Clifford IntelliPage IntelliPage System Car Alarm User manual

Owner'sManual
World-ClassAutoSecurity TM
IntelliPage

The IntelliPage system is covered by
one or more of the following Clifford Electronics patents:
4,158,874; 4,233,642; 4,327,444; 4,383,242; 4,430,685; 4,845,464;
4,887,064; 4,890,108; 4,922,224; 4,997,053; 5,081,667; 5,146,215;
5,157,375, 5,467,070 and other patents pending.

WARNING
The IntelliPage system is designed to be used ONLY on a fuel-injected, gasoline
or diesel powered vehicle with an automatic transmission. Installing an Intelli-
Page on a vehicle that has a manual transmission poses an EXTREME SAFETY
RISK! Never install a Clifford remote engine starting product on a manual
transmission vehicle.
Always exercise good judgment and common sense when using the
remote starter:
• NEVER remotely start the vehicle in an enclosed area without suffi-
cient ventilation.
• NEVER allow children access to the remote controls.
• NEVER engage the ShortStop nor one or both AutoStart features if the
vehicle is in an enclosed area without adequate ventilation.
• NEVER remotely start or use the ShortStop feature with a person or
pet in the car (exhaust fumes may leak into the passenger compart-
ment).
• In case of transmission slippage, NEVER remotely start the engine if
you or someone else is directly behind or in front of the vehicle.

Table of Contents
Standard Features of the IntelliPage . . . . . . . . . . . . . . . . . . . . . 3
Paging-Activated Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Additional Remote Engine Starting Features . . . . . . . . . . . . . . . . . . . . . 4
Remote Controlled Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Additional Security and Convenience Features . . . . . . . . . . . . . . . . . . . 8
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Your 4-button/16-channel remote controls . . . . . . . . . . . . . . . . . 14
How to use your keychain remote control . . . . . . . . . . . . . . . . . . . . . . 14
What each button/channel does . . . . . . . . . . . . . . . . . . . . . . . . . . 15
How to interpret the chirps and parking light flashes . . . . . . . . . . . . 17
Anti-CodeGrabbing™ (ACG) with Random Code Encryption . . . . . . . 17
Extended accessory power . . . . . . . . . . . . . . . . . . . . . . . . . . 18
AutoArming™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
AutoArming enable/disable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Visual acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
AutoArm & Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
User-selectable entry delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Instant AutoArming bypass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
UltraSecure™ Coded Valet Mode . . . . . . . . . . . . . . . . . . . . . . 18
Your secret valet code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
To enable valet mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
To exit valet mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Remote controlled valet mode entry and exit . . . . . . . . . . . . . . . . . . . 19
Keyless entry in valet mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Setting your own secret valet code . . . . . . . . . . . . . . . . . . . . . . . . . 20
Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Remote controlled seat positioning . . . . . . . . . . . . . . . . . . . . . 20
Dual sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Remote controlled sensor adjustments . . . . . . . . . . . . . . . . . . . . . . . 21
Remote controlled override of one or both sensor zones . . . . . . . . . . . . . 22
How to interpret the LED status indicator . . . . . . . . . . . . . . . . . . . 22
Automatic battery-saving mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
NightVision™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
FACT™— False Alarm Control and Test . . . . . . . . . . . . . . . . . . . 23
Smart AutoTesting™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Specific malfunction identification . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Automatic malfunction bypass . . . . . . . . . . . . . . . . . . . . . . . . 24
Multiple-event TotalRecall™ . . . . . . . . . . . . . . . . . . . . . . . . . 24
Smart prior intrusion attempt alert . . . . . . . . . . . . . . . . . . . . . . 25
1

Table of Contents(cont.)
AutoLock and AutoUnLock™ . . . . . . . . . . . . . . . . . . . . . . . . . 25
Smart trunk release option . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Smart Self-Powered Medallion Siren with Digital ComLink™ . . . . . . . . 25
Unbreachable Digital ComLink™ . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Smart-charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Low battery warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Personalized Siren Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Long-term chirp silencing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Remote controlled chirp muting . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
QuietChirps™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Siren duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Automatic Noise Abatement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Adding new remote controls . . . . . . . . . . . . . . . . . . . . . . . . . 26
How to erase lost or stolen remote controls . . . . . . . . . . . . . . . . . 26
SmartPowerUp™ II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Remote Engine Starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
How to remotely start/shutdown the engine . . . . . . . . . . . . . . . . . . . . 27
Diesel compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
To drive the vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
The AutoStart features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
ShortStop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Remote Starting DOs and DON’Ts . . . . . . . . . . . . . . . . . . . . . . . 29
Phone-in commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
How do the phone-in commands work? . . . . . . . . . . . . . . . . . . . 30
Your PIN code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
How to set a new PIN code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
How to send a phone-in command to IntelliPage . . . . . . . . . . . . . . 31
IntelliPage’s phone-in command vocabulary . . . . . . . . . . . . . . . . 32
Multiple phone-in commands . . . . . . . . . . . . . . . . . . . . . . . . . 34
What to do if your vehicle is stolen: the STOP command . . . . . . . . . . 33
User-selectable features . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
How to change a user-selectable feature . . . . . . . . . . . . . . . . . . . . . . 35
Step-by-step programming instructions . . . . . . . . . . . . . . . . . . . 35
EXAMPLE 1: Turn off siren sound number 2 . . . . . . . . . . . . . . . . . . . . . 36
EXAMPLE 2: Turn off siren sounds 4 and 6, then turn on QuietChirps . . . . . . . 36
Reset all features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Table of User-Selectable Features . . . . . . . . . . . . . . . . . . . . . 38-39
2

