Clifford 3105X User manual

THE SCIENCE OF SECURITY™
OWNER’S GUIDE
MODEL
3105X

Congratulations
Congratulations on the purchase of your state-of-the-art security system.
Reading this Owner’s Guide prior to using your system will help maxi-
mize the use of your system and its many features. For more informa-
tion, please visit us online (see back cover for URL).
For any additional questions, please contact your authorized Directed
dealer or contact Directed at 1-800-753-0600. (U.S. only)
Additional Guide Information
Only basic commands, features and essential information are covered
in this compact guide. Your product has many advanced features
which are not discussed here, please consult the expanded online
version of these at: www.viper.com.
Most sections in this guide also contain additional information which
can be found in the expanded online version.

Important information
Government Regulations and Safety information
Read the Government Regulations and Warning! Safety
First sections of this manual prior to operating this system.
Your Warranty
Your system comes with a warranty. The warranty terms are detailed
at the end of this guide. Make sure that you receive the proof of
purchase from your dealer, indicating the product was installed by an
authorized Directed dealer.
System maintenance
This system needs no specific maintenance beyond remote control
battery replacement. The 1-way remote is powered by two 3V,
CR2016 batteries.
Battery disposal
Directed cares about the environment. If you need to dis-
pose of the battery, please do so in accordance with your
municipal requirements for battery disposal or return to Di-
rected.

Contents
Congratulations .................................................................................................. ii
Important information ........................................................................................ iii
System maintenance........................................................................................... iii
Battery disposal...................................................................................iii
Control Center .................................................................................................... 2
Remote control command table............................................................................. 3
Three-button remote configuration ........................................................................ 3
Remote control functions ...................................................................................... 4
Arm ................................................................................................... 4
Disarm ............................................................................................... 4
Panic.................................................................................................. 4
Optional auxiliary .............................................................................. 4
Government Regulations ...................................................................................... 6
Limited lifetime consumer warranty ....................................................................... 8

2© 2018 Directed. All rights reserved.
Control Center
Valet switch
LED
Control button
Status LED
Control Center
Control Center
Control Center Valet switch
LED
Control button
Status LED
Control Center
Antenna
Antenna
The Control Center, typically located on the upper part of the front
windshield. It consists of:
• The In-vehicle system antenna.
• The Status LED, as a visual indicator of the system’s status.
• The Control button, for placing the system into Valet Mode* and
to perform the Emergency Override* operation.
* See Valet Mode and Disarming without a Transmitter in the “Using your
System” section of the online guide.

3© 2018 Directed. All rights reserved.
Remote control command table
Feature Description
Lock the doors and arm the vehicle
Unlock the doors and disarm the vehicle
Activate Silent Mode and Auxiliary functions
*Panic
and Press together to control an Auxiliary output
* On some remote controls, the Icon may exist instead of the icon. This guide
uses the icon throughout, but the functionality is the same regardless of which one
of these icons is used by your system.
Three-button remote configuration
This system may be used with an optional 3-button remote, which is
available for purchase through your authorized Directed dealer. The
table below describes the basic 3-button functions.
Button Command
and Lock and unlock the doors, arm and disarm the vehicle
Activate Silent Mode and Auxiliary functions
Panic

4© 2018 Directed. All rights reserved.
Remote control functions
The remote control buttons are used to send commands to the sys-
tem. The descriptions below reflect the standard configuration for this
system. The buttons can be custom configured for the user’s specific
needs by the installer.
Arm
Press and release . Doors lock and system is armed.
Disarm
Press and release The doors unlock and system is disarmed.
AUX
Press and release
Silent mode and an optional auxiliary function are controlled by press-
ing this button. (Silent Mode works by pressing this button for less than
one second before arming or disarming. An optional auxiliary func-
tion, such as trunk release, can be controlled by pressing this button
for 1.5 seconds.)
The auxiliary output controls __________________________.
Panic
Press and hold
The panic feature is controlled by pressing this button for two seconds.
Optional auxiliary
Press and simultaneously. An optional auxiliary convenience
or expansion function that you have added to your system can be
activated by pressing these buttons simultaneously.
The auxiliary output controls_________________________.

5© 2018 Directed. All rights reserved.
Patent Information
This product is covered by one or more of the following United States
patents:
Vehicle Security Patents
5,467,070; 5,532,670; 5,534,845; 5,563,576; 5,646,591;
5,650,774; 5,673,017; 5,712,638; 5,872,519; 5,914,667;
5,952,933; 5,945,936; 5,990,786; 6,028,505; 6,452,484
Remote Start
5,349,931; 5,872,519; 5,914,667; 5,952,933; 5,945,936;
5,990,786; 6,028,372; 6,467,448; 6,561,151; 7,191,053;
7,483,783
Other patents pending

6© 2018 Directed. All rights reserved.
Government Regulations
This device complies with Part 15 of FCC rules. Operation is subject to the fol-
lowing two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesirable operation.
This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates and can radiate radio fre-
quency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful interference to radio or television,
which can be determined by turning the equipment OFF and ON, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.
Remote Controls
To satisfy FCC RF exposure compliance requirements, this device should be
used in hand-held, hand operated configurations only. The device and its an-
tenna must maintain a separation distance of 20 cm or more from the person’s
body, except for the hand and wrists, to satisfy RF exposure compliance. This
device is designed to be used in a person’s hands and its operating configu-
rations do not support normal transmissions while it is carried in pockets or
holsters next to a person’s body.

7© 2018 Directed. All rights reserved.
Receiver antenna
To satisfy FCC RF exposure compliance requirements, the device and its an-
tenna must maintain a separation distance of 20 cm or more from the person’s
body, except for the hand and wrists, to satisfy RF exposure compliance.
This device complies with the Industry Canada Radio Standards Specification
RSS 210. Its use is authorized only on a no-interference, no-protection basis;
in other words, this device must not be used if it is determined that it causes
harmful interference to services authorized by IC. In addition, the user of this
device must accept any radio interference that may be received, even if this
interference could affect the operation of the device.
WARNING! Changes or modifications not expressly approved by the party re-
sponsible for compliance could void the user’s authority to operate this device.