CLIQSTUDIOS RTA Diagonal Corner Sink Base Cabinet User manual

RTA - Assembly Instructions
Diagonal Corner Sink Base Cabinet

DIAGONAL CORNER SINK BASE CABINET
ASSEMBLY INSTRUCTIONS
RIGHT/LEFT SIDE PANEL 2
RIGHT/LEFT BACK SIDE PANEL 2
TOP/BOTTOM PANEL 1
1. Lay cabinet Front Face on a soft working surface with dovetail
grooves facing upward. The grooves will be for the Bottom Panel
and Side panels.
2. Insert the Front Side Panels into the dovetail grooves on Front Face
making sure dovetails are lined up and fully engaged.
3. Insert Top/Bottom Panel into the grooves on Front Face making sure
clips are lined up and fully engaged.
4. Insert Back Side Panel into the grooves on Side Panels until ush.
5. Insert Back Panel into the dovetail grooves on Front Side Panels until
ush.
6. Screw the Back Side Panel to the Back Panel from the back of the
cabinet.
7. Place each of the 4 metal corner braces in each top comer of the
cabinet and use screws to secure the braces to the panels.
8. Attach the Toe Kick Plate to Side Panels using provided clips.
© CliqStudios.com
BACK PANEL 1
FRONT FACE 1
TOE KICK PLATE 1