Clifford 3305X User manual

THE SCIENCE OF SECURITY™
OWNER’S GUIDE
MODEL
3305X

i
© 2018 Directed. All rights reserved.
Congratulations
Congratulations on the purchase of your state-of-the-art security and
remote start system. Reading this Owner’s Guide prior to using your
system will help maximize the use of your system and its many fea-
tures. For more information, please visit us online (see back cover
for URL).For any additional questions, please contact your authorized
Directed dealer or contact Directed at 1-800-753-0600 (U.S. only).
Additional support is also available at: http://support.directed.com.
Additional Guide Information
Only basic commands, features and essential information are covered
in this compact guide. Your product has many advanced features
which are not discussed here, please consult the expanded online
version for these at: www.viper.com. Most sections in this guide also
contain additional information which can be found in the expanded
online version.

ii © 2018 Directed. All rights reserved.
Important information
Government Regulations
Read the Government Regulations section of this manual
prior to operating this system.
Your Warranty
Your system comes with a warranty. The warranty terms are detailed
at the end of this guide. Make sure that you receive the proof of
purchase from your dealer, indicating the product was installed by an
authorized Directed dealer.
System maintenance
This system needs no specific maintenance beyond remote control
battery replacement. The 2-way remote is powered by one 1.5V AAA
battery. The 1-way remote is powered by two 3V, CR2016 batteries.
Battery Level Indicator, 2-way
The Battery Level indicator has four level indicators that serve as a
visual indication of battery charge. When the battery reaches a low
charge level that requires replacement, the remote control generates
a single notification chirp, and the Battery Level indicator flashes con-
tinuously.

Patent Information
This product is covered by one or more of the following United States
patents:
Remote Start Patents:
5,349,931; 5,872,519; 5,914,667; 5,952,933; 5,945,936;
5,990,786; 6,028,372; 6,467,448; 6,561,151; 7,191,053;
7,483,783
Vehicle Security Patents:
5,467,070; 5,532,670; 5,534,845; 5,563,576; 5,646,591;
5,650,774; 5,673,017; 5,712,638; 5,872,519; 5,914,667;
5,952,933; 5,945,936; 5,990,786; 6,028,505; 6,452,484
Other patents pending.
Contents
Congratulations ................................................................................................... i
Important information ......................................................................................... ii
System maintenance............................................................................................ ii
Patent Information ............................................................................................... 1
LCD Screen ....................................................................................................... 2
LCD status icons .................................................................................................. 3
Remote control configuration................................................................................ 4
2-way standard configuration................................................................ 4
Remote control functions ...................................................................................... 5
2- way and 1- way .............................................................................. 5
Government Regulations ...................................................................................... 6
Limited lifetime consumer warranty ....................................................................... 8

2© 2018 Directed. All rights reserved.
LCD Screen
    











LCD Icon descriptions
1. Transmit 10. Battery level indicator
2. Out-of-range 11. Remote sending
3. Receive 12. Vibrate mode
4. Auxiliary output 2 or 3 13. Ignition
5. Garage door (no function) 14. Vehicle number
6. Warn away 15. Door
7. Alarm 16. Arm
8. Trunk or Hood 17. Disarm
9. Sensor

3
© 2018 Directed. All rights reserved.
LCD status icons
Icon Description
1On during remote command transmission to the vehicle.
2On during remote command transmission to vehicle, but
command page is not received.
3On during receipt of page from the vehicle to the
remote.
4Displays which auxiliary is operating, or which security
sensor is in Warn Away or alarm state.
5No Function
6
+
Displays when a security feature is tripped, but not to
full alarm.
7
+
Displays when a security is tripped to a full alarm state.
8Trunk icon flashes a few seconds during full alarm and
then remains displayed until page is cleared.
9Shock sensor icon flashes a few seconds during Warn
Away and full alarm, and then remains displayed until
page is cleared.
10 Battery icon displays current charge capacity of the
remote’s battery.
11 Bar indicates remote is sending.
12 Vibrator icon displays if remote is programmed for
vibrator notification. (See remote Programming section)
13 Ignition icon flashes a few seconds during full alarm,
then remains displayed until page is cleared.

4© 2018 Directed. All rights reserved.
Icon Description
Hood icon flashes a few seconds during full alarm, and
then remains displayed until page is cleared.
14 Displays the vehicle (1of 4) that the remote controls.
See “Vehicle Select” section.
15 Door icon flashes a few seconds, and then remains
displayed until page is cleared.
16 Arm icon flashes when doors are locking, and then
remains displayed until the system is disarmed.
17 Disarm icon flashes when doors are unlocking, and
then remains displayed until the system is armed.
Remote control configuration
2-way standard configuration
Arm

Disarm

Channel 2/Silent Mode AUX
Panic
AUX
AUX
AUX
P
*
Channel 3

and

* On some remote controls, the
AUX
AUX
AUX
P
Icon may exist instead of the
AUX
AUX
AUX
P
icon. This guide
uses the
AUX
AUX
AUX
P
icon throughout, but the functionality is the same regardless of which one
of these icons is used by your system.

5
© 2018 Directed. All rights reserved.
Remote control functions
The LCD remote control buttons are used to send commands to the sys-
tem. The descriptions below reflect the standard configuration for this
system. The buttons can be custom configured for the user’s specific
needs by the installer.*
2- way and 1- way
• Press and release

to lock the doors and arm the vehicle.
• Press and release

to unlock the doors and disarm the vehicle.
• Press and release AUX then press

or

to activate Silent
Mode™ or press and hold for approximately two seconds to
activate an optional auxiliary function such as trunk release.
The auxiliary output controls____________________
• Press and hold
AUX
AUX
AUX
P
for two seconds, to activate Panic.
• Press and release

and

simultaneously to activate an
auxiliary convenience or expansion option.
The auxiliary output controls____________________
* See this section in full online guide for additional details.

6© 2018 Directed. All rights reserved.
Government Regulations
This device complies with Part 15 of FCC rules. Operation is subject
to the following two conditions: (1) This device may not cause harm-
ful interference, and (2) This device must accept any interference re-
ceived, including interference that may cause undesirable operation.
This equipment has been tested and found to comply with the limits for
a class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates and
can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television, which can be
determined by turning the equipment OFF and ON, the user is encour-
aged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for
help.
Remote Controls
To satisfy FCC RF exposure compliance requirements, this device
should be used in hand-held, hand operated configurations only. The
device and its antenna must maintain a separation distance of 20 cm

7
© 2018 Directed. All rights reserved.
or more from the person’s body, except for the hand and wrists, to
satisfy RF exposure compliance. This device is designed to be used
in a person’s hands and its operating configurations do not support
normal transmissions while it is carried in pockets or holsters next to a
person’s body.
Receiver antenna
To satisfy FCC RF exposure compliance requirements, the device and
its antenna must maintain a separation distance of 20 cm or more
from the person’s body, except for the hand and wrists, to satisfy RF
exposure compliance.
This device complies with the Industry Canada Radio Standards
Specification RSS 210. Its use is authorized only on a no-interference,
no-protection basis; in other words, this device must not be used if it
is determined that it causes harmful interference to services authorized
by IC. In addition, the user of this device must accept any radio inter-
ference that may be received, even if this interference could affect the
operation of the device.
WARNING! Changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate this device.