Clevertouch SCETA User manual

INSTALLATION GUIDE
FOR WALLMOUNTED AND MOBILE ELECTRICAL
HEIGHT ADJUSTABLE “LIGHT” SYSTEMS FOR USE
WITH UP TO 86" DISPLAYS
INSTALLATION GUIDE

2
CONTENT
Important hazard and safety notes 4
Assembly instructions 5 – 8
Mobile systems 5
Systems with floor panel 5
Wall mounted systems 5
“Light” Frame installation 6
Operating unit for height 6
EC-Declaration of conformity 7–10
Certicate of compliance 11

3
Total load: 150 kg/ 330 lbs
Max. additional load: 120 kg/ 264 lbs
Thank you for purchasing our electrical height
adjustable units. Please carefully read all
provided informations before assembling and
usage. Assembly is uncomplicated but should be
done by trained personal only.
General hints for startup
Before connecting the unit to the power supply
please check that up/down movement of the unit will
not be blocked by any table, chair, other furniture etc.
Please also read attached hazard and safety notes.
Limitation of usage
This unit must not be equipped / used with other
components (I.e. trolley, frame unit for interactive
components, etc. ) but those, which are certified by us.
We cannot take over any warranty for safety and proper
function for third party components.
The maximum load of the unit is 150 kg/ 330 lbs.
So do not mount external units (interactive monitors,
boards etc.) with a weight higher than 120 kg/ 264 lbs or
others not certified by us.
Hint
Changes made to components, which serve to technical
progress, can be put into effect without prior notice.

4
Please carefully read the below hazard and safety notes before using the height adjustment unit.
This adds to make the unit work failure-free and avoids accidents.
Electrical safety
Connect unit to a free accessible 110 – 230 V / 50 Hz grounded power outlet only. Make sure, the unit can
be immediately separated from the power outlet.
Only use unit in dry rooms, protect unit from water and other liquids. Only wipe unit with dry cloth.
Do not open lift unit. RISK OF ELECTRIC SHOCK. There are no serviceable parts inside.
In case of disfunction unplug unit from power outlet and call an authorised technical service person.
Do not overrun line cord or damage in any other way. Replace damaged line cords immediately with
new one from same type.
The socket connections of the unit and the wall socket must be easily accessible.
The device is not dripping or splash water protected.
Do not place objects filled with liquids on or spray the device.
General hints for mechanical safety
Do not improperly load unit. Do not mount other than original parts (whiteboard, wings, interactive board,
interactive monitor, projector) in conjunction with original mounting parts. Do not hang on unit.
VERY HEAVY UNIT.
Severe risk of injury when unit falls over due to improper usage. Only use original mounting parts
provided with the system. Max load of lift unit is 150 kg/ 330 lbs. Do not exceed.
Assure installation of unit by authorized service person only.
Before moving the unit up or down ashure at least a safety distance of 20 cm/ 7.9 from any part of
the unit to any other fitment in order to avoid shear traps or squeezing points.
In case of accident please release operating panel. Movement of unit will stop immediately.
Special hints for moveable und free standing units
Only operate unit on plane and stable floors. Move unit on plane floors only.
Risk of tilting when overrunning floorunevennesses, door sills and similar.
VERY HEAVY UNIT.
Severe risk of injury when unit falls over. Lock brakes of front wheels when operating unit.
Special hints for wall mounted units
Use appropriate wall mounting material only. Choose douwels and screws according to the wall type
and material. Using improper mounting material may result in tilting of the unit and severe risk of injury.
Wall mounting must be done by experienced personal only.
Instructions for disposal
Do not dispose to consumer waste.
Important hazard & safety notes

5
2.1.
WALL MOUNTED SYSTEM
Fix 2 x Z-bracket to the wall.
Wallmounting material is not
included.
1Put 2 sliding blocks into the rail
2Connect it to the Z-bracket
3Screw the floor leveling feet against the floor
2 x selflocking nut M8
2 x washer 8 mm
1
2
1
2
≈10 cm/ 4"
FOR FLOOR PANEL
Connect the floor panel to the column.
4 x countersunk Allen head screw
M8 x 40 mm
SYSTEMS WITH FLOOR PANEL
2
2
3
MOBILE SYSTEMS
FOR V-STAND
Connect the trolley to the column.
4 x lens head Allen screw with flange
M8 x 40 mm
≈10 cm/ 4"

