Falconeyes RC-3T User manual

E) FCC Warning Statement
F) Attention
Thank you for purchasing FalconEyes’ products.
For further details of our related products, please contact your
local distributor or visit our webpage at www.falconeyes.com.hk
Thank you.
Please read this manual carefully before using this product.
E-mail: [email protected]
Website: www.falconeyes.com.hk
FM1711_RC-3T_eng
1.Make sure the power is off aer use.
2.Since there can be high voltage inside the unit, Do NOT open or repair the
unit yourself. If there is any defect, please contact an experienced technician.
3.Keep the environment dry and venlated when using the product. Do not
leave or use the flash in humid or dusty environment.
4.Do NOT apply pressure to the product.
5.Read this manual carefully before using the product.
3
RC-3T Instruction Manual
Remote control capable for all
fixture with this LCD display
Changes or modificaons not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protecon against harmful interference in a
residenal installaon. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instrucons, may cause harmful interference to radio communicaons.
However, there is no guarantee that interference will not occur in a parcu-
lar installaon. If this equipment does cause harmful interference to radio or
television recepon, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separaon between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.

B) Panel Diagram
A) Product Overview C) Operating Instructions
12
D) Specifications:
Model no.：
Baery Capacity 390mAH / 3.7V
Remote distance 20 M
Frequency 2.4GHz
Size (LxWxH)
LCD Display Touch Screen
Weight
RC-3T
108 x 54 x 16 mm
76 g
Accessories Charger
RC-3T remote is equipped with a touch screen LCD display, and
equipped with a internal 2.4G an-jamming transmier which able to
control single or mulple fixtures at a same me. By seng the ID chan-
nels, user can set channels from 0-999.
User can adjust the channels on the fixtures to match with the remote
channels in order to remote control single or mulple units. Users can
also preset different groups of fixtures in different channels and adjust
the remote channels to control corresponding group of fixtures. User will
no longer need to adjust lighng one by one and this improved the
efficiency on different projects.
To start using, please switch on the power switch on the remote. User can use
the remote to adjust color temperature and output of the light. The ID display on
the remote must be same as the fixture you’d like to control. Below is further
steps for reference:
1, Adjusng ID
① Please push the displayed on the remote screen and you’ll find the
first le digit blinking. At this moment you can push and to adjust the
first digit.
② When pushing 2 mes you’ll find the 2nd digit blinking. At this
moment you can push and to adjust the first digit.
③ When pushing 3 mes you’ll find the 3rd digit blinking. At this moment
you can push and to adjust the first digit.
2, Adjusng Brightness
①.Push the displayed on the remote screen and you can see the % row is
blinking. At this moment you can push to increase the brightness and to
decrease the brightness.
3, Adjusng Color Temperature
①.Push the displayed on the remote screen and you can see the K row is
blinking. At this moment you can push to increase the color temperature
(Cold side) and to decrease the color temperature (Warm side).
13
14
1. Color temperature display
2. Output Display
3. Channels and ID (supporng DMX 512)
4. Increase
5. Baery indicator
6. Color Temperature adjustment
7. Brightness adjustment
8. Channels and ID
(supporng DMX 512) adjustment
9. Decrease
10. Power switch
11. Charging indicator
12. Charging port
13. USB charging wire
14. Charger
1
2
3
4
5
6
7
8
9
10
11
12