Cobalt Digital Inc BBG-1070-QS User manual

2506 Galen Drive
Champaign, IL 61821
Voice 217.344.1243 • Fax [phone]
www.cobaltdigital.com
Product Manual
BBG1070QS-OM (V1.8)
Cobalt Digital Inc.
3G/HD/SD-SDI/CVBS Standalone Expandable Multiviewer
with Advanced On-Screen Graphics
BBG-1070-QS
BBG-1070-QS

Copyright
©Copyright 2017, Cobalt Digital Inc. All Rights Reserved.
Duplication or distribution of this manual and any information contained within is strictly prohibited without the express written
permission of Cobalt Digital Inc. This manual and any information contained within, may not be reproduced, distributed, or
transmitted in any form, or by any means, for any purpose, without the express written permission of Cobalt Digital Inc.
Reproduction or reverse engineering of software used in this device is prohibited.
Disclaimer
The information in this document has been carefully examined and is believed to be entirely reliable. However, no responsibility
is assumed for inaccuracies. Furthermore, Cobalt Digital Inc. reserves the right to make changes to any products herein to improve
readability, function, or design. Cobalt Digital Inc. does not assume any liability arising out of the application or use of any
product or circuit described herein.
Trademark Information
Cobalt®is a registered trademark of Cobalt Digital Inc.
openGear®is a registered trademark of Ross Video Limited. DashBoard™ is a trademark of Ross Video Limited.
Dolby®is a registered trademark of Dolby Laboratories, Inc. Other product names or trademarks appearing in this manual are the
property of their respective owners.
Utah™ and Utah Scientific™ are trade names of Utah Scientific.
Image Video™ is a trade name of Image Video.
PESA™ is a trade name of PESA.
TSL™ is a trade name of TSL Professional Products Ltd.
Congratulations on choosing the Cobalt®BBG-1070-QS 3G/HD/SD-SDI/CVBS Standalone Expandable
Multiviewer with Advanced On-Screen Graphics. The BBG-1070-QS is part of a full line of modular
processing and conversion gear for broadcast TV environments. The Cobalt Digital Inc. line includes video
decoders and encoders, audio embedders and de-embedders, distribution amplifiers, format converters, remote
control systems and much more. Should you have questions pertaining to the installation or operation of your
BBG-1070-QS, please contact us at the contact information on the front cover.
Manual No.: BBG1070QS-OM
Document Version: V1.8
Release Date: February 22, 2017
Applicable for
Firmware Version
(or greater): v1.247
Description of
product/manual
changes:
- Update manual for latest v1.247 functionality. This includes new
Cascade Config multi-device configurator feature described in this
manual.
BBG1070QS-OM (V1.8)

BBG1070QS-OM (V1.8) BBG-1070-QS PRODUCTMANUAL i
Table of Contents
Chapter 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Overview ................................................................................................................ 1-1
Cobalt Reference Guides........................................................................................ 1-2
Manual Conventions............................................................................................... 1-2
Warnings, Cautions, and Notes .................................................................. 1-2
Labeling Symbol Definitions...................................................................... 1-3
Safety and Regulatory Summary............................................................................ 1-3
Warnings..................................................................................................... 1-3
Cautions...................................................................................................... 1-3
EMC Compliance Per Market .................................................................... 1-3
BBG-1070-QS Functional Description .................................................................. 1-4
BBG-1070-QS Input/Output Formats ........................................................ 1-4
Video Processing Description .................................................................... 1-4
Audio Processor Description...................................................................... 1-7
Cascading (Multi-Device) BBG-1070-QS
Operation and Setup Overview................................................................. 1-8
User Control Interface .............................................................................. 1-11
Technical Specifications....................................................................................... 1-11
Warranty and Service Information ....................................................................... 1-13
Cobalt Digital Inc. Limited Warranty....................................................... 1-13
Contact Cobalt Digital Inc.................................................................................... 1-14
Chapter 2 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Overview ................................................................................................................ 2-1
Installing the BBG-1070-QS .................................................................................. 2-1
Installing Using BBG-1000-TRAY Optional Mounting Tray ................... 2-1
BBG-1070-QS Unit Dimensions................................................................ 2-2
Rear Panel Connections.......................................................................................... 2-2
Chapter 3 Setup/Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Overview ................................................................................................................ 3-1
BBG-1070 Front Panel Display and Menu-Accessed Control............................... 3-1
Connecting BBG-1070 To Your Network.............................................................. 3-3
Finding a BBG-1070 Device in DashBoard............................................... 3-4
Control and Display Descriptions........................................................................... 3-5
Function Submenu/Parameter Submenu Overview.................................... 3-5
Web User Interface..................................................................................... 3-6
Display Theme............................................................................................ 3-7