Standard Features of the IntelliPage
— Paging-Activated Features —
More than 10,000-Mile Remote Control Range
IntelliPage’s built-in PageMate™ interface lets you command security and
convenience features from any touch-tone telephone! Just call your regular pager
number, enter your secret security code, then simply spell out START, STOP,
or any of several other commands on the telephone keypad. Within seconds,
your system will respond to your command and your pager will confirm it. Best
of all, if you already have a pager, you’ll have no additional service charges.
✔Remote Engine Starting— Unlike all other remote engine starting systems,
which are limited to a few hundred feet at best, with IntelliPage, you just
phone-in a START command from anywhere in the world to safely start and
idles your vehicle’s engine for up to 30 minutes, allowing for pre-heating/cooling
of the passenger compartment. The parking lights flash and then stay on while
the engine idles for clear, on-going visual confirmation from a distance.
✔AutoShutDown™— If left unattended, IntelliPage automatically shuts down
the engine after 30 minutes. Of course, you may remotely shut down the
engine anytime you wish by merely phoning in a STOP command.
✔Automatic Safety Checks — Ensures that all of the following safety
conditions are met or your vehicle will not be remotely started:
•Transmission must be in park
•Engine and ignition must be off
•Engine must not be overheated
•Hood must be closed
✔Cold Weather Cranking — Automatically cranks the engine for up to 10
seconds or until it starts, whichever occurs first. If it does not start, or starts
and then stalls, the system will try to restart it up to two additional times.
✔Anti-Theft Measures — The car may be driven only after the system is disarmed
and the key is turned “ON.” If the engine was started remotely, it will be shut
down immediately if any of the following occurs:
•The alarm is triggered
•The transmission is moved out of the “PARK” position and/or the brake pedal is
pressed while the ignition switch is off
•Engine RPM exceeds a certain threshold while the ignition switch is off
3

— Paging-Activated Features (cont.) —
✔Ultimate Anti-Carjacking and Vehicle Recovery System — Carjackers may
be desperate, but not stupid. They know many vehicles today are equipped
with a “passive” anti-carjacking system that activates a minute or two after
the vehicle is carjacked. To avoid that trap, they may kidnap the driver for a
few miles until they are sure there is no anti-carjacking system. Needless to
say, if the vehicle is equipped with a “passive” anti-carjacking system that
activates while you are on board, your safety is imperiled. However, with
your IntelliPage system, all you need to do is simply wait until you are
released and only then safely page your vehicle and command it to stop.
When the criminal slows down for traffic or a turn, the engine will stop, the
siren will sound unceasingly and the parking lights will flash continuously
until you or the police recover your vehicle.
✔Intelligent, Uniquely Responsive AntiTheft Means — With the proliferation
of car alarms, car thieves have resorted to a low-tech yet clever ploy. After
they target a car, they bang on it to trigger the sensor. As soon as the siren
sounds, they hide. They repeat this again and again until the car owner turns
off the system by placing it in valet mode. Within seconds, the car is gone.
But with IntelliPage, you can successfully foil such attempts while keeping
your neighborhood quiet at night. How? Just a phone call to your system will
turn off the sensor(s) while keeping the rest of your security system and all
entry points armed to vigilently protect your car.
✔Arm or Disarm the Security System — A phone call is all it takes no matter
where you are.
✔Unlock the Doors — If you ever accidentally lock your keys inside your car,
don’t call a locksmith, call IntelliPage. Just enter your security code, then
spell out UNLOCK on the telephone keypad. Your IntelliPage will disarm the
security system and unlock the doors for you.
✔Accessory Activation — With a simple phone call, you can optionally do
anything from honking the car horn to opening or closing your convertible’s
motorized top.
— Additional Remote Engine Starting Features —
✔ShortStop™ — Now you won’t need to shut off the engine when stopping at
a convenience store or making a delivery). Just a press on the remote control
while the engine is still running and you can remove the keys, exit, remotely
lock the doors and arm the alarm without shutting down the engine.
4

