Claypaky C61505 User manual

1
SCENIUS PROFILE
C61505
IN TRUCTION MANUAL
ENGLI H
Congratulations on choosing a Clay Paky product!
We thank you for your custom.
Please note that this product, as all the others in the rich Clay
Paky range, has been designed and made with total quality to
ensure excellent performance and best meet your expectations
and requirements.
INDEX
Page Contents
2 Safety information
3 Unpacking and preparation
4 Installation and start-up
5 Control panel
7 Maintenance
19 Technical information
PRELIMINARY

AFETY INFORMATION
2
SCENIUS PROFILE
EN
IT
DE
E
FR
RU
SAFETY INSTRUCTIONS
IMPORTANT: Clay Paky recommends you carefully read and keep the safety information on this product, also
available in digital format at the following link:
http://www.claypa y.it/en
Ref: [FIS00L – Safety Information Scenius]
INFORMAZIONI DI SICUREZZA
IMPORTANTE: Clay Paky raccomanda di leggere accuratamente e conservare le informazioni di sicurezza relative
a questo prodotto, sempre reperibili in versione digitale al seguente link:
http://www.claypaky.it/en/download
Rif: [FIS00L – Safety Information Scenius]
INFORMATIONEN ZUR SICHERHEIT
WICHTIG: Clay Paky empfiehlt, die Sicherheitsinformationen bezüglich dieses Produkts genau zu lesen und
aufzubewahren. Sie sind in Digitalversion immer unter folgendem Link auffindbar:
http://www.claypaky.it/en/download
Ref: [FIS00L – Safety Information Scenius]
INFORMACIONES DE SEGURIDAD
IMPORTANTE: Clay Paky recomienda leer detenidamente y conservar la información de seguridad relativa a este
producto. Además, está disponible una versión digital de la misma en el siguiente enlace:
http://www.claypaky.it/en/download
Ref: [FIS00L – Safety Information Scenius]
CONSIGNES DE SÉCURITÉ
IMPORTANT: Clay Paky recommande de lire attentivement et de conserver les informations de sécurité relatives
à ce produit, disponibles en version digitale au lien suivant:
http://www.claypaky.it/en/download
Réf. : [FIS00L – Safety Information Scenius]
ИНСТРУКЦИЮ ПО ТЕХНИКЕ БЕЗОПАСНОСТИ
ВАЖНО: Clay Paky рекомендует внимательно прочитать и со ранить инструкцию по те нике безопасности
данного изделия, которая всегда доступна в электронном формате по следующей ссылке:
http:// .claypaky.it/en/do nload
Наименование: [FIS00L – Safety Information Scenius]

3
SCENIUS PROFILE
UNPACKING AND PREPARATION
2 x 183102/805
LAM00D
(fitted into fixture)
1
90°
90°
90°
90°
LOCKED
UNLOCKED
PAN Mechanism Lock and Release (every 90°) - Fig. 2
TILT Mechanism Lock and Release (every 45°) - Fig. 3
2 3
Packing contents - Fig. 1
45° 45°
45°
45°
45°
UNLOCKED
LOCKED

4
SCENIUS PROFILE
4
2
1
1
2
3
5
IN TALLATION AND TART-UP
Connecting and disconnecting power cable - Fig. 5
Installing the projector - Fig. 4
The projector can be installed on the floor resting on special rubber feet, on a truss or on the ceiling or wall.
WARNING: with the exception of when the projector i po itioned on the floor, the afety cable mu t be fitted. (Cod. 105041/003 available on reque t).
Thi mu t be ecurely fixed to the upport tructure of the projector and then connected to the fixing point at the centre of the ba e.

