Coaster 222964 User manual

COASTERFURNITURE.COM
222964
Mirror
PAGE 1 OF 3
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
REVISION 0 : 10/03/2019

ITEM:222964
COASTERFURNITURE.COM
PAGE 2 OF 3
PARTS IDENTIFICATION
AMIRROR 1PC
BDRESSER
*FROM BOX ITEM
#222963
1PC
CMIRROR SUPPORT
(PACKED WITH DRESSER) 2PCS
HARDWARE IDENTIFICATION
18PCS
FLAT HEAD SCREW
(M4 x 32mm - BLK)
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
NOTE:
10 MINUTES
ASSEMBLY TIME
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
WARNING!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.

COASTERFURNITURE.COM
PAGE 3 OF 3
ITEM:222964
STEP 1
ASSEMBLY INSTRUCTIONS
1
B
A
C
UP
Screw Driver
A
B
C
STEP 2
COMPLETE

40.2"
16.8"
40.2"
35.2"
59.1"
34.3"
34.3"
COASTERFURNITURE.COM
ITEM:222964
NOTE : DIMENSION TOLERANCE ±5%
3.9"
25.2"
8.5"