— Additional Remote Engine Starting Features (cont.) —
✔AutoStart™ Features— IntelliPage provides these AutoStart features:
nBattery Mode — With a press on the remote control, you may command the system
to monitor the vehicle battery when you will be away for an extended period of
time. If the voltage drops below a preset level, the system will automatically start
the engine and recharge the battery. If needed, the process will repeat every eight
hours. AutoStart is automatically canceled as soon as the vehicle is driven.
nTemperature Mode — With a press on the remote, you may set IntelliPage to
AutoStart your vehicle if the engine temperature drops below 15°F (-9°C).
nDual-Mode — A press on the remote can set the system to monitor both the
engine temperature and the voltage level and automatically start the engine when
either the battery needs recharging or the temperature drops below 15°F (-9°C).
✔StarterGuard™— Prevents accidental grinding of the starter motor if you
inadvertently turn the ignition switch to the starter position while the engine
is running under the control of your IntelliPage.
✔Gasoline & Diesel Compatibility— The IntelliPage works with any
automatic transmission vehicle that has either a gasoline or diesel engine
(diesel engine vehicles require an optional adapter).
✔Automatic Transmission Required — The IntelliPage is intended exclusively
for automatic transmission vehicles.
— Remote Controlled Features —
✔A Pair of 4-Button/16-Channel Remote Controls — Fingertip command
from a typical range of 300 feet. Each remote has a unique high-gloss
rosewood finish that looks as smart as the electronics inside.
✔Anti-CodeGrabbing™ (ACG) with Random Code Encryption— When you
use a car alarm remote, it transmits a digital code to the alarm. A thief with a
code-grabber can record that code from hundreds of feet away, then play it back
when you’re gone to disarm the alarm and unlock the doors. Within seconds,
your car is just another theft statistic. Fortunately, Clifford’s Anti-CodeGrabbing
(ACG) randomly changes the code every time you press any of the remote
control buttons. Since the codes are selected by the system’s microprocessor
from an electronic file containing several trillion codes, the remote NEVER
sends the same code twice, and the control unit NEVER accepts the same
code twice. That makes code-grabbing useless against IntelliPage.
✔Remote Controlled Engine Start/Shutdown — A press of a button on the
remote will start or shut down the engine from a typical range of 300 feet.
5

— Remote Controlled Features (cont.) —
✔Remote Controlled Seat Positioning — If more than one person drives your
car, you can now remotely adjust the driver’s seat to your favorite position
before you even get to your car. When you use the remote control to disarm
the system, your IntelliPage will automatically activate your vehicle’s memory
seat setting. You can assign any of your car’s memory seat settings to each of
up to four different remote controls. For instance, when disarmed with your
remote control, you may set IntelliPage to automatically activate the vehicle’s
memory seat position #1, and when disarmed with your spouse’s remote
control, it will automatically activate memory position #2, and so on in any
combination you wish using up to four different remotes and four different
memory positions.
✔Remote Door Locking/Unlocking — No more fumbling with the keys in the
dark or bad weather! One press of a button on the remote simultaneously arms
the system and locks the doors. Another press disarms and unlocks. Or use
IntelliPage’s phone-in LOCK and UNLOCK commands.
✔Full-Time Remote Panic with Automatic Door Locking and Unlocking— If
you ever feel threatened, a press on the remote will sound the siren, flash the
parking lights and unlock the doors of your parked car for quick entry
without fumbling with the keys. If you ever need to panic the system while
driving, the siren will sound, the lights will flash and the doors will lock to
shield you from the assailant.
✔Remote Controlled Valet Mode— With just a press of a button on your
remote control, you can enter or exit valet mode for vehicle servicing or
attendant parking without having to relinquish your remote control. Parking
light flashes visually confirm valet mode entry and exit from a distance.
✔Remote Controlled Chirp Muting— When you remotely arm or disarm, the
siren “chirps” and the parking lights flash to confirm system status.
Whenever you wish, just a press on the remote will arm and disarm the
system silently. It’s perfect when parking at night in a quiet residential area.
✔Built-In Remote Headlight Activation — Just a press on the remote instantly
turns on the headlights for any duration you wish between one second and
two minutes.
✔Remote Controlled Courtesy Lighting — For your safety and convenience,
when you remotely disarm your IntelliPage, the interior lights turn on and stay
on until you turn on the ignition or for 30 seconds, whichever occurs first.
6

