Clarity Alto PLUS User manual

Basic Installation
Step 1: Install the backup batteries (optional) by removing the battery cover as shown in
Figure 1.
Step 2: Pull the ends of the phone cord to untable the cord; connect the loose end of the
phone cord into your wall telephone outlet
Step 3: Place handset in cradle
Step 4: Pull the ends of the power cord apart to untangle the cord; plug the adapter into
your wall’s electrical outlet
IMPORTANT: Use only with Class (Classe) 2 power source, provided with your
product
Step 5: If you hear a dial tone, your telephone is ready
for use If not, check all connections again
ALTOPLUS QUICK START GUIDE
four AA alkaline backup batteries (not included)
The phone operates as a regular phone if there is no power or backup batteries In this case, the
We recommend installing batteries if you live in an area with frequent power outages
Figure 1
Figure 2

Wall Mount Installation
Step 1: Pull the handset hook out of the base and reverse its position so that the hook points up
and will hold the handset when you hang up (See Figure 1)
Step 2: Pull the ends of the phone cord to untangle the cord; run the cord through the groove on
the back of the phone Insert the tabs of the mounting bracket into the slots in the back
of the phone (See
Figure 2)
Step 3:
keyhole slots with the wall plate studs and slide the base of the phone downward to secure
it on the wall (See Figure 3)
ALTOPLUS QUICK START GUIDE
Figure 1
Figure 2 Figure 3
M1
M2
M3
M6
M7
M8
F
R
P
M
REDIAL
FLASH
PAUSE
M1
M2
M3
F
R
P
M
REDIAL
FLASH
PAUSE