Clark Heintz Tools & Equipment DX192100SL User manual

STEP 1:
LAY BACK PANEL FLAT ON PACKING MATERIAL OR BLANKET.

ATTACH USING M4 SCREWS
STEP 2:
POSITION 1 SIDE PANEL ASSEMBLY PERPENDICULAR TO THE BACK PANEL.
ASSEMBLE PARTS USING (8) M4 SCREWS.

GUSSET
SLOTS ON BOTH ENDS
OF TOP/BTM PANEL.
STEP 3:
SLIDE A TOP/BOTTOM PANEL THROUGH ITS SLOT ON TO THE GUSSET OF THE SIDE PANEL.

M4 SCREWSM4 SCREWSM4 SCREWSM4 SCREWS
STEP 4:
SECURE TOP/BOTTOM PANEL USING (4) M4 SCREWS

INSTALL USING
(4) M4 X 10 mm
SCREWS.
STEP 5:
REPEAT STEP 4 TO ADD THE OTHER TOP/BOTTOM PANEL.

STEP 6:
ADD THE OTHER SIDE PANEL ASSEMBLY BY INSERTING THE ATTACHED GUSSETS THROUGH THE
SLOTS OF THE TOP AND BOTTOM PANELS AND SECURE WITH M4 SCREWS
INSTALL M4 SCREWS

USE (8) M5 X 10 mm SCREWS TO SECURE ALL 4 GUSSETS TO
TOP/BOTTOM PANELS. (2) SCREWS PER GUSSET.

SUPPORT MOUNTING
BRACKET
STEP 8:
SET ASSEMBLED BODY ON THE FLOOR
. •
ATTACH MOUNTING/SUPPORT BRACKET ON THE •
BOTTOM SUPPORT CHANNEL OF THE ROLLER CABINET
WITH (2) M10 X 25 BOLT & WASHERS.
(2) M10 X 25 BOLTS & WASHERS
SLOTS ON BOTTOM OF UNIT
M10 X 25 BOLTS & WASHERS
SUPPORT BRACKET
CAUTION: APPLY BRAKES ON CASTERS BEFORE BEGINNING THIS STEP!!!

M8 SCREWSM8 SCREWSM8 SCREWSM8 SCREWS
STEP 9:
POSITION LOCKER BODY ON TO THE SUPPORT BRACKET MAKING SURE THAT THE (2) TABS
OF THE SUPPORT BRACKET ARE ENGAGED IN THE (2) OPENINGS AT THE BOTTOM OF
THE LOCKER BODY. SECURE LOCKER BODY TO THE HUTCH AND ROLLER CABINET
WITH (4) M8 SCREWS.
SIDE LOCKER IS HEAVY! AND REQUIRES ASSISTANCE TO LIFT
AND POSITION ON BRACKET.
TABS OF SUPPORT BRACKET
OPENINGS ON LOCKER BOTTOM

DETAIL J
SCALE 1 : 4
STEP 11:
WITH THE HELP OF ANOTHER PERSON, ATTACH THE DOOR USING (11) M4 FLAT-HEAD SCREWS.