— Remote Controlled Features (cont.) —
✔A Pair of Remotely Adjustable Dual-Zone Sensors — The most common
cause of recurring false alarms is an improperly adjusted sensor. What’s
more, a sensor may require re-adjustment when conditions have changed, for
instance when leaving your car in a vibration-prone multi-story parking
structure. With Clifford’s innovative remote sensor adjustment, you can
adjust the sensor sensitivity setting any place, any time, without any tools and
from up to 50 feet away. You can adjust sensitivity up or down by up to 32
increments merely by pressing buttons on your remote control.
nDigital Dual-Zone Proximity Sensor IV™ — The two sensor zones provide full
perimeter protection: If someone is lurking near your car, the system sounds a
one-second warning tone, but if a thief leans into the passenger compartment
through an open window, the system instantly blasts the siren, flashes the parking
lights and immobilizes the starter and ignition system. You can adjust, test and set
sensitivity of each zone of this efficient microprocessor-controlled passenger
compartment sensor via a few presses on the remote control. To minimize current
draw, this new-generation radar sensor uses only 30% of the power required by
other radar sensors, yet provides better sensitivity and far more precise
discrimination between genuine threats to your vehicle and everyday
environmental conditions that cause other radar sensors to false alarm.
nDual-Zone Piezo Sensor™ — Just like the Digital Dual-Zone Proximity Sensor IV,
you can adjust and test sensitivity of each zone of this all-electronic
vibration/impact sensor via the remote. Unlike other vibration/impact sensors, the
sensitivity of the Dual-Zone Piezo Sensor stays where you set it regardless of time
or temperature. The warning zone of the Dual-Zone Piezo Sensor has a different
sound than that of the Dual-Zone Proximity Sensor for distinct identification.
nTonal Confirmation of Remote Sensor Adjustments — For the utmost in sensitivity
adjustment ease and instant feedback, just press a few buttons on the remote to
adjust the sensitivity of each zone of each of the two system sensors. That’s all
there is to it! Higher and higher pitched tones confirm each sensitivity increase,
lower and lower tones confirm each decrease.
nRemote Override of Each Proximity Sensor Zone — One press of a button on the
remote control overrides the Proximity Sensor IV’s perimeter warning zone when
you need to park in an area with heavy pedestrian traffic. A second press turns off
both zones for those times when you must leave a passenger or pet in the vehicle.
✔Remote Window/Sunroof Closure Capability — If your vehicle can close the
power windows/sunroof via the driver’s door key (including several models
of Mercedes Benz, BMW, Volkswagen and Jaguar), the system’s integrated
timer and an optional relay can be used to automatically close the power
windows and sunroof every time you arm the system with your remote control.
7

— Remote Controlled Features (cont.) —
✔Smart Remote Trunk Release Capability — An electronic interlock assures
the optional remote trunk release can be activated only when the system is
disarmed. To further prevent unintentional opening of the trunk, the interlock
also assures that the trunk release cannot be remotely activated while driving.
✔Patented Remote Control Code Learning — A few flicks of a switch lets
you match to the system up to 4 different 16-channel remote controls. Just as
easily, a lost or stolen remote control can be deleted from the system memory.
✔Multiple-Car Control — You can interface your 16-channel remote controls
with Clifford ACG systems on up to seven of your other vehicles.
— Unmatched Security, Safety & Convenience Features —
✔Built-In Two-Point AutoImmobilizer™ — For the utmost in theft prevention,
two AutoImmobilization relays interrupt both the starter and ignition while
the system is armed. This two-point immobilization is virtually unbreachable:
Even if a thief were to pull all the fuses or cut all the wires, both the starter
and ignition remain immobilized.
✔UltraSecure Coded Valet Mode™ — Other alarms use a so-called “hidden”
valet switch that any thief can find within seconds and flick to immediately
turn off the alarm. In contrast, Clifford’s UltraSecure Coded Valet Mode
provides remarkable security utilizing an attractive console-mounted switch.
But beauty is more than skin deep. This switch is easy to use and allows you
to set your own personal code with up to 1,000 different possibilities. And,
any time you wish, you can change your code. No thief can breach the
security of Clifford’s coded valet switch even if he tries entering codes at
random. Why? Because after three incorrect codes are entered, the system
immediately sounds its siren, flashes the indicator lights, shuts down the
engine (if it was remotely started), immobilizes the vehicle’s starter and
ignition systems and ignores for a certain time any more code entry attempts
. . . even if the thief were to actually stumble onto your secret code!
✔FACT™—False Alarm Control and Test — One of many patented Clifford
innovations, FACT absolutely, positively puts an end to recurring false alarms.
8

