole rst and then the negative
pole.
7. DO NOT block the cooling fan exit to
ensure sufcient heating dissipation of this
unit, or it may result in damage to this unit.
Unit Installation
Method A
1. Insert mounting bracket into dash board,
choose appropriate mounting tab according
to the gap width, bending the mounting
tab outwards with a screwdriver to x the
mounting bracket in place.
2. Slide the unit into the bracket until you hear
a click sound.
Screwdriver
Stoppers
Hole Instrument panel
Screw (M4x5)
Strap
Mounting bracket
Spring
Stoppers
Note:
Before attaching the mounting bracket, slightly bend the
spring toward the inside with your ngers and attach it to
the side of car.
Trim ring
Source Unit
CMU1521194D(CZ101A) manual.indb 19 2010-8-20 9:54:29