ClearView KR356H User manual

KR356H DVB-S2 HD IRD User Manual
This device is manufactured under license from Dolby Laboratories. Dolby and
the double-D symbol are trademarks of Dolby Laboratories.

About This Manual
Intended Audience
This user manual has been written to help people who have to use, to integrate and to install
the product. Some chapters require some prerequisite knowledge in electronics and
especially in broadcast technologies and standards.
Disclaimer
No part of this document may be reproduced in any form without the written permission of
the copyright owner.
The contents of this document are subject to revision without notice due to continued
progress in methodology, design and manufacturing. DEXIN shall have no liability for any
error or damage of any kind resulting from the use of this document.
Copy Warning
This document includes some confidential information. Its usage is limited to the owners
of the product that it is relevant to. It cannot be copied, modified, or translated in another
language without prior written authorization from DEXIN.

DIRECTORY
Chapter 1 Product Outline................................................................................4
1.1 Outline......................................................................................................................4
1.2 Features....................................................................................................................4
1.3 Specifications............................................................................................................5
1.4 Principle Chart ..........................................................................................................6
1.5 Appearance and Description.......................................................................................6
1.6 System Connection Sample........................................................................................7
Chapter 2 Installation Guide.............................................................................8
2.1 Acquisition Check .....................................................................................................8
2.2 Installation Preparation ..............................................................................................8
2.3 Wire’s Connection...................................................................................................10
2.4 Signal Cable Connection..........................................................................................10
Chapter 3 Operation.......................................................................................13
3.1 LCD Menu Class Tree .............................................................................................13
3.2 General Setting........................................................................................................16
Chapter 4 Web-based NMS Management........................................................28
4.1 login.......................................................................................................................28
4.2 Operation................................................................................................................28
Chapter 5 Troubleshooting .............................................................................43

KR356H DVB-S2 HD IRD User Manual
4 / 43
Chapter 1 Product Outline
1.1 Outline
KR356H DVB-S2 HD IRD is DEXIN’s all-in-one device which integrates demodulation,
de-scrambler, re-mux and decoding in one case to convert RF signals into audio/video
(CVBS/YPbPr/HDMI/SDI) output.
It is a 1-U case which supports 2 tuner inputs to receive signal from satellite. The two CAMs/CIs
accompanied can descramble the programs input from encrypted RF, ASI and IP. The CAM
requires NO unsightly external power cords, cables, or additional remote control device.
Its pluggable structure design greatly facilitates the change of modules (demodulator or decoder) as
needed.
To meet customers’various requirements, KR356H is also equipped with ASI and IP input for
re-mux, and output with 2 ASI ports and IP port.
1.2 Features
⚫Demodulation + descrambler +re-mux+decoder modules in one box
⚫2 DVB- S/S2Tuner inputs
⚫1 ASI & 1 IP (UDP) input for re-mux
⚫One CAM can decrypt multiple programs from Tuners/ASI/IP
⚫One channel video output with various interface option (MPEG2/H.264)
⚫Dual stereo audio output, or one Dolby Digital/Dolby Digital Plus (5.1) channel output
⚫Support Dolby Digital/Dolby Digital Plus Decoding and passthrough
⚫IP (1 MPTS & 8 SPTS) over UDP and RTP/RTSP output; ASI out
⚫Support CC and Subtitle
⚫Support maximum 128 PID mapping per input
⚫Pluggable and changeable demodulator and decoder modules
⚫LCD display, Remote control and Firmware, web NMS management
⚫Updates via web