— Additional Security and Convenience Features (cont.) —
✔User-Selectable AutoLock™ with Smart ReLocking™— Automatically locks
the doors after you begin driving (at about 15-20 mph). If you stop for a
moment and a passenger enters or exits your car while the engine is running,
IntelliPage automatically relocks the doors after you accelerate. If you prefer,
you can set the system to automatically lock the doors the instant the ignition
is turned on, or you can turn off the AutoLock feature entirely.
✔User-Selectable AutoUnLock— Automatically unlocks the doors when the
ignition is turned off (this feature is user-selectable regardless of the
AutoLock setting).
✔User-Selectable NightVision™ Headlight Automation — All electronics for
this popular accessory are built-in to provide all these great features:
nSafety Above All™ — You’ll never again accidentally drive in the dark without
the headlights on nor forget to turn the headlights off after parking. For your safety
and that of other motorists, when driving at twilight, the car’s headlights
automatically turn on at dusk and switch off at dawn.
nPrecision Activation — The headlights are turned on or off only when necessary.
Briefly driving under a dark overpass in daylight or quickly passing through a
brightly lit area at night will not cause the headlights to switch on and off.
nUser-Selectable Automatic Post-Parking Illumination — For your safety when
parking at night, the headlights will stay on for your choice of any duration
between one second and 2 minutes (factory preset to 30 seconds) to light your way
in the dark. If you prefer not to have any post-parking illumination, but do want all
the other NightVision features, this one particular feature can be programmed off.
nComplete User Control — The NightVision circuitry enhances headlight
operation without interfering with normal operation. At any time, you may use the
vehicle’s headlight switch to override NightVision and turn on the headlights even
in broad daylight.
nRainCheck™ — When the windshield wipers are turned on, the IntelliPage
automatically turns on the headlights to increase your vehicle’s visibility to all
other drivers on the road. And you’ll never have to worry about accidentally
leaving the headlights on after parking.
✔Extended Accessory Power — After you park and turn off the ignition, the
IntelliPage will continue to provide power to your vehicle’s power windows,
car stereo and any other components on the vehicle’s accessory line until one
of the doors is opened or for five minutes, whichever occurs first.
9

— Additional Security and Convenience Features (cont.) —
✔Smart Self-Powered Siren with Unbreachable Digital ComLink™ —
Continuous two-way digital communication between the system’s control
unit and the siren assures that if, at any time, the system’s fuse is pulled or
any siren wire is cut while the system is armed, the siren will instantly
activate for five minutes. Yet when the system is disarmed and power is
interrupted, the siren will remain silent.
nSmart Self-Powered Circuitry — Unlike other battery-backed sirens, the
IntelliPage siren only draws power for its internal battery while you’re driving, so
it can’t drain the battery of your parked car like all other battery backup sirens.
nAutomatic Low Battery Warning — The siren will audibly warn you if its back-up
battery voltage is low or if its internal battery fails to hold a charge.
nPersonalized Siren Sounds™ — You may select any combination of 6 different
sound patterns for unmistakable recognition from a distance. So if you hear a
siren at a distance, you will know for sure whether or not it is your car.
nUltra-Reliability — Clifford Electronics’ unique design and rugged construction
ensure that the Smart Self-Powered MultiSound Medallion Siren delivers 10
times the reliability of conventional sirens.
nUser-Selectable Siren Duration — Your choice of a 30- or 60-second siren blast
when the alarm is triggered.
nPatented Automatic Noise Abatement — Automatically limits alarm sounding
to no more than five minutes even if a door is left open in the wake of an intrusion
attempt, then automatically resets and re-arms.
✔Enhanced User-Selectable AutoArming™ — Automatically arms itself
“passively” if you forget. May qualify you for an insurance discount (ask
your insurance company).
nAutoArming Enable/Disable — You may disable or re-enable the AutoArming
feature with just a few flicks of a switch.
nAutoArm & Lock™ — You may set the system to automatically lock the doors
every time the system AutoArms.
nVisual Indication — Two parking light flashes signal that the 30-second
countdown to AutoArming has started.
nUser-Selectable 15-Second Entry Delay — If you ever temporarily lose the use of
your remote controls, an entry delay allows you to enter the vehicle and turn on
the ignition without sounding the siren.
nInstant AutoArm Bypass — Just a quick turn of the ignition switch bypasses
AutoArming for one cycle — perfect when fueling the vehicle. AutoArming is
automatically restored the next time you park.
10

— Additional Security and Convenience Features (cont.) —
✔One-Step Reset of All User Features— A simple procedure using the
PlainView switch allows you to reset all user programmable features (except
programmed remotes and your secret valet code) to their factory presets.
✔SilentNight™ — This user-selectable feature automatically silences the
normal arm and disarm chirps at night, restores them in daylight.
✔QuietChirp™— User-selectable soft or full-volume arm/disarm chirps.
✔Long-Term Chirp Silencing— If you prefer, you may set the system to silence
the normal arm/disarm chirps on a long-term basis until you wish to turn them
back on.
✔Built-In Parking Light Flasher — The parking lights flash to confirm arming,
disarming, AutoArming countdown, remote valet entry and exit as well as
remote engine starting. For ongoing visual confirmation of engine idling, the
parking lights stay on.
✔Patented Smart AutoTesting™— Automatically tests all triggers and sensors
every time you remotely arm and warns you if you accidentally arm the
system with the hood, trunk or a door ajar. If there is a genuine trigger or
sensor malfunction, the system will specifically identify the problem, thereby
eliminating time-consuming and costly trouble-shooting.
✔Patented Malfunction AutoBypass™ with Automatic Monitoring — In the
unlikely event of a trigger or sensor malfunction, IntelliPage will
automatically bypass the malfunction and arm all other points to continue
relentless protection of the vehicle. If you simply left the hood, trunk or a
door open when you armed, just close it and the system will again monitor
that trigger point.
✔Multiple-Event TotalRecall™— The IntelliPage’s memory stores the identity
of the last eight trigger and sensor activations. This provides an invaluable
diagnostic means, since, whenever you wish, the system will visually identify
the activated triggers and sensors in reverse chronological order.
✔Patented Smart Prior Intrusion Attempt Alert — When you return to your
vehicle and disarm your IntelliPage, a special chirp and parking light flash
sequence will audibly and visually alert you from a distance if an intrusion
attempt was foiled while you were away. Your IntelliPage will even identify
the specific trigger or sensor that detected the intrusion attempt.
11