5
SCENIUS PROFILE
witching on the projector - Fig. 8
Press the switch. The projector starts resetting the effects. At the same time, the following information scrolls on the display:
Model Firmware xxx (Fixture ID) ystem errors
CENIU Version X.X.X Dmx Address xxx E: .........................
Date - Hour W: .........................
On conclusion of resetting in case of absence of the dmx signal, Pan and Tilt move to the “Home” position (Pan 128 bit - Tilt 128 bit). The control
panel (Fig. 8) has a display and buttons for the complete programming and management of the projector menu. The display can be in one of two
conditions: rest status and setting status. When it is in the rest status, the display shows the projector’s DMX address and the Fixture ID address
(if set).
During menu setting status, after a wait time (about 30 seconds) without any key having been pressed, the display automatically returns to rest status.
It should be noted than when this condition occurs, any possible value that has been modified but not yet confirmed with the
F
key will be cancelled.
CONTROL PANEL
1
2
Dmx Address
Warning Message
Fixture ID
8
Connecting to the control signal line (DMX) - Fig. 7
Use a cable conforming to specifications EIA RS-485: 2-pole twisted, shielded, 120Ohm characteristic impedance, 22-24 AWG, low capacity. Do not use
microphone cable or other cable with characteristics differing from those specified. The end connections must be made using XLR type 5-pin male/female
connectors. A terminating plug must be inserted into the last projector with a resistance of 120Ohm (minimum 1/4 W) between terminals 2 and 3.
IMPORTANT: The wires must not make contact with each other or with the metal casing of the connectors. The casing itself must be connected to the
shield braid and to pin 1 of the connectors.
Connecting to the mains supply - Fig. 6
SIGNAL
SCREEN
DMX 512
5 PIN
1
2
3
4
5
SIGNAL
Mains
6
7
Continue ➔

SCENIUS PROFILE
6
28
28
Reversal of the display - Fig. 9
To activate this function, press UP
B
and DOWN
C
keys simultaneously while the display is in the rest mode. This status will be memorised and
maintained even for the next time it will be switched on. To return to the initial state, repeat the operation all over again.
etting the projector starting address
On each projector, the starting address must be set for the control signal (addresses from 1 to 512).
The address can also be set with the projector switched off.
etting the projector Fixture ID
On each projector, the Fixture ID address must be set for an easy identification of the fixtures in an installation (ID from 1 to 255).
The Fixture ID address can be set with the projector switched off.
9
Functions of the buttons - Using the menu
etting addresses and options with the projector disconnected
The projector’s DMX address, as well as other possible operating options, can also be set when the appliance is disconnected from the electricity supply.
All that is needed is to press
F
to momentarily activate the display and thus access the settings. Once the required operations have been carried out,
the display will switch off again after a wait time of 30 seconds.
U ING THE MENU:
1) Press
F
once – “Main Menu” appears on the display.
2) Use the UP
B
and DOWN
C
keys to select the menu to be used:
• Setup (Setup Menu): To set the setting options.
• Option (Option Menu): To set the operating options
• Informations (Informations Menu): To read the counters, software version and other information.
• Manual Control (Manual control Menu): To trigger the test and manual control functions.
• Test (Test Menu): To check the proper functionning of effects
• Advanced (Advanced Menu): Access to the "Advanced menu" is recommended for a trained technical personnel.
To enable the "Advanced" see pag.16.
3) Press
F
to display the first item in the selected menu.
4) Use the UP
B
and DOWN
C
keys to select the MENU items.
Confirms the displayed value, or activates the displayed function, or enters the successive
menu.
Decreases the value displayed (with auto-repetitions) or passes to the next item in the menu.
Increases the value displayed (with auto-repetitions) or passes to the previous item in a menu.
Return to the top level
Commute from units, tens, hundreds, in the "Address", "Fixture ID" and "Calibration" menù.
F
C
DOWN
B
UP
D
LEFT
E
RIGHT

7
SCENIUS PROFILE
Locking and releasing Pan and Tilt movements - Refer to the instructions in the UNPACKING AND PREPARATION section.
Opening the head covers - Fig. 10.
Closing the head covers - Fig. 11.
1/4 Turn
1/4 Turn
1
21
2
1/4 Turn
2
1
CLICK!!
10 11
MAINTENANCE
Continue ➔

