Clarke LB5S Instruction Manual

OPERATION & MAINTENANCE
INSTRUCTIONS
LS0811
STAND FOR LOGBUSTER 5
MODEL NO: LB5S
PART NO: 3402045
LB5S Log Buster Stand.fm Page 1 Wednesday, August 31, 2011 9:26 AM

2
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
LB5S Log Buster Stand.fm Page 2 Wednesday, August 31, 2011 9:26 AM

3
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
INTRODUCTION
Thank you for purchasing this CLARKE Log Buster Stand.
Before attempting to use this product, please read this manual thoroughly and
follow the instructions carefully. In doing so you will ensure the safety of yourself
and that of others around you, and you can look forward to your purchase
giving you long and satisfactory service.
GUARANTEE
This product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Please keep your receipt which will be
required as proof of purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.
Faulty goods should be returned to their place of purchase, no product can
be returned to us without prior permission.
This guarantee does not effect your statutory rights.
SPECIFICATIONS
Model Number: LB5S
Part Number: 3402045
Dimensions (Stand only): 855 x 725 x 735 mm
Net Weight: 6.1 kg
LB5S Log Buster Stand.fm Page 3 Wednesday, August 31, 2011 9:26 AM

4
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
PART IDENTIFICATION
UNPACKING
The following items should be supplied in the carton. If any parts are missing or
damaged, please consult your Clarke dealer where you purchased the stand.
1 1 x Wheel support beam LGLB5S01
2 1 x Cross beam LGLB5S02
3 2 x Vertical support column LGLB5S03
4 1 x Vertical support column with bracket (front) LGLB5S04
5 2 x Motor support brackets - left and right hand LGLB5S05
6 1 x Motor support cross-member LGLB5S06
7 1 x Alternative wheel mount / pump cover
assembly
LGLB5S07
8 1 x Fixings pack LGLB5S08
LB5S Log Buster Stand.fm Page 4 Wednesday, August 31, 2011 9:26 AM

5
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
ASSEMBLY
PREPARING THE LOG BUSTER
1. Remove the 4 nuts that secure the
front foot of the log buster and
remove the foot.
2. Remove the wheel hub using a flat
screwdriver.
3. Remove the circlip and the wheel.
• The wheels, circlips and hubs will
be attached to the log buster
frame later.
4. You will now need to replace the
wheel mount / pump cover
assembly. To do this, remove the
safety handle from the log buster,
and the nut next to it (shown on the
right).
5. Remove any other nut/bolts that
are securing the wheel mount /
pump cover assembly to the log
buster.
6. Remove the wheel mount / pump
cover assembly and replace it with
the one supplied.
7. Refit the safety handle and nut
removed in step 4.
LB5S Log Buster Stand.fm Page 5 Wednesday, August 31, 2011 9:26 AM

6
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
8. Assemble the motor support
brackets as shown.
9. Fix the motor support bracket to the
wheel mount / pump cover
assembly.
FRAME ASSEMBLY
1. Assemble the frame as shown.
2. Attach the wheels you removed
from the log buster to the log buster
stand.
3. Fix the vertical support columns to
the bracket as shown.
LB5S Log Buster Stand.fm Page 6 Wednesday, August 31, 2011 9:26 AM

7
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
4. Secure the front vertical support
column to the log buster using the
four fixings originally used to secure
the foot.
THE FINISHED LOG BUSTER WITH STAND
MOVING THE LOG BUSTER
Lift the log buster by the front handle before moving it.
LB5S Log Buster Stand.fm Page 7 Wednesday, August 31, 2011 9:26 AM

LB5S Log Buster Stand.fm Page 8 Wednesday, August 31, 2011 9:26 AM