Coaster 400415T User manual

www.coastercompany.com
400415T (B1 & B2)
TWIN SIZE BED
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
REVISION 0 : 12/20/2016
PAGE 1 OF 2

www.coastercompany.com
ITEM : 400415T (B1 & B2) ASSEMBLY INSTRUCTIONS
PAGE 2 OF 2
1 PC
BOLT
18 PCS
2
3
4
4 PCS
6 PCS
HEADBOARD
C
B
1PC
A
D
PARTS IDENTIFICATION HARDWARE IDENTIFICATION
1PC
1 SET
BED RAIL
ROLL SLAT
(13 PCS)
2PCS
Warning !
1. Don't attempt to repair or modify parts that are broken or defective. Please contact
the store immediately.
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIPS :
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast &
easy assembly.
ASSEMBLY TIME 20 MINUTES
B1 (BOX 1) Z-B2 (BOX 2)-HARDWARE PACK IS LOCATED IN 400415T (B2)
NOTE : PHILLIPS HEAD SCREW DRIVER IS REQUIRED IN THE ASSEMBLY
PROCESS; HOWEVER MANUFACTURER DOES NOT PROVIDE THIS ITEM.
SCREW
B2 (BOX 2)
STEP-1 STEP-2
Complete
WOOD DOWEL
ALLEN WRENCH
5
BARREL NUT 8 PCS
FOOTBOARD