Coaster 207492 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
207492
Nightstand
REVISION 0 : 04/27/2022
PAGE 1 OF 2 COASTERFURNITURE.COM

ITEM: 207492
ANTI-TIPPING INSTALLMENT INSTRUCTIONS
This tip restraint must be attached to a wall STEP 2
stud using long screw enclosed.
STEP 1
STEP 3
FURNITURE TIPPING RESTRAINT
WARNING
Injury may result from tipping furniture.
This restraint may protect against tipping furniture.
Do not allow children to climb on furniture.
This restraint is not a substitute for proper adult supervision.
Failure to detach this restraint before moving the furniture may result in injury and damage.
Locate the other bracket on the wall over a wall
stud and two inches below the mounting bracket
secured to the back of the furniture. Attach the wall
stud using the long screw provided, through the
smaller hole.
Attach a bracket securely to the back top rail of
the furniture using short screw provided, through
the smaller hole.
Place the furniture into position so both mounting brackets are vertically in line. Lace the end of the
restraint strap through the larger hole in each mounting bracket. Bring both ends together and slide the
flat end through the locking end and draw it through until all slack is removed. Confirm that the strap is
securely laced and locked.
PAGE 2 OF 2 COASTERFURNITURE.COM

ITEM:207492
COASTERFURNITURE.COM
Inner Size of Drawer : 22.50"W X 12.75"D X 2.50"H X 0.50"T
Note: Dimension tolerance ±5%
20.50"
17.75"
26.00"
7.25"
10.75"
15.00"
26.00" 15.00"
6.00"