ii BBG-1070-QS PRODUCT MANUAL BBG1070QS-OM (V1.8)
Checking BBG-1070-QS Device Information........................................................ 3-8
BBG-1070-QS Function Menu List and Descriptions............................................ 3-9
Input Routing ........................................................................................... 3-10
PIP Clone Global Controls ....................................................................... 3-13
PIP Layout Controls ................................................................................. 3-14
PIP ARC/Borders Controls ...................................................................... 3-19
Tally Lamp Insertion Controls ................................................................. 3-21
UMD/Identification Text Insertion Controls ........................................... 3-23
Audio Meter Overlay Controls ................................................................. 3-31
Reticules Controls .................................................................................... 3-35
Output Format Controls ........................................................................... 3-38
Output Audio Routing/Controls ............................................................... 3-40
Cascade Config Setup Controls ............................................................... 3-41
Protocols (Router Integration) Controls ................................................... 3-46
GPI Setup Controls .................................................................................. 3-48
Event Actions Setup Controls .................................................................. 3-49
Output Preview ......................................................................................... 3-51
User Graphic Overlay Insertion Controls ................................................. 3-52
Clock (Wall-Clock Time/LTC) Controls ................................................. 3-53
Presets ...................................................................................................... 3-54
Admin (Log Status/Firmware Update) ..................................................... 3-58
User Log ................................................................................................... 3-59
Uploading Firmware Using Web Interface and GUI............................................ 3-60
Front Panel User Menus........................................................................................ 3-61
Troubleshooting .................................................................................................... 3-61
Error and Failure Indicator Overview....................................................... 3-61
Basic Troubleshooting Checks.................................................................. 3-63
BBG-1070-QS Processing Error Troubleshooting.................................... 3-63
In Case of Problems .................................................................................. 3-65

BBG1070QS-OM (V1.8) BBG-1070-QSPRODUCTMANUAL 1-1
Chapter 1
Chapter 1 Introduction
Overview
This manual provides installation and operating instructions for the
BBG-1070-QS 3G/HD/SD-SDI/CVBS Standalone Expandable Multiviewer
with Advanced On-Screen Graphics unit (also referred to herein as the
BBG-1070-QS).
•Information in this manual describes technical aspects, installation,
setup/integration, and full operating instructions for this product
intended for engineering personnel.
•“BBG-1070-QS Operators’s Guide”is limited to user operating
instructions for using the BBG-1070-QS PiP user interface to
manipulate and set up the quint-split/multiviewer functions of this
product. This guide (which is furnished with this product) is intended
for operating personnel who will be using the BBG-1070-QS to
manipulate and configure the multi-split PiP multiviewer functions
(“day-to-day use”) of this product. It is recommended that this
condensed guide be made available to operating personnel.
This manual consists of the following chapters:
•Chapter 1, “Introduction”–Provides information about thismanual
and what is covered. Also provides general information regarding the
BBG-1070-QS.
•Chapter 2, “Installation”–Provides instructions for installing the
BBG-1070-QS and setting up its network access.
•Chapter 3, “Setup/Operating Instructions”–Provides overviews
of operating controls and instructions for using the BBG-1070-QS.
This chapter contains the following information:
•Cobalt Reference Guides (p. 1-2)
•Manual Conventions (p. 1-2)
•Safety and Regulatory Summary (p. 1-3)
•BBG-1070-QS Functional Description (p. 1-4)
•Technical Specifications (p. 1-11)
•Warranty and Service Information (p. 1-13)
•Contact Cobalt Digital Inc. (p. 1-14)