KR356H DVB-S2 HD IRD User Manual
5 / 43
1.3 Specifications
Input
2 x DVB-S/S2RF, F type
1×ASI input for re-mux, BNC interface
1xIP input for re-mux (UDP)
Demodulating Section
DVB-S
Input Frequency
950-2150MHz
Symbol rate
2-45Msps
Signal Strength
- 65- -25dBm
Constellation
1/2, 2/3, 3/4, 5/6, 7/8 QPSK
DVB-S2 (Version 1)
Input Frequency
950-2150MHz
Symbol rate
QPSK 1~45Mbauds;
8PSK 2~30Mbauds
Code rate
1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
Constellation
QPSK, 8PSK
DVB-S2 (Version 2)
Input Frequency
950-2150MHz
Code rate
1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
Constellation
QPSK, 8PSK, 16APSK, 32APSK
Symbol rate
QPSK 1~45 Msps; 8PSK1~45 Msps; 16APSK 1~45 Msps; 32APSK 1-32 Msps
Descrambling
CAM/CI Quantity
2
BISS Mode
Mode 1, Mode E (up to 120Mbps)
Output
IP Output
1*MPTS & 8*SPTS over UDP, RTP/RTSP.
100 Base-T Ethernet interface (unicast / multicast)
2×ASI
BNC interface, mirrored out
Decode Output
Video Interface: 1xCVBS/YPbPr/HDMI/SDI
Video Decode: MPEG-2; MPEG4 AVC/H.264
Resolution: 480i, 480p, 576i, 576p, 720p@50/59.94/60, 1080i@50/59.94/60
Chroma: 4:2:0
Audio Interface: 2 x Stereo/4xmono, HDMI, SDI
Audio Decode: MPEG 1 Layer II, LC-AAC, HE-AAC, Dolby Digital/ Dolby Digital Plus
Audio Output Mode: Left, Right, Stereo, 5.1 CH (for HDMI/SDI out only)
System
Local interface
LCD + control buttons
Remote management
Web-server Management
Language
English
Upgrade
USB, web management

KR356H DVB-S2 HD IRD User Manual
6 / 43
General
Power supply
AC 100V~240V
Dimensions
482*300*44.5mm
Weight
3 kgs
Operation temperature
0~45℃
1.4 Principle Chart
IP Output
Decoder
Module
ASI Output 1,2
Video
(CVBS/YPbPr/HDMI/SDI)
Mux
&
BISS
IP
Tuner 2
ASI
CAM/CI 1
Tuner 1
CAM/CI 2 Audio 2: analog stereo
Audio 1: analog stereo or Dolby
Digital/Dolby Digital Plus 5.1 CH
1.5 Appearance and Description
Front Panel Illustration:
1
Mini LCD TV for decoding
2
monitor LCD display for device control and configuration
3
Mini LCD TV power switch
4
NMS Port (for PC connection)
5
DATA Port (for IP stream input & output)
6
Indicators Area (Lock 1&2: to indicate RF input signal lock
status; Lock 3:to indicate the IP or ASI signal Lock status;
Decoder: to indicate the decoding status)
7
Up/Down/Left/Right Buttons
Enter Key
Menu Key
Lock Key

KR356H DVB-S2 HD IRD User Manual
7 / 43
Rear Panel Illustration
1 2 3 4 5 8 9
67
10 11 12 13
Decoder Board
1
USB upgrade port
2
HDMI video/audio output
3
Component video output (YPbPr)
4
Composite video output (CVBS)
5
SDI video/audio output
6
Analog stereo audio out 1 (R/L)
7
Analog stereo audio out 2 (R/L)
Tuner Receiving
Board
8
CAMs /Smart card slots A & B
9
RF signal input and loop-through 1 & 2
10
ASI input Port for re-mux
11
ASI mirrored output ports
12
Power switch/Fuse/Socket
13
Grounding Wire
1.6 System Connection Sample
NDS3565H Coaxial
Cable
NDS3565H
2 Tuner
Encoder/Modulator
RF
1 ASI
A/V
1 IP
2 Tuner
1 ASI
1 IP

KR356H DVB-S2 HD IRD User Manual
8 / 43
Chapter 2 Installation Guide
2.1 Acquisition Check
When user opens the package of the device, it is necessary to check items according to
packing list. Normally it should include the following items:
⚫KR356H DVB-S2 HD IRD
⚫User’s Manual
⚫HDMI Cable
⚫YPbPr Cable
⚫CVBS Cable
⚫SDI Cable
⚫Audio adapt cables
⚫Power Cord
If any item is missing or mismatching with the list above, please contact our company.
2.2 Installation Preparation
When users install device, please follow the below steps. The details of installation will be
described at the rest part of this chapter. Users can also refer rear panel chart during the
installation.
The main content of this chapter including:
⚫Checking the possible device missing or damage during the transportation
⚫Preparing relevant environment for installation
⚫Connecting signal cables
⚫Connecting communication port with PC
2.2.1 Device's Installation Flow Chart Illustrated as following：
Connecting
Grouding
Wire and
Power
Cord
Acquisition
Check Fixing Device Setting Parameter Running Device
Connecting
Signal Wire

