Coaster 100135 User manual

ASSEMBLY INSTRUCTION
100135
BAR TABLE
COASTER FINE FURNITURE
Page 1 of 7
2013/06/04
PAGE 1 OF 6

1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly
Warning !
1. Don't attempt to repair or modify parts that are broken or defective. Please contact
the store immediately
2. This product is for home use only and not intended for commerecial establishment.
NO DESCRIPTION FIGURE Q'TY
ALLEN
ALEFT LEG 1PC 1 BOLT-MEDIUM 22PCS
ALLEN
2 BOLT-SMALL 4PCS
BRIGHT LEG 1PC
3BOLT 4PCS
CFRONT FRAME 1PC 4THICKNESS WASHER 4PCS
4PCS
DHANGER BACKET 1PC
FLOOR LEVELER 4PCS
E BOTTOM SUPPORT 1PC ALLEN
7BOLT-LARGE 3PCS
FBOTTOM GLASS 2PCS
SUPPORT 8NUT 3PCS
GTOP GLASS 1PC
10 PLASTIC WASHER 3PCS
HBOTTOM GLASS 2PCS
1PC
ISHELF GLASS 1PC
12 HEXAGONAL KAY
HARDWARE PACKAGE:
3PCS
ALLEN KEY
11
6
1PC
5 SUCTION CUP
9WASHER
ASSEMBLY TIPS
ASSEMBLY INSTRUCTION
PARTS IDENTIFICATION:
ITEM:100135
ASSEMBLY INSTRUCTION
PAGE 2 OF 6

STEP1: Please take out FRONT FRAME(C).
STEP2: Attach FLOOR LEVELERS (6) onto LEFT LEG (A) and RIGHT LEG (B).
Assemble the LEFT LEG (A) and RIGHT LEG (B) onto the FRONT FRAME (C)
using ALLEN BOLT - MEDIUM (1). Next, assemble the HANGER BRACKET (D)
using ALLEN BOLT - MEDIUM (1). And finally attach the BOTTOM SUPPORT (E)
using the ALLEN BOLT - SMALL (2).
STEP2
STEP1
ITEM:100135
ASSEMBLY INSTRUCTION
PAGE 3 OF 6

STEP3: Insert SUCTION CUP(5) into
BOTTOM GLASS(H) using BOLT-MEDIUM(1).
STEP3
STEP4: Assemble the BOTTOM GLASS SUPPORT(F)
using THICKNESS WASHER(4) and BOLT(3).
STEP4
ITEM:100135
ASSEMBLY INSTRUCTION
PAGE 4 OF 6

STEP5
STEP5: Attach TOP GLASS (G) and SHELF GLASS(I) using
ALLEN BOLT - MEDIUM (1). Fully tighten all screws.
FINISH
ITEM:100135
ASSEMBLY INSTRUCTION
PAGE 5 OF 6

To attach two pieces together, insert PLASTIC WASHER (10) to the NUT (8) as well as the WASHER (9) and tighten
using ALLEN BOLT - LARGE (7).
ITEM:100135
ASSEMBLY INSTRUCTION
PAGE 6 OF 6