Coaster 109451 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
109451
Dining Table
Date :
10/18/2019
PAGE 1 OF 5
COASTERFURNITURE.COM

ITEM:109451 (B1-B2)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME 30 MINUTES
PARTS IDENTIFICATION
B1 ( BOX 1)
A top glass 1PCS
B2 ( BOX 2)
B Base 1PCS
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
PAGE 2 OF 5 COASTERFURNITURE.COM

ITEM:109451 (B1-B2)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the
store immediately.
2. This product is for home use only and not intended for commercial establishments.
HARDWARE IDENTIFICATION
Z-B2 (BOX 2) - HARDWARE PACK IS LOCATED IN 109451 (B2)
1ALLEN WRENCH
6mm 1PC
2SHORT BOLT
(M6*40mm) 4PCS
3Flat washer
(Dia10mm) 4PCS
4plastic leg
(Dia 4*8mm) 4PCS
Hardware pack is located in 109451 B2
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
PAGE 3 OF 5 COASTERFURNITURE.COM

ITEM:109451 (B1-B2)
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
PAGE 4 OF 5 COASTERFURNITURE.COM

ITEM:109451 (B1-B2)
PAGE 5 OF 5 COASTERFURNITURE.COM