CLIQSTUDIOS RTA Sink Base Cabinet User manual

RTA – Assembly Instructions
Sink Base Cabinet

SINK BASE CABINET ASSEMBLY
INSTRUCTI NS
1. Lay cabinet Front Face on a soft working surface with dovetail
grooves facing upward. The grooves will be for the Bottom Panel
and Side panels.
. Insert the Side Panels into the grooves on Front Face making sure
clips are lined up and fully engaged.
3. Insert the Bottom Panel into the grooves of Side Panels.
4. Insert Back Panel into the grooves on Side Panels and Bottom Panel
until ush.
5. Place each of the 4 iron corner braces in each top corner of the
cabinet and use screws to secure the braces to the panels.
6. Screw the Front/Back Toe Kick Plate to the Side Panels making sure
clips are fully engaged.
RIGHT/LEFT SIDE PANEL 2
BOTTOM PANEL 1
BACK PANEL 1
FRONT FACE 1
TOE KICK PLATE 2
© CliqStudios.com