Upper Side
Upper Side
8
SCENIUS PROFILE
12
Periodical cleaning - Fig. 12
To ensure optimal operation and performance for a long time it is essential to periodically clean the parts subject to dust and grease deposits. The
frequency with which the following operations are to be carried out depends on various factors, such as the amount of the effects and the quality of the
working environment (air humidity, presence of dust, salinity, etc.).
Use a soft cloth dampened with any detergent liquid for cleaning glass to remove the dirt from the reflectors, from the lenses and filters. It is recommended
that the projector undergoes an annual service by a qualified technician for special maintenance involving at least the following operations:
•General cleaning of internal parts.
•Restoring lubrication of all parts subject to friction, using lubricants specifically supplied by Clay Paky.
•General visual check of the internal components, cabling, mechanical parts, etc.
•Electrical, photometric and functional checks; eventual repairs.
NOTE: keep a careful cleaning of the ''CMY/colour filters assembly'' to prevent rapid deterioration.

9
SCENIUS PROFILE
1
4
3
2
13
Cleaning of the filters - Fig. 13.
Continue ➔

10
SCENIUS PROFILE
1
2
1
2
1
2
Upper Side
Lower Side
Upper Side
14
Extraction of the effect modules: Preliminary operations - Fig. 14.

11
SCENIUS PROFILE
2
34
1
Upper Side
15
Extraction of the effect modules: Preliminary operations - Fig. 15.
Continue ➔

12
SCENIUS PROFILE
1
2
Upper Side
16
Extraction of the effect modules - Fig. 16.
IMPORTANT: Grasp the modules using the support structure and not the details which could get damaged.
Insertion of the effect modules: Repeat the operations indicated in Fig. 14, 15, 16, 17 and 18 in reverse order.

13
SCENIUS PROFILE
1
2
Upper Side
17
Extraction of the effect modules - Fig. 17.
IMPORTANT: Grasp the modules using the support structure and not the details which could get damaged.
Insertion of the effect modules: Repeat the operations indicated in Fig. 14, 15, 16, 17 and 18 in reverse order.
Continue ➔

14
SCENIUS PROFILE
Upper Side
1
Lower Side
Lower Side
3
2
18
Extraction of the effect modules - Fig. 18.
IMPORTANT: Grasp the modules using the support structure and not the details which could get damaged.
Insertion of the effect modules: Repeat the operations indicated in Fig. 14, 15, 16, 17 and 18 in reverse order.

15
SCENIUS PROFILE
Upper Side
Lower Side
2
A
1
A
3
A
Upper Side
Lower Side
20
21
2
1
19
Lamp change - Fig 20
Take the new lamp out of its package and insert in the fitting.
WARNING: do not touch the lamp’ envelope with bare hand .
Should thi happen, clean the bulb with a cloth oaked in alcohol
and dry it with a clean, dry cloth.
CAUTION: Fast lamp ON-OFF cycles (for example 10 minutes ON /
10 minutes OFF) will reduce the lamp life.
Lamp regulation - Fig. 21
To centre the lamp, turn the three adjusting screws as shown in the figure.
Opening and closing lamp compartment - Fig. 19
HOT SPOT
Continue ➔

16
SCENIUS PROFILE
1
2
GOBO ROTATION
GOD00E/001
GOD00E/002
GOD00E/013
GOD00E/014
GOD00E/005
GOD00E/010
INDEX
23
Replacing rotating gobos (ø 32.8 mm - max 23 mm image – thickness 1.1 mm) - Fig. 23
- Before use custom gobos contact Clay Paky;
- The original gobos have a special coating designed specifically to resist to the high temperatures;
- The rotating gobo wheel only use dichroic glass gobos (it is not possible to use metal gobos);
- For more information contact Clay Paky;
Bearing group replacement - Fig. 22
22

17
SCENIUS PROFILE
GOD00F/001
GOD00F/002
GOD00F/003
GOD00F/004 GOD00F/005
GOD00F/006
GOD00F/007
GOD00F/009
2
1
24
Continue ➔
Replacing fixed gobos (ø 31.5 mm - max 23 mm image - thickness 1.1 mm) - Fig. 24
IMPORTANT: Please contact CLAY PAKY before using customized gobos.

