Clear One XAP IR User manual

XAP®|IR
Remote Infrared Control System
The XAP IR Remote Infrared Remote Control System operates single
or combined XAP systems a single, infrared transmission remote
control, offering telephone dailing and volume controls.
CONFERENCING ACCESSORIES
DATA SHEET <
SIMPLIFIED REMOTE
CONTROL FOR
XAP PLATFORM
APPLICATIONS
Conference Rooms
Boardrooms
Distance Learning
Training Rooms
Courtrooms
Hotel Ballrooms
ADVANTAGES
Superior Audio Performance
+Operate the most advanced room audio system - the XAP product line.
+Using infrared transmission functions with single and combined unit systems of
XAP800, XAP 400 and PSR1212 products.
+Ready to us; no programming necessary.
+Feature-packed single unit; includes connect, disconnect, dail a telephone
number, redial, activate speed dail, hook flash, adjust volume and microphone
muting.
Save money
+Cost-effective alternative to expensive control devices.
+Easy to use; easy to install for any user
+Long battery life
Customization
+Program speed dails with phone numbers up to 40 digits long; assign each
phone number a 20-character name.
+Set the mute function to activate across multiple units.

# of remote devices Maximum Distance
>SPECIFICATIONS
CONFERENCING ACCESSORIES
DATA SHEET <
>CLEARONE LOCATIONS
Headquarters:
Salt Lake City, UT USA
5225 Wiley Post Way
Suite 500
Salt Lake City, UT 84116
Tel: [phone]
800-945-7730
Fax: [phone]
[email protected]
Latin America
Tel: [phone]
[email protected]
EMEA
Tel: [phone]
[email protected]
APAC
Tel: [phone]
[email protected]
© 2007 ClearOne Communications Inc. All rights reserved. Other product names may be trademarks of their respective owners. Information in this document subject to change without notice. 802-170-050 Revision 3.3
Transmitter
Dimensions (LxWxH)
8” x 2.125” x 1.19”
20.3 x 5.4 x 3 cm
Battery Type
2 AAA
Battery Life
Approximately 1 year
Receiver
Dimensions (LxWxH)
5” x 2.75” x 1”
12.7 x 7 x 2.54cm
Power
Powered by the XAP or PSR1212 unit
Cable Length
6’ (1.8m; includes RS-485
Phoenix connector
System
Range:
25-40 feet 97.5-12 meters) from transmitter to
receiver
Angle of Acceptance
90O-120O
Operating Temperature
32 to 122OF/0 to 50OC
Compliance Approvals
FCC, Industry Canada, and CE
Part Number
910-170-150 XAP IR REMOTE INFRARED
REMOTE CONTROL SYSTEM
You can connect the XAP IR receiver to a network of ClearOne Control Panels, which are
connected to one of the RS-485 ports on the rear of the ClearOne unit. The XAP IR is always
connected as the last device in the chain. The table indicates maximum cable runs using
category five twisted-pair cable when installing the IR receiver.
1 3,000 ft/914 meters
2 2,500 ft/762 meters
3 1,600 ft/488 meters
4 1,200 ft/366 meters
5 1,000 ft/305 meters
6 800 ft/244 meters