Clickfree C2 User manual

To Backup a Windows® Computer
1. Ensure that your computer is on and you are
logged in.
2. Connect the Clickfree Backup Drive to one of
your computer’s USB ports.
3. Wait for approximately 60 seconds. The
Clickfree backup program will automatically start.
If the Clickfree backup program does not appear
on your computer screen, please see the
Troubleshooting section.
4.Your backup will start and run automatically.
5. When backup is complete, just unplug the
Clickfree Backup Drive from your computer.
Congratulations! Your files are now safe.
Quickstart Guide Note for Windows® Vista
Users:
Some Windows Vista users will see the following
Mac OSX Leopard 10.5 or later
1. Ensure that your computer is on and you are
logged in.
2. Connect the Clickfree Backup to your
computer’s USB port using the USB cable that is
included.
3. Wait for approximately 60 seconds. This
window appears only once when you first connect
your Clickfree device. Double-Click on this
window to start the Clickfree backup program.
This window will also appear only once when you
first connect your Clickfree device.
a) Select "Make my device work on Mac". You
will only need to do this once.
4. Your backup will start and run automatically.
Clickfree™ C2 Portable Backup Drive Quickstart Guide
1 of 3

screens on their computer. If this screenappears
on your computer please do the following:
1) Check the “Always do this for software and
games” box and then,
2) Click on “Start Clickfree Backup”
If this screen appears on your computer, just
close this window.
Note: These screens should only appear once, the first
time you plug in a Clickfree product.
To Restore to a Windows® Computer
1. Ensure that your computer that you will restore
to is on and you are logged in.
2. Connect the Clickfree Backup to your
computer’s USB port using the USB cable that is
included.
3.When the Clickfree program starts and you see
the “Welcome” screen with the countdown, click
on the “Restore” button at the bottom of the
screen.
4.Once Clickfree starts, click on the “Restore”
buttonat the bottom of the screen and follow the
instructions to restore either some, or all of your
backed up content.
To Import Music from an iPod/iPhone to a
Windows Computer
1. Ensure that your computer that youwill restore
to is on and you are logged in.
2. Connect the Clickfree Backup Drive to one of
your computer’s USB ports.
5.When backup is complete, just unplug the
Clickfree Backup Drive from your computer.
Congratulations! Your files are now safe.
To Restore to a Mac Computer
1. Ensure that your computer that you will restore
to is on and you are logged in.
2. Connect the Clickfree Backup to your
computer’s USB port.
3.If it is a new computer, thenyou will see this
window:
a) Double click onthis iconto start the Clickfree
program.
4. Once Clickfree starts, click onthe “Restore”
buttonat the bottom of the screen and follow the
instructions to restore either some, or all of your
backed up content.
Clickfree™ C2 Portable Backup Drive Quickstart Guide
2 of 3

3. Connect your iPod/iPhone to the Clickfree
Backup Drive.
4. When the Clickfree program starts and you
see the “Welcome” screen with the countdown,
click on the “Import Music” buttonat the bottom
of the screen.
A viewer with all of the music and playlists will
appear. Choose the music or playlists by using
the check boxes. Whenyou're ready to Import,
click on the "Start Import" button at the bottom
right.
Clickfree™ C2 Portable Backup Drive Quickstart Guide
3 of 3