6
2.
2.
Connect the
5-pole plug
of the cable
remote control
to the column.
3.
Connect the power cable
to the
column.
1.
For moving the unit up or down just press and hold the buttons
on the control unit. Releasing the button will immediately stop the
movement. So in case of emergency just unhand the control unit
(watchdog switch).
Height adjustable
AUp
BDown
A B
1.
1Attach upper bar using 2 x lens head Allen screw with flange
M8 x 85 (long) and ensure the slotted holes facing upwards
and towards the screen.
2Attach lower bar using 2 x M6 x 30 (short) screws and ensure
the slotted holes facing floor and towards the screen.
“LIGHT” FRAME INSTALLATION
OPERATING UNIT FOR HEIGHT ADJUST-
Secure “lift & lock”-brackets to
the display, before
attaching to mount.
To attach the display to the
mount use the included
4 x M8 x 16 mm or
4 x M6 x 16 mm lens head
Allen screw with flange.
1
2
2

EC-DECLARATION OF CONFORMITY
in accordance with European directive 2006/42/EG, part II A
We hereby certify that the machine described hereafter, in its design and construction and in the model put into circulation,
complies with all relevant health and safety requirements of the EC machinery directive 2006/42/EG. Any modification to our
product, without our written consent, will result in this declaration to become void.
Manufactors name or of his representative Conen Produkte GmbH, D - 54497 Morbach-Gonzerath
Description of the machine Motorized lift system for displays and (interactive) boards
Part-No. SCETA (-L) / SCETA-W(L) / SCETTA/ SCETAVLI / CCELW-AF
European directive(s)
EC-machinery directive (2006/42/EG)
EMC directive (2014/3/EU)
WEEE-Directive 2012/19/EU
WEEE-Registration-Nr 12204025
European standards
EN 14434:2010-04 / EN 60335-1:2012 / EN 62233:2008
EN 61000-3-2:2006+A1:2009
EN 61000-3-3:2008
EN 61000-6-1:2007
EN 61000-6-3:2007
EN 55024:2010 / 55014-1:2006+A1:2009+A2:2011
National standards and specifications
ROHS Directive 2011/65/EU
IEC 61558-1 und 2:2009
C/US Authorisation to Mark „ETL“
Person in charge for document collection Jürgen Heesen
Declaration signed by Marcus Staudt
Position Product developement
Date and signature 10.08.2018,

EG-KONFORMITÄTSERKLÄRUNG
gemäß EG-Richtlinie Maschinen 2006/42/EG, Anhang II A
Hiermit erklären wir, dass die nachstehend bezeichnete Maschine in ihrer Konzeption und Bauart sowie in der von uns in Verkehr
gebrachten Ausführung den grundlegenden Sicherheits- und Gesundheitsanforderungen der EG-Richtlinie Maschine entspricht.
Bei einer mit uns nicht abgestimmten Änderung der Maschine verliert diese Erklärung ihre Gültigkeit.
Hersteller Conen Produkte GmbH, 54497 Morbach-Gonzerath
Bezeichnung der Maschine Elektrische Hubsäuleneinheit für Tafelsysteme
Maschinen-Nr. SCETA (-L) / SCETA-W(L) / SCETTA/ SCETAVLI / CCELW-AF
Zutreffende EG-Richtlinien
EG-Richtlinie Maschine (2006/42/EG)
EG – EMV (2014/3/EU)
ROHS Directive 2011/65/EU
WEEE-Richtlinie 2012/19/EU
WEEE-Registriernummer 12204025
Angewandte harmonisierte Normen insbesondere
EN 14434:2010-04 / EN 60335-1:2012 / EN 62233:2008
EN 61000-3-2:2006+A1:2009
EN 61000-3-3:2008
EN 61000-6-1:2007
EN 61000-6-3:2007
EN 55024:2010 / 55014-1:2006+A1:2009+A2:2011
Angewandte nationale Normen und
technische Spezifikationen insbesondere
ROHS Directive 2011/65/EU
IEC 61558-1 und 2:2009
C/US Authorisation to Mark „ETL“
Bevollmächtigter für die Zusammenstellung der Dokumente Jürgen Heesen
Name des Unterzeichners Marcus Staudt
Funktion des Unterzeichners Leiter Produktentwicklung
Datum/Unterschrift 10.08.2018,