18
SCENIUS PROFILE
Battery removal - Fig. 25
This product contains a rechargeable lithium iron tetraphosphate battery. To preserve the environment, please dispose the battery at the end
of its life according to the regulation in force.
9
1
2
5
3
4
6
7
8
LiFePO4
25

19
SCENIUS PROFILE
TECHNICAL INFORMATION
410
(16.14")
360
(14.17")
486
(19.13")
760
(29.92")
565
(22.24")
584
(22.99")
645
(25.39")
Power upplie
200/240V 50/60 Hz
Light source
amp OSRAM ok-it 1400-PS
• Color Temperature: 6.000 K
• ife: 750 hrs
• Very high CRI
• uminoux flux: 120000 lm
• Base PGJ28 ok-it!
Motors:
28 stepper motors, operating with microsteps,
totally microprocessor controlled.
Channels:
37 control channels – 41 Vector
Inputs:
• DMX 512
• Ethernet
Moving body
Automatic repositioning of PAN and TI T after
accidental movement not controlled by control unit.
• PAN:
Angle Rotation: 540°
Resolution TI T: 2.117647°
Resolution TI T FINE: 0.00824°
Accuracy:
Resolution ± 0.1 (Range 0.2°)
• TI T
Angle Rotation: 268°
Resolution TI T: 1.5098°
Resolution TI T FINE: 0.004098°
Accuracy:
Resolution ± 0.1° (Range 0.2°)
Weight
40.7 Kg (88.18 lbs)
Dimen ion
• ( x W x H): 410 x 442 x 760 mm
• ( x W x H): 16.14 x 17.4 x 29.92 inches
IP rating
• IP20
• Protected against the entry of solid bodies
larger than 12mm (0.47”).
• No protection against the entry of liquids.
Safety device
• Bipolar circuit breaker with thermal protection.
• Automatic break in power supply in case of
overheating or failed operation of cooling
system.
Cooling
Forced ventilation with fans and heat sink.
Body
Aluminum and steel structure with plastic covers.
Working Position:
• Any Working Position
• Hanging system: with fast-lock omega clamps
(1/4 turn) on the base.
Effects Section:
• Very precise 0-100% dimmer
• CMY System + inear CTO
• Fast stop/strobe effect
• N°1 Colour Wheel with 7 color filter
• N° 1 Wheels with 6 rotating gobo (image ø26 mm)
• N° 1 Gobo Fix Wheel (Interchangeable)
• N° 1 16 fast Iris (16 blades)
• N° 2 linear Frost (light and heavy)
• N° 1 Rotating Prism with 4 faces
• 8° - 50° Optical Zoom
(Diameter front lens ø142 mm)
Control and programming:
• 37 or 41 DMX 512 control channels
• DMX protocol signal: USITT DMX 512
• Display: CD 128 x 64 bit, backlit ED, white
on black
• Pan and Tilt Resolution: 16 bit
• Focus Indexing Resolution: 16 bit
• Dimmer Resolution: 16 bit
• Rotation gobo Resolution: 16 bit
• Movement control: vectorial
• DMX signal connection: 5 pole X R input and
output
• Software upload through DMX input / Ethernet
input
Electronics:
• ong life self-charging buffer battery.
• Function reset from control unit
• ON/OFF lamp control from the lighting desk.
• Function reset from the lighting desk.
• "AUTOTEST" function from menu.
• ARTNET
• Electronic monitoring with status error.
• Cooling system monitoring.
• DMX level monitoring on all channels.
• Internal data transmission diagnostics.
• Firmware Upgrade with no power.
• Firmware upload from another fixture.

CLAY PAKY .p.A. - Via Pastrengo, 3/b - 24068 Seriate (BG) Italy - Tel. [phone] - Fax [phone] - www.claypaky.it
IST00X/001 – EN - PRELIMINARY 03/2016