Clear HOTSPOT TO GO User manual

HOTSPOTTO GO
QUICK START GUIDE
STEP 1:
Power on your CLEAR Spot Voyager by pressing and
holding the power button (button on the left side
“PWR”) until you see 4G LED lights come on.
STEP 2:
When the 4G LED lights stop ashing, your CLEAR
Spot Voyager is ready to connect any wi--enabled
device. Connect your Spot to your PC or Mac device
using the Wi-Fi Network Name (SSID) and Wi-Fi
Default Password located on the back of your Spot.
On your computer, open the Wireless Network
Connection located at the bottom right-hand corner
of your computer screen. Select the Wi-Fi network
name of your device and enter the Wi-Fi password
when prompted. That’s it! You are now ready to start
browsing the web.
CHECK OUT OUR COVERAGE MAP @
www.clear.com/coverage

HOTSPOTTO GO
LOAN PERIOD ......................................................... 14 days
OVERDUE FINES ............................................. $5 per day
REPLACEMENT FEE .................................................... $45
Wireless Internet for on-the-go
Up to 6-hour battery life
Connect up to 8 wi--enabled
devices
Must be 18+
Must have a Sandusky Library card
in good standing
....................................................................
WHAT’S INCLUDED:
HOTSPOT device, Quick Start Guide, AC Power Adapter
and USB Cable.
....................................................................
114 West Adams Street, Sandusky, OH
419-625-3834 www.sandusky.lib.oh.us