KR356H DVB-S2 HD IRD User Manual
9 / 43
2.2.2 Environment Requirement
Item
Requirement
Machine Hall Space
When user installs machine frame array in one machine hall,
the distance between 2 rows of machine frames should be
1.2~1.5m and the distance against wall should be no less
than 0.8m.
Machine Hall Floor
Electric Isolation, Dust Free
Volume resistivity of ground anti-static material:
1X107~1X1010, Grounding current limiting resistance: 1M
(Floor bearing should be greater than 450Kg/㎡)
Environment
Temperature
5~40℃(sustainable ), 0~45℃(short time)，
installing air-conditioning is recommended
Relative Humidity
20%~80% sustainable 10%~90% short time
Pressure
86~105KPa
Door & Window
Installing rubber strip for sealing door-gaps and dual level
glasses for window
Wall
It can be covered with wallpaper, or brightness less paint.
Fire Protection
Fire alarm system and extinguisher
Power
Requiring device power, air-conditioning power and lighting
power are independent to each other. Device power requires
AC power 100-240V 50-60Hz. Please carefully check before
running.
2.2.3 Grounding Requirement
⚫All function modules’ good grounding is the basis of reliability and stability of devices.
Also, they are the most important guarantee of lightning arresting and interference
rejection. Therefore, the system must follow this rule.
⚫Coaxial cables outer conductor and isolation layer should keep proper electric
conducting with the metal housing of device.
⚫Grounding conductor must adopt copper conductor in order to reduce high frequency
impedance, and the grounding wire must be as thick and short as possible.

KR356H DVB-S2 HD IRD User Manual
10 / 43
⚫Users should make sure the 2 ends of grounding wire well electric conducted and be
antirust.
⚫It is prohibited to use any other device as part of grounding electric circuit
⚫The area of the conduction between grounding wire and device’s frame should be no
less than 25mm2.
2.2.4 Frame Grounding
All the machine frames should be connected with protective copper strip. The grounding
wire should be as short as possible and avoid circling. The area of the conduction between
grounding wire and grounding strip should be no less than 25mm2.
2.2.5 Device Grounding
Connecting the device’s grounding rod to frame’s grounding pole with copper wire.
2.3 Wire’s Connection
⚫Connecting Power Cord
User can insert one end into power supply socket, while insert the other end to AC
power.
⚫Connecting Grounding Wire
When the device solely connects to protective ground, it should adopt independent way,
say, share the same ground with other devices. When the device adopts united way, the
grounding resistance should be smaller than 1Ω.
Caution:
Before connecting power cord to KR356H, user should set the power switch to “OFF”.
2.4 Signal Cable Connection
The signal connections include the connection of input signal cable and the connection of
output signal cable. The details are as follows:
2.4.1 KR356H DVB-S2 HD IRD Cables Illustration:
⚫IP Input/output Cable Illustration:

KR356H DVB-S2 HD IRD User Manual
11 / 43
⚫Tuner Cable Illustration:
⚫ASI Input/output Cable Illustration:
⚫Video & Audio output Cable Illustration: (for connection between the
IRD and TV set or home theater)
CVBS Cable YPbPr Cable

KR356H DVB-S2 HD IRD User Manual
12 / 43
HDMI Cable SDI Cable
⚫Audio adapt cables Illustration: (for connection between the IRD and
TV set)

KR356H DVB-S2 HD IRD User Manual
13 / 43
Chapter 3 Operation
The front panel of KR356H DVB-S2 HD IRD is the user-operating interface and the
equipment can be conveniently operated and managed according to the procedures displayed
on the LCD:
Keyboard Function Description:
MENU: Cancel current entered value, resume previous setting; Return to previous menu.
ENTER: Activate the parameters which need modifications, or confirm the change after
modification.
LEFT/RIGHT: Choose and set the parameters.
UP/DOWN: Modify activated parameter or paging up/down when parameter is inactivated.
LOCK: Lock the screen/cancel the lock state. After pressing the lock key, the LCD will
display the current configuring state.
3.1 LCD Menu Class Tree
(See next page :)

