Coaster 110293 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
110293
Dining Arm Chair
REVISION 0 : 08/31/2020 COASTERFURNITURE.COM
PAGE 1 OF 3

ITEM:110293
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME
HARDWARE IDENTIFICATION
NOTE:
Quantities shown are for one chair.
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
B LEFT BACK LEG 1PC
1BOLT
(Ø 1/4 x 13 x 63mm - RBW) 8PCS
2LOCK WASHER
(Ø 1/4 x 10 x 1.1mm - RBW)
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
15 MINUTES
PARTS IDENTIFICATION
A SEAT AND BACK 1PC
C RIGHT BACK LEG 1PC
D FRONT LEG 2PCS
4ALLEN WRENCH
(4 x 60mm - RBW) 1PC
8PCS
3FLAT WASHER
(Ø 1/4 x 2 x 22mm - RBW) 8PCS
PAGE 2 OF 3

STEP 2
ITEM:110293
ASSEMBLY INSTRUCTIONS
STEP 1
COASTERFURNITURE.COM
PAGE 3 OF 3
PAGE 3 OF 3
STEP 3
COMPLETE

ITEM:110293
COASTERFURNITURE.COM
Note :Dimension tolerance ±5%