Clear Force CF1400HD User manual

Model CF1400HD
CLEARFORCE
ELECTRIC POWERED
PRESSURE WASHER
OPERATING MANUAL
Our Customer Service staff is ready to provide assistance. In the case of a damaged
or missing part, most replacement parts ship from our facility.
For immediate help with assembly, or for additional product information,
vist www.ForceToolsUSA.com or
email [e-mail]
You will need this manual for safety instructions, operating procedures, and
Warranty. The original sales invoice is Warranty. The original sales invoice is required
for warranty service.
Electric Powered
High Pressure Washer
Version 3
QUESTIONS?
SAVE THIS MANUAL FOR REFERENCE

1
TaBLE OF CONTENTS
Important safety instructions 1
Safety features 4
Parts and diagram list 6
Assembly and operation instructions 7
Using the accessories 10
Working with detergents 10
Taking a break 12
Shutting down and cleaning up 12
Winterizing and long-term storage 13
Cleaning and maintenance 14
Troubleshooting 15
Technical specications 18
Warranty 19
Please read all of the safety precautions before operating this machine every time.
Please pay particular attention to all sections with following symbols.
Warning
Could cause injury or death if not followed
CaUTiOn
Could damage machine if not followed
Warning
When using this product, basic precautions should always be
followed, including:
1. Read all instructions before using the product.
2. To reduce the risk of injury, do not operate the machine near children.
3. Learn how to stop this product and release pressure quickly. Be thoroughly familiar
CF1400 Operating Manual
IMpOrTaNT SaFETY INSTrUCTIONS

2
with the controls.
4. Stay alert - watch what you are doing.
5. Do not operate this product when fatigued or under the inuence of alcohol or drugs.
6. Keep operating area clear of all people and pets.
7. Do not stand on unstable surfaces. Do not overreach or stand on unstable support.
Keep good footing and balance at all times.
8. Follow the maintenance instructions specied in the manual.
9. This product is provided with a Ground Fault Circuit Interrupter (GFCI) built into
the power cord. If replacement of the plug or cord is needed, use only identical
replacement parts.
10. This product or its power cord contains lead, a chemical known to cause cancer, birth
defects or other reproductive harm. Wash hands after handling.
Warning
Risk of injury
Injection Hazard
• Equipment can cause serious injury if the spray penetrates the skin.
• Do not point the gun at anyone or any part of the body. In case of penetration,
seek medical aid immediately.
Warning
Risk of injury
Do Not direct discharge stream at self or other persons.
• High-pressure jet can be dangerous if misused.
• The jet must not be directed at persons, animals, electrical devices, or the unit
itself.
Warning
Risk of Explosion - Do not spray flammable liquids
• Do not use acids, alkaline, solvents or any ammable material in this product.
These products can cause physical injuries to the operator and irreversible
damage to the machine.
Warning
Risk of Electric Shock
• Inspect cord before using - do not use if cord is damaged.
• Keep all connections dry and off the ground.
• Do not touch plug with wet hands.
CaUTiOn
Gun Kick Back
• Hold with both hands.
• The trigger gun safety lock prevents the trigger from being engaged
accidentally.
•The safety feature DOES NOT lock trigger in the ON position.
IMpOrTaNT SaFETY INSTrUCTIONS

3
GENERAL SAFETY RULES
1. Never operate the machine without all components properly connected to the
machine (handle, gun/wand assembly, nozzle, etc.).
2. Never operate pressure washer with broken or missing parts. Check equipment
regularly and repair or replace worn or damaged parts immediately.
3. Never put hand or ngers over the nozzle or spray tip while operating the unit.
4. Never spray ammable liquids or use pressure washer in areas containing
combustible dust, liquids or vapors. An electric spark could cause an explosion.
5. Never leave the wand unattended while the machine is running or switched on.
6. Never disconnect the high pressure discharge hose from the machine while the
system is pressurized. To depressurize machine, turn power and water supply off,
then depress gun trigger 2-3 times.
7. Never cover the pressure washer during operation to allow free air cooling.
8. Always wear safety glasses or goggles when operating or performing maintenance.
9. Always move switch on unit to “OFF” position before connecting or disconnecting
cord to electrical outlets.
10. Always turn water supply “on” before turning pressure washer “on” unless draining
for storage. Running pump dry causes serious damage.
11. Always hold gun and wand rmly when starting and operating the machine.
12. Always follow detergent manufacturer’s label recommendations for proper use of
detergents. Always protect eyes, skin and respiratory system from detergent if used.
13. Always lock the trigger of spray gun in the safety position when not in use.
14. Do not use pressure that exceeds the operating pressure of any of the parts (hoses,
ttings, etc.) in the pressurized system. Never use with any other manufacturer’s
accessories or components.
15. Do not spray electrical apparatus and wiring or the machine itself.
16. Do not operate the pressure washer with the inlet water lter screen removed. Keep
lter clear of debris and sediment.
17. Discharge residual pressure by depressing the trigger until no more water comes out
of the nozzle.
18. Keep clear of nozzle. Never direct high pressure spray at any person, animal or self.
19. To minimize the amount of water getting into the pressure washer, the unit should be
placed as far as possible from the cleaning site during operation.
GROUND FAULT CIRCUIT INTERRUPTER PROTECTION
This pressure washer is provided with a Ground Fault Circuit Interrupter (GFCI) built into
the power supply cord. This device provides additional protection from the risk of electrical
shock. Should replacement of the plug or cord become necessary, use only identical
replacement parts that include GFCI protection. See Page 4 for testing procedure.
IMpOrTaNT SaFETY INSTrUCTIONS

4
Warning
Connect directly to outlet. Extension cords are not recommended, the use
of an extension cord will override the GFCI built into the plug of the power
supply cord resulting in the risk of electrical shock.
DOUBLE-INSULATION INSTRUCTION
In a double-insulation product, two systems of insulation are provided instead of
grounding. No grounding is provided on a double-insulated product, nor should
a means for grounding be added to the product.
Servicing a double-insulated product requires extreme care and knowledge of
the system, and should be done only by qualied service personnel. Replace-
ment parts of a double-insulated product must be identical to the parts they
replace. A double-insulated product is marked with the words “DOUBLE-INSU-
LATION” or “DOUBLE-INSULATED”. The symbol “ ” may also be marked on
the product.
SaVE THESE inSTrUCTiOnS
IMpOrTaNT SaFETY INSTrUCTIONS
SaFETY FEaTUrES
TOTAL STOP SYSTEM (TSS)
The pressure washer is equipped with a total stop system (TSS) that will sense when the
trigger on the gun is depressed or released. It will open the power circuit to the motor, and
cause the pressure washer motor to stop. The motor will start again when the trigger is
depressed.
Warning
The pressure washer is also equipped with a main power “ON/OFF” switch
located on the unit. It should always be moved to the “OFF” position
when the pressure washer is not being used to prevent possible injury or
damage.
Ground Fault Circuit
Interrupter Protection
This device provides additional protection
from the risk of electrical shock. Plug the
Ground Fault Circuit Interrupter (GFCI)
into a power outlet. Indicator should turn
red. TEST BEFORE EACH USE. Press
the “TEST” button. Red indicator should
disappear. Press “RESET” button again
for use. Do not use if above test fails.