— Additional Security and Convenience Features (cont.) —
✔Advanced CMOS Microcomputers — Multiple, very large scale integration
(VLSI) microprocessors command all system functions more than 1,000,000
times per second, yet they draw less power than the vehicle’s clock.
✔High-Luminescence LED Status Indicator with Automatic Battery-Saving
Mode — Adds visual deterrence and identifies system status. To conserve
vehicle battery power (since the LED draws more current than the control
unit), if the system has remained continuously armed for 48 hours, the flash
rate will automatically slow to half the normal rate. If left continuously
armed for 96 hours, the blink rate will slow to one-quarter the normal rate.
✔Multiple Sensor/Trigger Inputs— Separate inputs for two sensors as well as
separate inputs for the doors, trunk and hood allow for precise trigger/sensor
identification.
✔Full-Time Programming Access— You can easily change the status of dozens
of user-selectable features at any time, even while driving. Clear, audible
signals confirm each feature selection and setting.
✔Patented SmartPowerUp™ II — When power to the system is disconnected,
the system’s non-volatile memory always remembers the last state (armed,
disarmed or valet mode) and returns to that state when power is restored. So
if a thief disconnects the power, the Smart Self Powered Medallion Siren will
instantly sound and the starter and ignition systems will remain immobilized.
If the thief then restores power in an attempt to start the car, the system will
re-arm and again sound the siren, flash the parking lights and continue its
immobilization the starter and ignition until you can retrieve your vehicle and
disarm the system via your remote control or by entering your secret valet code.
✔Lifetime Warranty — For as long as you own the vehicle, Clifford Electronics
will repair or replace the control unit and remote controls free of charge (see
warranty card for full details).
12

Welcome to the world of high-technology
vehicle security and convenience
Congratulations on the purchase of your IntelliPage vehicle
security/convenience system. Clifford Electronics has long been
recognized as the world’s leading manufacturer of high-technology vehicle
security systems and accessories. In fact, Clifford Electronics holds more
patents than all other vehicle security manufacturers combined. Buying
Clifford has always meant buying the best, and nowhere is our commitment
to technological innovation, reliability and quality more evident than in the
astounding top-of-the-line IntelliPage.
Your IntelliPage is loaded with protective features and lifestyle convenience
benefits that other car alarm companies don’t even have on their wish lists,
let alone their alarms. Remote engine starting is the most obvious and most
convenient feature of your IntelliPage, especially on those blisteringly hot
summer days and frigid winter mornings. Amazingly, you can invoke
IntelliPage’s remote starting feature via a press of a button on your remote
control from hundreds of feet away, or via a phone call from thousands of
miles away! There’s also Anti-CodeGrabbing (ACG) that fights off the latest
and most onerous threat from high-tech thieves. A thief equipped with a
code-grabber can record with total impunity the codes of any car alarm’s
remote control from up to several hundred feet away. As soon as the driver
arms his or her alarm and walks away, the thief simply plays back the code,
instantly disarming the alarm and unlocking the doors. It’s like giving the
thief your car keys. Code-grabbing will instantly defeat other brands of
remote controlled car alarms, regardless of whether they are equipped with
“anti-scanning” or “trillions of remote control codes” — but Clifford’s ACG
feature stops them dead in their tracks.
IntelliPage’s unique PlainView Coded Valet Switch ensures that no thief or
joy-rider can turn off your IntelliPage like they can with all other car alarm
brands. For total freedom from incorrectly adjusted sensors, there’s remote
controlled adjustment of the system’s dual-zone radar sensor and dual-zone
vibration/impact sensor. Plus there’s remote controlled valet mode, remote
controlled and phone-in sensor zone override, selectable automatic engine
starting if your car battery starts to die or the engine temperature drops
below freezing, complete headlight automation with remote headlight
activation, user-programmable MultiSound Medallion™ Siren that will blare
even if a thief disconnects power to your IntelliPage or even cuts all the siren
wires, smart automatic locking/unlocking if you ever “panic” the system,
full-time programming access (even while driving), and much, much more.
13