KR356H DVB-S2 HD IRD User Manual
14 / 43
Initializing
HD IRD
Bitrate: 70.865Mbps
Main Menu:
Status
Lock
Enter Menu
Status:
Alarm
Status:
Uptime
Main Menu:
Input Sets Input Sets
1: Tuner DVBS/S2
Input Sets
2: Tuner DVBS/S2
Up Down
Main Menu：
TS Config
TS Config:
TSID
TS Config:
ONID
TS Config:
ASI output select
TS output mode:
Mux
Tuner 1
Tuner 2
ASI
IP
ASI output select:
MPTS
SPTS 1
SPTS 8
Main Menu
CI Card CI Card:
Card A
CI Card:
Card B
1: Tuner DVBS/S2
Tuner Parameters
1: Tuner DVBS/S2
Mux Program
Tuner Parameters:
Satellite frequency
LNB frequency
Symbol rate
LNB voltage
22K
Signal Lock
Mux Program:
TS Lock
Parse Program
Select Program
Card A:
Max Birate
Input TS Mode
Card Error Check
Parse Program
Descramble Program
Rom Version
Card Status
Descramble Error
TS Config:
TS output mode
(Same content with ‘ Tuner 1 ’ above)
(Same content with ‘ Card A ’ above)
IP Config:
Input IP
Input Port
Multicast
IGMP Snooping
Service IP
Input Sets
3: ASI 3 ASI:
TS Lock
Parse Program
Select Program
Input Sets
4: IP 4: IP
IP Config
4: IP
Mux Program Mux Program:
TS Lock
Parse Program
Select Program
TS Config:
TS output bitrate
Main Menu：
BISS Descrambling BISS A :
Input TS Mode
Descrambler Key
SK
Word Mode
Burned Key
TS Lock
Parse Program
Descramble Program
(Same content with ‘ BISS A ’ above)
BISS Descrambling:
BISS A
BISS Descrambling:
BISS B

KR356H DVB-S2 HD IRD User Manual
15 / 43
Main Menu:
System System:
Save Config
System:
Load Saved CFG
System:
Factory Reset
System:
LCD Time-out
System:
Lock Keyboard
System:
Product ID
System:
Language
Save Config?
Yes ►No
Load Saved CFG?
Yes ►No
Reset all sets?
Yes ►No
LCD Time-out
►30 s
Lock Keyboard
Yes ►No
xxxxxxxxxxxxxxxxx
xxxxxxxxx
Language
►English 中文
System:
Key Password Set Password
000000
Main Menu：
Network Network:
NMS IP
Network:
Subnet Mask
Network:
Gateway
Network:
MAC Address
Network:
Reset Password
NMS IP
192.168.0.136
Subnet Mask
255.255.255.0
Gateway
192.468.0.1
MAC Address
201212345678
Reset Password
Yes ►No
Network:
Web NMS Port Web NMS Port
80
Main Menu
Decoder Decoder:
Video Format
Audio Mode
Audio Select
Volume
Search Program
Program Select
Rom Version
Decoder Status
Main Menu：
IP Stream
IP Stream:
Output Protocol
IP Stream:
MPTS 1
IP Stream:
Gateway
MPTS 1:
Data Enable
Null PKT Filter
Output IP
Output Port
SPTS 1:
Data Enable
Null PKT Filter
Output IP
Output Port
Bitrate
IP Stream:
Service IP
IP Stream:
Subnet Mask
IP Stream:
SPTS 1
IP Stream:
SPTS 8 (SPTS 2-8 have the same submenus
with ‘ SPTS 1 ’ above)
System:
Version HD IRD
SW x.xx HW x.xx

KR356H DVB-S2 HD IRD User Manual
16 / 43
3.2 General Setting
Switch on the device and after a few seconds’ initialization, it presents start-up pictures as
below:
⚫HD IRD: Device’s name
⚫Bitrate: xx.xxx MHz indicates the current effective bitrate multiplexed output.
Press LOCK key on the front panel to enter the main menu. The LCD will display the
following pages where user can configure the parameters for the device:
User could do all the settings according to the 8 directions displayed on the LCD. User can
press UP/DOWN buttons to specify menu item, and then press ENTER to enter the
submenus as below:
3.2.1 Status
Alarm: The alarm indicator will turn on if there is no A/V signals inputting or outputting bit
rate overflows. User then can enter this menu to check the error type. Otherwise it shows the
‘system is normal’.
Uptime: It displays the working time duration of the device. It times upon power on.
Start up…
Start OK…
HD IRD
Bitrate: xx.xxx Mbps
Main menu
1 Status
2 Input Sets
3 CI Card
4 BISS Descramble
5 TS Config
6 Decoder
7 IP Stream
8 Network
9 System
Alarm
System is normal

