Clarion CZ202 User manual

CZ202
ServiceManual
Published by Service Dept.
ClarionCo.,Ltd.
7-2,Shintoshin,Chuo-ku,Saitama-shi,Saitama330-0081Japan
ServiceDept.: 7-2,Shintoshin,Chuo-ku,Saitama-shi 330-0081Japan
Phone:[phone] Fax:[phone]-7132-00
Model
This product is a lead free model.
Please keep the following conditions when you repair.
1. Use lead free solder.
* Koki's lead free solder S3X-55M 0.6mm
(CLARION Parts No.642-0231-01)
* Koki's lead free solder S3X-55M 1.0mm
(CLARION Parts No.642-0231-02)
2. Use a nitrogen solder system.
3. Do not use "General solder" and "Lead free solder"
together.
NOTES
* This product includes technology owned by Microsoft Cor-
poration and cannot be used or distributed without a li-
cense from MSLGP.
* Specification and design are subject to change without no-
tice for further improvement.
*Copyright 2011 Clarion Company,Ltd. All rights reserved.
No portion of this manual can be reproduced in any way,
electronically or otherwise, without the express prior per-
mission of the copyright owner.
CD/USB/MP3/WMA RECEIVER
TX-1099B-A
Printed in P.R.C.
Oct.2011 FY

9、Assembly parts for CZ202
1
TABLE OF CONTENTS
3、Circuit block diagram
Product safety servicing guidelines for cd products
Serv cing precautionsi
1、Specifications
2、Wiring diagram
4、PCB layout drawing
5、Exploded view of general assembly
6、Troubleshooting
7、Error display
8、Current software version

2

3

4
1、Specifications

5
2、Wiring diagram
NOTE:
●Before installing,be sure to disconnect the negative cable of the car battery.
●In the optional devices,the RCA cables and the Connector cables are separately-sold items.

6
3、Circuit block diagram
3.1 Main board-Cricuit block diagram

7
3.2 Servo board-Circuit block diagram

8

3.3 Key board-Circuit Diagram
9

4、PCB layout drawing
4.1 Main board-PCB layout top view
10

4.2 Main board-PCB layout btttom view
11

4.3 Servo board-PCB layout top view
12

4.4 Servo board-PCB layout bottom view
13

4.5 Key board-PCB layout top view
14

4.6 Key board-PCB layout bottom view
15

5、Exploded view of general assembly
16

17

6、Troubleshooting
18

7、Error display
8、Current software version
MCU VERSION :IN TUNER MODE OR AUX MODE ,Operation press and hold ENT+M6 KEY.
SERVO VESRION :IN CD MODE, Operation press and hold ENT+M6 KEY