Clickfree HD225 User manual

To Backup a Windows® Computer
1.Ensure that your computer is on and you are
logged in.
2. Connect the Clickfree Backup to your
computer’s USB port using the USB cable that is
included.
3. Wait for approximately 60 seconds. The
Clickfree backup program will automatically start.
If the Clickfree backup program does not appear
on your computer screen, please see the
Troubleshooting section.
4.Your backup will start and run automatically.
5. When backup is complete, just unplug the
Clickfree Backup from your computer.
Congratulations! Your files are now safe.
Note for Windows® Vista Users:
Some Windows Vista users will see the following
screens on their computer. If this screen appears
Mac OSX Leopard 10.5 or later
1. Ensure that your computer is on and you are
logged in.
2. Connect the Clickfree Backup to your
computer’s USB port using the USB cable that is
included.
3. Wait for approximately 60 seconds. This
window appears only once when you first connect
your Clickfree device. Double-Click on this window
to start the Clickfree backup program.
This window will also appear only once when you
first connect your Clickfree device.
a) Select “Make my device work onMac”. You will
only need to do this once.
4. Your backup will start and run automatically.
Clickfree™ Portable Backup Drive Quickstart Guide http://www.clickfree.com/2_5qsg.html
1 of 2 25/02/2009 4:21 P
M

on your computer please do the following:
1) Check the "Always do this for software and
games:" box and then
2) Click on the "Start ClickFree Backup".
If this screen appears on your computer, just
close this window.
Note: These screens should only appear once, the first
time you plug in a Clickfree product.
To Restore to a Windows® Computer
1. Ensure that your computer that youwill restore
to is on and you are logged in.
2. Connect the Clickfree Backup to your
computer’s USB port using the USB cable that is
included.
3. When the Clickfree program starts and you see
the “Welcome” screen with the countdown, click
on the “Restore” button at the bottom of the
screen.
4. The main Restore screen will now appear.
Follow the instructions on the screens to restore
either some or all of your backed up content. For
more detailed instructions, please see the user
manual.
5. Whenbackup is complete, just unplug the
Clickfree Backup from your computer.
Congratulations! Your files are now safe.
To Restore to a Mac Computer
1. Ensure that your computer that you will restore
to is on and you are logged in.
2. Connect the Clickfree Backup to your
computer’s USB port using the USB cable that is
included. If it is a new computer, then you will see
this window:
a) Double click on this icon to start the Clickfree
program.
3. Once Clickfree starts, click on the “Restore”
buttona the bottom of the screen and follow the
instructions to restore either some, or all of your
backed up content.
Clickfree™ Portable Backup Drive Quickstart Guide http://www.clickfree.com/2_5qsg.html
2 of 2 25/02/2009 4:21 P
M