ClimaRad S-Fan+ User manual

Operating Instructions ClimaRad S-Fan+
(with Heating Element) Incl. Room Thermostat
The ClimaRad S-Fan+ can be operated via the control panel on the bottom of the unit in combination with
the paired room thermostat.
Operation ClimaRad S-Fan+
2022.001
Control panel
ClimaRad S-Fan+
heating
manual
filter
A U T O
comfort
Operation of the ClimaRad S-Fan+
!
Please note! The air supply opening must always remain open and unimpeded!
The ClimaRad S-Fan+ achieves optimal air quality through ventilation combined with heating. This unit can be
used in two different ways: Ventilate Only, and Heat and Ventilate.
Room thermostat

Press 4 seconds simultaneously
Press for 6 seconds
Function keys ventilate
Automatic control. Room ventilation is automatically controlled by your ClimaRad S-
Fan+, which ventilates based on CO measurement and RV. Press 2 to switch off the
heating function.
Comfort mode. The ClimaRad S-Fan+ preheats the outside air to 12ºC for a period of 8
hours.
Child lock. The child lock is switched on. Press and hold the
three buttons for 4 seconds to switch it off.
Air quality. Increase or decrease the desired air quality.
Heating. The S-Fan+ will heat the room to the temperature set on the room
thermostat. The room is ventilated based on CO.
Malfunction. A malfunction has occurred. Contact your
technician or housing corporation.
Messages
Dirty filter. Replace the air filter or contact your technician
or housing corporation. After replacement, press and hold
the + and – buttons for 6 seconds.
Pairing. The ClimaRad S-Fan+ can be linked to other
ClimaRad products. Press the buttons briefly and
simultaneously.
AUTO
Manual: manual ventilation with outside air:
You can set your desired ventilation speed using the + and - buttons on your control
panel. After a period of 4 hours, the ClimaRad S-Fan+ switches back to automatic
control. Use this function in summer, for example, when you want to lower the
temperature in your heated room by a few degrees at night (summer night
ventilation).
Press briefly and simultaneously
AUTO AUTO
Heating rate. Increase or decrease fan speed to heat faster or slower.
Pause/Off. Use this function if you (temporarily) do not want to ventilate. After a
period of 4 hours, the ClimaRad S-Fan+ switches back to the automatic setting. When
the button is pressed for 5 seconds, the unit switches off. In case of emergencies you
can use this function to switch off the device.
Child lock. The child lock will be activated when you press and hold the three buttons
on the panel for 4 seconds.
Function keys heating and ventilation
Function keys general
ClimaRad B.V. - Lübeckstraat 25 - 7575 EE - Oldenzaal - NL - [e-mail] - www.climarad.co.uk - tel. [phone]
Switch off