Your 4-button/16-channel remote controls
The 4-button/16-channel rosewood-style remote controls are ultra-sophisticated
miniature radio transmitters powered by a tiny 12-volt battery. Range is up to 300 feet.
A weak remote control battery will reduce the remote’s range. Electrical interference
and even sunspots can interrupt the signal from your remote to the system. If this
happens, repeatedly press the button (this works better than holding the button down).
You will use your remote control to arm and disarm the system, start and stop the
engine, lock and unlock the doors, activate the panic feature, adjust the sensors,
enable/exit valet mode, turn on the headlights, override one or both zones of the radar
sensor and command options such as a remote trunk release, garage door interface,
and/or other options.
How to use your keychain remote control
Your remote control can individually command up to 16 different system functions and
options. It’s like having a TV with 16 channels. You change channels (functions) with your
keychain remote control. But instead of putting 16 buttons on the remote control, we made it
easy: First, the button you use the most — button 1 to arm, disarm, lock and unlock — is
larger than the others. Buttons 2, 3 and 4 are the smaller buttons to the right, below and left
of button 1. The LevelShift button on the side of the remote control allows you to select
channels 5–16:
nTo transmit either channel 1, 2, 3 or 4:
Just press either button 1, 2, 3 or 4. For
instance, to transmit channel 3, press
button 3. While you transmit, the LED
indicator will blink once every second:
this indicates level 1.
nTo transmit either channel 5, 6, 7 or 8:
Press the LevelShift button once. This
shifts buttons 1–4 to level 2 (channels
5–8). Then press the desired button
within the next 7 seconds. For instance, to transmit channel 5, press the LevelShift
button once, then press button 1. While you transmit, you’ll notice that the LED
indicator blinks twice, pauses, blinks twice, etc.: this indicates level 2.
nTo transmit channel 9, 10, 11 or 12: Press the LevelShift button twice. This shifts
buttons 1–4 to level 3 (channels 9–12). Then press the corresponding button
within the next 7 seconds. For instance, to transmit channel 10, press the LevelShift
button twice, then press button 2. While you transmit, you’ll notice that the LED
blinks three times, pauses, blinks three times, etc.: this indicates level 3.
nTo transmit channel 13, 14, 15 or 16: Press the LevelShift button three times then
press the corresponding button. For instance, to transmit channel 15, press the
LevelShift button twice, then press button 3. While you transmit, you’ll notice that the
LED blinks four times, pauses, blinks four times, etc.: this indicates level 4.
NOTE: One second after you stop transmitting level 2, 3 or 4 (channels 5–16), the
remote control automatically returns to level 1 (channels 1–4).
14

What each button/channel does
Your IntelliPage remote controls come pre-programmed so that certain channels
command certain functions. The following chart indicates what each remote control
channel number does, and how to transmit each channel number.
Factory settings of the 16 remote control channels
Transmitting
channel
number: Causes the system to: Press the
LevelShift
button?
How
many
times?
Press
button
number
1arm or disarm and lock or unlock the doors no —1
2pop the trunk* (if the system is disarmed)
AND
turn on the headlights (if the system is armed)no —2
3silently arm or disarm no —3
4activate an optional accessory or, on some vehicles, automatically
close the windows and sunroof when you remotely arm* no —4
5remotely start or shutdown the engine yes once 1
6activate optional accessory or control a Clifford system on another car yes once 2
7activate optional accessory or control a Clifford system on another car yes once 3
8activate optional accessory or control a Clifford system on another car yes once 4
9remotely enter or exit valet mode (see page 19) yes twice 1
10
remotely turn off one or both Proximity Sensor zones
if the system is armed (see page 22)
AND
turn on the AutoStart mode previously selected
if the system is disarmed (see page 28)
yes twice 2
11 remotely adjust sensitivity of the Proximity Sensor’s
passenger compartment alarm zone (see page 21) yes twice 3
12 remotely adjust sensitivity of the Proximity Sensor’s
exterior warning zone (see page 21) yes twice 4
13 activate optional accessory or control a Clifford system on another car yes three
times 1
14 activate optional accessory or control a Clifford system on another car yes three
times 2
15 remotely adjust sensitivity of the Piezo Sensor’s
primary alarm zone (see page 21) yes three times 3
16 remotely adjust sensitivity of the Piezo Sensor’s
secondary warning zone (see page 21) yes three times 4
* May require additional wiring.
15