EU CONFORMITEITSVERKLARING
volgens EG-richtlijn 2006/42/EG, bijlage II A
Hierbij verklaren wij,dat de hierna beschreven producten, in ontwerp en constructie alsmede in de in omloop gebrachte uitvoe-
ring, voldoen aan de veiligheids-en gezondheidseisen van de Europese Machinerichtlijn. Bij onbevoegde wijzigingen aan ons
product verliest deze verklaring haar geldigheid.
Producent Conen Produkte GmbH, D - 54497 Morbach-Gonzerath
Produktbeschrijving Electrisch kolommensysteem voor monitoren en (interactieve) schoolborden
Produktnummer SCETA (-L) / SCETA-W(L) / SCETTA/ SCETAVLI / CCELW-AF
Geldende EG richtlijnen
EG-machinerichtlijn (2006/42/EG)
EMC richtlijn (2014/3/EU)
WEEE richtlijn 2012/19/EU
WEEE-Register 12204025
Specifiek toegepaste geharmoniseerde normen
EN 14434:2010-04 / EN 60335-1:2012 / EN 62233:2008
EN 61000-3-2:2006+A1:2009
EN 61000-3-3:2008
EN 61000-6-1:2007
EN 61000-6-3:2007
EN 55024:2010 / 55014-1:2006+A1:2009+A2:2011
Toegepaste nationale normen en technische
specificaties
ROHS Directive 2011/65/EU
IEC 61558-1 en 2:2009
C/US authorisatie voor “ETL” markering
Gevolmachtigde voor de opstelling der documenten Jürgen Heesen
Naam van ondergetekende Marcus Staudt
Funktie ondertekenaar Manager Productontwikkeling
Datum / Handtekening 10.08.2018,

EC-DECLARATION DE CONFORMITÉ
conformément à la directive européenne 2006/42/CE, partie II A
Nous certifions que la machine décrite ci-après, dans sa conception et sa construction et dans le modèle mis en circulation,
conforme à toutes les exigences de la directive 2006/42/CE. Toute modification de notre produit, sans notre consentement écrit,
se traduira par la présente déclaration à devenir nulle.
Nom du fabricant ou de son représentant Conen Produkte GmbH, D - 54497 Morbach-Gonzerath
Description de la machine Système de levage motorisé pour les moniteurs et les tableaux (interactive)
Réference SCETA (-L) / SCETA-W(L) / SCETTA/ SCETAVLI / CCELW-AF
Directive(s) européenne(s)
Directive CE machines (2006/42/CE)
Directive CEM (2014/3/CE)
Directive WEEE 2012/19/EU
Numéro d’enregistrement WEEE 12204025
Normes européennes
EN 14434:2010-04 / EN 60335-1:2012 / EN 62233:2008
EN 61000-3-2:2006+A1:2009
EN 61000-3-3:2008
EN 61000-6-1:2007
EN 61000-6-3:2007
EN 55024:2010 / 55014-1:2006+A1:2009+A2:2011
Normes nationales
Directive ROHS 2011/65/EU
IEC 61558-1 et 2:2009
C/US authorisation pour marquer „ETL“
Responsable de collection de documents Jürgen Heesen
Déclaration signée par Marcus Staudt
Position Developement du produit
Date et signature 10.08.2018,

11

Manufacturer
Clevertouch
Europe House,Littlebrook
DC1,Shield Rd, London
DA1 5UR, UK
[phone]
[email protected]
www.clevertouch.com