KR356H DVB-S2 HD IRD User Manual
17 / 43
3.2.2 Input Sets
KR356H supports 2 tuners input, 1 ASI input and 1 IP stream input. Users can enter ‘Input
Sets’to configure the tuner/IP parameters to receive the transport streams and select
programs to mux out. It displays as below:
➢Tuner DVBS/S2:
Press ENTER key to enter ‘1 Tuner DVBS/S2’(or ‘2 Tuner DVBS/S2’), it displays as
below:
Tuner Parameters:
Users can enter this menu to configure the tuner parameters separately to receive the tuner
programs.
Mux Program:
Users can parse the Tuner input program list and select program(s) to mux out in this menu.
Tuner Parameters:
Satellite frequency
LNB frequency
Symbol rate
LNB Voltage
22K
Signal Lock
Uptime
1 Day(s) 03:30:02
1 Tuner DVBS/S2
Tuner Parameters
Mux Program
Input Sets
1 Tuner DVBS/S2
2 Tuner DVBS/S2
3 ASI
4 IP
For checking signal status and quality etc

KR356H DVB-S2 HD IRD User Manual
18 / 43
NOTE: Multiplexing operation can only take effect on condition that the “TS output
mode”is set to “Mux”under ‘TS Config’. (i.e.: TS Config → TS output mode → Mux)
➢ASI:
Users can parse ASI input programs and select program(s) to mux out under this menu. The
operating method is same with what explained above.
➢IP:
Press ENTER key to enter ‘4 IP’, it displays as below:
Mux Program
TS Lock
Parse Program
Select Program
TS Locked
Bitrate: 4.040 Mbps
Searching Program
Get 7 Programs
For reading the input
bitrate
For reading the number
of programs from
Tuner 1 (or 2)
Mux Program (0/7)
1: CCTV 1 X
‘1/7’represents there are all 7 programs in the list and 1 program has been selected to mux out through ASI.
Mux Program (0/7)
1: CCTV 1 [←]
Mux Program (0/7)
1: CCTV 1 [→]
Mux Program (1/7)
1: CCTV 1 √
Process of selecting programs to
output through front panel:
[←]: to cancel program output;
[→]: to output the program
“√”: a symbol indicating the
corresponding program has been
selected to output;
“X”: a symbol indicating the
corresponding program has not
been selected to output
Press ENTER key
Press RIGHT/LEFT
key to shift arrow
Press ENTER key to
confirm
3: ASI
TS Lock
Parse Program
Select Program
4: IP
IP Config
Mux Program

KR356H DVB-S2 HD IRD User Manual
19 / 43
IP Config:
Users can enter this menu to configure IP parameters according to the IP source to receive
the IP programs.
Mux Program:
Users can parse the IP input program list and select programs to mux out in this menu. The
operating method is same with what explained above.
3.2.3 CI Card
KR356H supports 2 CI cards (Card A & Card B) to descramble programs from either
encrypted RF, ASI or IP. Users can press ENTER key to enter ‘CI Card’to configure the 2
cards respectively.
Press ENTER key to enter Card A (or Card B):
Mux Program
TS Lock
Parse Program
Select Program
Off, V2 and V3 Optional
CI Card
Card A
Card B
IP Config
Input IP
Input Port
Multicast
IGMP Snooping
Service IP
Card A
Max Bitrate
Input TS Mode
Card Error Check
Parse Program
Descramble Program
Rom Version
Card Status
Descramble Error

KR356H DVB-S2 HD IRD User Manual
20 / 43
➢Max Bit rate
CI Max Bitrate options range from 48-108Mbps. Move the triangle to select a value as
principle: Actual Input Bitrate≤ Max Bitrate≤CI Max decrypting capacity
➢Input TS Mode
KR356H has 4 signal sources: Tuner 1, Tuner 2, ASI, and IP. One CI card can be applied to
descramble one channel input signal from the 4 signal sources. ‘Skip CI card’means to skip
the card which is used for FTA stream.
➢Card Error Check
Users can decide whether to enable or disable the card error check function in this menu.
➢Parse Program
Users can read the quantity of programs parsed from the de-scrambled channel.
➢Descramble Program
Users can select program(s) from the searched out programs to descramble. The quantity to
be descrambled will depend on the CAM/CI performance you apply to.
Max Bitrate
►48 Mbps
Input TS Mode
►Skip CI Card
Tuner 1
Tuner 2
ASI
IP
Card Error Check
►Enable
Searching Program
Get 8 Programs
►1 CETV 1 √
2 CCTV 4A X