TO REMOTELY
ARM THE SYSTEM. . . Press button 1 (channel 1) once. You will hear two chirps and the
parking lights will flash twice. The dashboard LED will flash
repeatedly and the car doors will automatically lock. On certain
vehicles, if so wired, the power windows and sunroof will
automatically close.
TO REMOTELY
DISARM THE
SYSTEM. . . . . . . . . . .
Press button 1 (channel 1) again. One chirp and one parking light
flash confirms disarming. The doors will unlock and the interior
lights will turn on and stay on for 30 seconds or until you start the
engine, whichever occurs first. In addition, the system automatically
adjusts the driving position to the settings you have programmed
into your car’s memory seat button (see page 20 for further details).
TO SILENTLY
ARM OR DISARM
THE SYSTEM . . . . . . .
Press button 3 (channel 3). Your IntelliPage system will arm or
disarm with all the indications noted above except for the chirp
acknowledgments.
TO ACTIVATE
THE PANIC
FEATURE . . . . . . . . . .
Press button 1 for three seconds. The lights will flash repeatedly
and the siren will blare for 30 or 60 seconds (user-selectable), or
until you press button 1 again to turn it off. If the ignition is on
(indicating you are in the car), the doors will automatically lock to
prevent an assailant from entering. If the ignition is off, the doors
will unlock, allowing you to enter without fumbling with your keys.
TO REMOTELY
TURN ON THE
HEADLIGHTS . . . . . .
Button 2 (channel 2) controls an electronic interlock that lets you
separately command two options with the same channel: one when
the system is armed and another when disarmed. Pressing button 2
while the alarm is armed will turn on the headlights for any
duration you wish between one second and two minutes (factory
setting is 30 seconds; see User-selectable features on pages 35-39).
TO REMOTELY
OPEN THE
TRUNK RELEASE . . . .
Button 2 (channel 2) can control an optional remote trunk release
when the system is disarmed. Pressing button 2 while the alarm is
disarmed will open the trunk if you have this option installed.
TO REMOTELY
START OR
SHUTDOWN
THE ENGINE . . . . . . . .
Before attempting to remotely start the engine, please read the
sections Remote Engine Starting and Remote Starting DOs and
DON’Ts on pages 27-29. Channel 5 (LevelShift once, then button
1) instructs your IntelliPage to remotely start your vehicle’s
engine and any preset accessories (or to shut the engine down if it
is already running under the control of your IntelliPage). The
parking lights will flash twice to acknowledge your command,
then will light and stay lit while the engine idles for on-going
confirmation.
16

TO ACTIVATE
OTHER OPTIONS
REGARDLESS OF
ALARM STATE. . . . . . .
Button 4 (channel 4) and channels 5–8 and 13–14 (see How to
use your keychain remote control on page 14) can activate
accessories such as remote power window control, electric garage
door and entry gate opener(s), Clifford ACG systems on your
other vehicles, etc.
What about
channels
9 – 12, 15 & 16? . . . . .
Channels 9 through 12 and 15 and 16 control remote valet mode
entry/exit (see page 19) , remote override of one or both zones of the
system’s Proximity Sensor (see page 22), AutoStart (see page 28),
and remote adjustment of each of the two system sensors (see page
21).
How to interpret the chirps and parking light flashes
When you use the remote control, the system responds with chirps (unless the chirp muting
feature is turned on) and parking light flashes. These chirp/flash acknowledgments mean:
Chirps and/or flashes Meaning
1Your system is disarmed or you have remotely exited valet mode (see page 19)
2Your system is armed or you have remotely engaged valet mode (see page 19) or you
have signaled the system to start the engine (seeRemote Engine Starting on page 27)
2 and then 4 Armed but there is a door ajar (if there was a 5-sec. delay) or one of the sensors is
malfunctioning (if there was a 10-sec. delay) (see Smart AutoTesting on page 24)
3Disarmed but there was an intrusion attempt while you were away
(seeSmart prior intrusion attempt on page 25)
4Armed but the hood or trunk is ajar (see Smart AutoTesting on page 24),
or confirms remote override of the Proximity Sensor zone(s)
(seeRemote controlled override of one or both Proximity Sensor zones on page 22)
Anti-CodeGrabbing™ (ACG) with Random Code Encryption
A Clifford exclusive that protects you and your automobile from the most effective and
onerous car stealing device ever used by car thieves — a code-grabber. Code-grabbers
are far more effective and efficient than scanning. Unlike scanners that sequentially
transmit one digital code after another until they hit the correct code to disarm the alarm
(a process that may take minutes to years depending on the system’s total number of
codes), code-grabbers literally record, from hundreds of feet away, the code sent by your
car alarm remote control. Then the thief simply plays back the code when you’re gone,
instantly disarming the alarm and unlocking the doors. It’s like giving the thief your car
keys. Non-Clifford alarms can be defeated that easily. In contrast, Clifford systems with
ACG use complex digital signal processing and unbreachable encryption to randomly
change the digital code every time you use the remote control. Your remote will never
transmit the same code twice, and the control unit will never accept the same code
twice. Thus the code recorded and played back by the thief’s code-grabber will never be
accepted by your IntelliPage.
17