Coaster Bench 501156 User manual

R
FINE FURNITURE
ASSEMBLY INSTRUCTION
COASTER FINE FURNITURE
www.coastercompany.com
2013/12/027
Page 1 of 4
501156
BENCH
2014/7/25

Page 2 of 4
Assembly Instruction
PARTS IDENTIFICATION:
R
FINE FURNITURE
www.coastercompany.com
ASSEMBLY TIPS:
1.Remove hardware from box and sort by size.
2.Please check to see that all hardware and parts are present prior to start of assembly.
3.please follow attached instructions in the same sequence as numbered to assurefast &
easy assembly.
Warning!
1.Don't attempt to repair or modify parts that are broken or defective.Please contsct the
store immediately.
2.This product is for home use only and not intended for commercial estabalishment.
ITEM:
ASSEMBLY INSTRUCTION
(A)
BASEÿÿ
1PC
(B)
(C) 2PCS
(D)
CUSHION
CUSHION
SUPPORT
2PCS
1PC
CONNECTION ROD
501156
CUSHION
FRAME
CROSSBAR
SIDE

Page 3 of 4
R
FINE FURNITURE
www.coastercompany.com
ITEM:
ASSEMBLY INSTRUCTION
1 6pcs
SCREW Φ
ALLEN WRENCH Φ1/4*66mm
2
3
4 1pc
16PCS
STEP 1:
16pcs
Z HARDWARE PACKAGE:
DESCRIPTION FIGURE QTY
NO
ALLEN BOLT Φ1/4*14mm
4pcs
4*40mm
LEVERLER Φ1/4*10mm
501156
Step 1: Place the cushion (A) upside down on a soft surface.
Then align and attach the cushion frame (B) to the cushion (A)
using the screws (1) tighten with the screw driver (NOT INCLUDED)
You will need two people for this installation. And will take about thirtyfive minutes.

Page 4 of 4
www.coastercompany.com
ITEM: 501156
ASSEMBLY INSTRUCTION
STEP 2: Align and attach the crossbar (C) to the side (D)
using allen bolt (2) tighten with allen wrench. Then screw four
levelers into bottom of the bases.
STEP 3: Align and holes of the base to them of cusion support
and tighten them up with bolt and allen wrench.