6
XBS
On/Off
Rotate the [VOLUME] knob to turn On
or
Off the
X-BASS bosster function.
SUB
On/Off
Rotate the [VOLUME] knob to select subwoofer
between ON and OFF
SUB LPF (SUB ON)
Rotate [VOLUME] knob to adjust the subwoofer
Low Pass Filter range: 80HZ/120HZ/160HZ
Radio Operation
Select Radio
as
Playing
Source
Press the [ SOURCE ] button to select the
RADIO mode.
Selecting
the
Radio
Band
Press the [ BANDI SEARCH ] button on the
front panel to select one Radio band among
F1
,
F2, F3, AM.
[
~]
Tuning
Up
I [
~]
Tuning
Down
Buttons
1. Press the [
~
] I [
~
] button to seek to
the next strongest station.
2. Press and hold the [
~
] I [
~
] button
change intervals step by step.
Preset Scan
Preset scan receives the stations stored
in
preset
memory in order. This function is useful when
searching for a desired station
in
memory.
1. Press the [AS/PS] button.
2. When a desired station is tuned in, press the
[AS/PS] button again to continue receiving
that station.
Auto
Store
Only stations with sufficient signal strength will
be detected and stored
in
the memory.
Press and hold the [AS/PS] button to start
automatically select six strong stations and store
them into six presets. The new stations replace
any stations already stored in the band.
FZ105
SUB GAIN (SUB ON)
Rotate the [VOLUME] knob to adjust the
subwoofer gain range: 0 to 12
BAL
(Balance)
Rotate the [VOLUME] knob to adjust the
balance between the right and left speakers
from 1
OR
(full right) to 1
OL
(full left).
FAD (Fader)
Rotate the [VOLUME] knob to adjust the fader
between the front and rear speakers from
1
OR
(full rear) to 1
OF
(full front).
Manual
Store
When one expected radio station has been
detected, press and hold number button 1-6 to
store it
in
the memory.
Recall
the
Stored
Stations
Press one numeric button among 1 to 6 on the
front panel to select the corresponding stored
stations.
Local
Seeking
When LOCAL seeking is ON, only those radio
stations with strong radio signal could be
received.
To
select LOCAL function, press the [ MENU ]
button on the front panel, then press the [ ..,... ]
I [
~
] button repeatedly until LO
or
DX display
on the LCD, rotate the [VOLUME] knob to select
local or distant mode.
Area
Set
This option allows you to select the appropriate
frequency spacing for your area.
1.
Press the [MENU] button.
2.
Press the
[11+111+111]
button to select
AREA
"
3.
Rotate the [VOLUME] knob to select:
"U.S.A", "LATIN","EUROPE", "ASIA"
4.
Press the [MUTE] button to confirm.
USB
and
SD Mode Operation
Insert
the
USB
device
1.
Slide the USB socket cover
usn
to left.
2.
Insert the USB device into the USB socket.
Press the [SOURCE] button to select USBI
IPOD mode to start playing.
3.
To
remove the USB device, you should first
select another source or turn off the power,
in
order to avoid damaging the USB device.
Then take off the USB
device·.
ll@qtLeaJjl·~C
~>·~
II.
t I
' .
~
#
~
.
·---
Insert
the
SO
Card
1.
Press the [OPEN] button to unlock the front
panel.
2.
Hold the ieft hand side ofthe panel & pull
forward to disengage it from the chassis.
3.
Insert the SD Card into the slot with label
facing left until a "CLICK" sounds is heard.
4.
Replace the front panel and press the
[SOURCE] button to select SD mode to start
playing.
Selecting
aTrack
1.
Press the [ ..,... ] button to advance to the
next track/song.
Press the [ ...,.. ] button to go to previous
track/song.
AUXMode Operation
2.
Press and Hold in the [ ..,... ] button to fast
forward through the track/song.
Press and Hold in the [ ...,.. ] button to fast
backward through the track/song.
Play I Pause
Press the [ ..... ] button to pause the track/song
that is currently playing.
Press the [ ..... ] button to resume playing the
track/song that has been paused.
Folder
Select
This function allows you to select a folder
containing MP3/WMA files and start playing
from the first track in the folder.
Press the [
~
5 I • 6 ] button to select a folder.
Sea~h
Function
1.
Press the [ BANDI SEARCH ] button on
front panel access the MP3I WMA file
search mode.
2.
Rotate the
[VOLUME
] knob to search
through all folders on the device then press
[
<!>
I MUTE ] to make your selection.
3.
Rotate the
[VOLUME
] knob to select the
desired track within the previously selected
folder and press [
<!>
I MUTE ] to start playing.
Display
Function
During playback, pressing the [ INFO ] button
will automatically cycle through the following
information on the file being played on the LCD:
FOLDER NAME->FILE NAME·>TITLE·>
ARTIST->
ALBUM
Top
function
The top function resets the USD and SD player to
the first track of the device. Press the
[1
] button
(long press) to play the first track (track No.
1)
on the
USB
or
SD mode.
Press the
[SOURCE]
button on the front panel
to select "AUXIN".
AUXIN
is just for audio content with 3.5mm
~-audloplayar,
I
Jack connector plugged into audio-in socket on
~
11-;..
-l
""'··
the front panel. 0 . .
~
-J
[llto]tdh=:lx:-~~---~-
~
3.5nvn~(oollncluded)
AUXV'