Coaster 222724 User manual

222724
MIRROR
ASSEMBLY INSTRUCTIONS
www.coastercompany.com
COASTER FINE FURNITURE
PAGE 1 OF 4
REVISION 0: 10/30/2018

QTY
1PC
1PC
2PCS
QTY
4PCS
4PCS
8PCS
8PCS
1PC
A
PAGE 2 OF 4
MIRROR
* FROM BOX ITEM #222723
HARDWARE IDENTIFICATION
HOWEVER, MANUFACTURER DOES NOT PROVIDE THIS ITEM.
3
FIGURE
PART NAME
ITEM :
222724
FIGURE
PARTS IDENTIFICATION
ASSEMBLY TIME 10 MINUTES
MIRROR SUPPORT
NOTE : PHILLIPS HEAD SCREW DRIVER IS REQUIRED IN THE ASSEMBLY PROCESS;
C
(PACKED WITH MIRROR)
(M6 x 40mm - BLK)
(M6 x 35mm - BLK)
2
LOCK WASHER
(1/4" - RBW)
BDRESSER
HARDWARE NAME
4
ALLEN WRENCH
(M4 x 65mm - BLK)
5
1SHORT BOLT
(1/4"ID x 19mm - BLK)
FLAT WASHER
LONG BOLT
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
!
Warning!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
2. This product is for home use only and not intended for commercial establishments.
www.coastercompany.com
ASSEMBLY INSTRUCTIONS

STEP 1
STEP 2
ITEM :
222724
PAGE 3 OF 4
www.coastercompany.com
ASSEMBLY INSTRUCTIONS
C
ARROW MARKING FACING UPWARDS
**BACK VIEW**
C
A
5
1
3
4

STEP 3
STEP 4
ITEM :
222724
COMPLETE
PAGE 4 OF 4
www.coastercompany.com
ASSEMBLY INSTRUCTIONS
**BACK VIEW**
A
B
C
A
B
ARROW MARKING MUST
BE ALIGNED.
2
35 4