Coast Cycles Buzzraw Raceplates User manual

RACE PLATES

CONTENT
01 Safety
02 Symbols Used
02 Tools Required
03 Front Race Plate Installation
07 Side Race Plates Installation

01
SAFETY
NOTE: We strongly urge you to read this Assembly Manual in its entirety first. Refer to the
appropriate sections for any issue which you don’t completely
understand. Please note that not all Raceplates have the features described in
this Assembly Manual.

02
1 2 3
L=R
DETAIL
The threads
Overtightened are stripped.
Use wrench
Tighten screw
gently
Correct Wrong
Assemble in the
specified order
Assemble the same
for the other side
Pay attention here Detail view Assembly view
SYMBOLS USED
TOOLS REQUIRED
Wrench: 10:0 (mm)
(Optional)
Scissor Allen: 2.0, 4.0, 5.0 (mm) Adjustable Wrench

03
Wrench: 10.0(mm)
(Optional)
1
2
3
FRONT FENDER NO. DESCRIPTION
1Front Race Plate (x1)
2Front Race Plate Bracket (x2)
3Hex Socket Head Allen Bolt M3* (x2)
4Washer M3* (x2)
5Nut M3* (x2)
6Hex Socket Head Allen Bolt M6* (x4)
7Nut M6* (x2)
8Washer M6* (x2)
DETAIL
Allen: 2.0,4.0 &
5.0(mm)
Adjustable Wrench
Scissors
TOOL REQUIRED
Front Race Plate Bracket (x2)
Washer And Nut M3* (x4)
Hex Socket Head Allen Bolt M3* (x4)
Position the Brackets with the Front Race Plate
DETAIL
8
7
6
4
5
FRONT RACE PLATE INSTALLATION

04
Washer And Nut M3* (x1)
Hex Socket Head Allen Bolt M3* (x1)
DETAIL
DETAIL
FRONT RACE PLATE INSTALLATION
Bolt through the Hex Socket Head Allen Bolt M3* with a Washer M3* into the Front Race
Plate and tighten with a Nut M3* using an Allen Key 2.0 and an Adjustable Wrench
Do the same for the other three holes
L=R

05
Washer And Nut M6* (x1)
Hex Socket Head Allen Bolt M6* (x1)
DETAIL
Bolt through the Hex Socket Head Allen Bolt M6* with a Washer
M6* into the top crown of the fork and then through bracket
DETAIL
Do the same for the bottom crown of thje fork
L=R
FRONT RACE PLATE INSTALLATION

06
DETAIL
Tighten with a Nut M6* using an Allen Key 5.0 and a
10.0(mm) Wrench
DETAIL
Do the same for the rest of the mounting points
L=R
FRONT RACE PLATE INSTALLATION

07
1
FRONT FENDER NO. DESCRIPTION
1Left Side Race Plate (x1)
2Right Side Race Plate (x1)
3Left Side Race Plate Bracket (x1)
4Right Side Race Plate Bracket (x1)
5Hex Socket Head Allen Bolt M6* (x4)
6Washer M6* (x4)
7Nut M6* (x4)
DETAIL
Allen:4.0 & 5.0(mm)
Scissors
TOOL REQUIRED
Washer And Nut M6* (x1)
Hex Socket Head Allen Bolt M6* (x1)
Position the Bracket with the Side Race Plate (Right side)
DETAIL
34
2
5
6
7
SIDE RACE PLATES INSTALLATION
Wrench: 10.0(mm)
(Optional)

08
Bolt through the Hex Socket Head Allen Bolt M6* with a Washer
M6* into the Right Side Race Plate and then through the Bracket
DETAIL
Remove the M6* Bolt from the Buzzraw’s top tube using an Allen Key 5.0
DETAIL
SIDE RACE PLATES INSTALLATION

09
SIDE RACE PLATES INSTALLATION
Tighten the M6* Bolt through the Race Plate Bracket then onto the
Buzzraw’s top tube using an Allen Key 5.0
DETAIL

10
DETAIL
Bolt through the Hex Socket Head Allen Bolt M6* with a Washer M6* into
the Right Side Race Plate onto the Buzzraw using a Allen Key 5.0
DETAIL
SIDE RACE PLATES INSTALLATION
Washer M6* (x1)
Hex Socket Head Allen Bolt M6* (x1)
Do the same for the Left Side Race Plate
L=R

11
DETAIL
DETAIL
SIDE RACE PLATES INSTALLATION