1Cobalt Reference Guides
1-2 BBG-1070-QS PRODUCT MANUAL BBG1070QS-OM (V1.8)
Cobalt Reference Guides
From the Cobalt®web home page, go to Support>Reference Documents for
easy to use guides covering network remote control, device firmware updates,
example processing UI setups and other topics.
Manual Conventions
In this manual, display messages and connectors are shown using the exact
name shown on the BBG-1070-QS itself. Examples are provided below.
•Device display messages are shown like this:
•Connector names are shown like this: SDI IN A
In this manual, the terms below are applicable as follows:
•BBG-1070-QS refers to the BBG-1070-QS 3G/HD/SD-SDI/CVBS
Standalone Expandable Multiviewer with Advanced On-Screen unit.
•Frame refers to the HPF-9000, OG3-FR, 8321, or similar 20-slot
frame that houses Cobalt®or other cards.
•Device and/or Card refers to a Cobalt®or other card.
•System and/or Video System refers to the mix of interconnected
production and terminal equipment in which the BBG-1070-QS and
other cards or units operate.
•Functions and/or features that are available only as an option are
denoted in this manual like this:
Warnings, Cautions, and Notes
Certain items in this manual are highlighted by special messages. The
definitions are provided below.
Warnings
Warning messages indicate a possible hazard which, if not avoided, could
result in personal injury or death.
Cautions
Caution messages indicate a problem or incorrect practice which, if not
avoided, could result in improper operation or damage to the product.
Notes
Notes provide supplemental information to the accompanying text. Notes
typically precede the text to which they apply.
BBG-1070-QS

BBG1070QS-OM (V1.8) BBG-1070-QS PRODUCT MANUAL 1-3
Introduction Safety and Regulatory Summary
Labeling Symbol Definitions
Safety and Regulatory Summary
Warnings
Cautions
EMC Compliance Per Market
Important note regarding product usage. Failure to observe may result in
unexpected or incorrect operation.
Electronic device or assembly is susceptible to damage from an ESD
event. Handle only using appropriate ESD prevention practices.
If ESD wrist strap is not available, handle only by edges and avoid
contact with any connectors or components.
Symbol (WEEE 2002/96/EC)
For product disposal, ensure the following:
•Do not dispose of this product as unsorted municipal waste.
•Collect this product separately.
•Use collection and return systems available to you.
! WARNING ! To reduce risk of electric shock do not remove line voltage service barrier cover on frame
equipment containing an AC power supply. NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION This device is intended for environmentally controlled use only in appropriate video
terminal equipment operating environments.
CAUTION This device contains no user-serviceable components. Refer servicing to authorized
personnel.
CAUTION This device is intended for use ONLY with specified power supplies. Power connection to
unauthorized sources may cause product damage, unreliable operation, and invalidate
warranty.
CAUTION The BBG-1070-QS FPGA is designed for a normal-range operating temperature around
85° C core temperature. Operation in severe conditions exceeding this limit for
non-sustained usage are within device operating safe parameters, and can be allowed by
setting this control to Disable. However, the disable (override) setting should be avoided
under normal conditions to ensure maximum device protection.
Market Regulatory Standard or Code
United States of America FCC "Code of Federal Regulations" Title 47 Part15, Subpart B, Class A
Canada ICES-003
International CISPR 24:2010
IEC 61000-4-2:2008
IEC 61000-4-3:2006 with A1:2007 and A2:2010 IEC 61000-4-4:2004
IEC 61000-4-6:2008
IEC 61000-6-3:2006 with A1:2010
CISPR 22:2008

1BBG-1070-QS Functional Description
1-4 BBG-1070-QS PRODUCT MANUAL BBG1070QS-OM (V1.8)
BBG-1070-QS Functional Description
Figure 1-1 shows a functional block diagram of the BBG-1070-QS. The
BBG-1070-QS includes input processing functions to accommodate SDI and
CVBS analog inputs, a validity check function to provide indication of input
defects, timecode and audio data handling and routing control, multi-split
ARC/scaling functions, a timing alignment function to synchronize the inputs
to house reference, up to 5:1 Picture-in-Picture (PiP) video combining, and
burn-in attributes and control of borders, UMD display text, audio meters, and
other accessory displays. The output is available as a 3G/HD/SD-SDI output
or HDMI/DVI. The output raster format and aspect ratio is user-configurable.
BBG-1070-QS Input/Output Formats
The BBG-1070-QS provides the following inputs and outputs:
•Inputs:
•SDI/CVBS IN A thru SDI/CVBS IN E –five coaxial video inputs
(auto-detecting 3G/HD/SD-SDI or CVBS analog video)
•Outputs:
•3G/HD/SD-SDI OUT –3G/HD/SD-SDI multi-image video output
•HDMI/DVI OUT –Multi-image HDMI/DVI out with selectable audio
embedding (suitable for direct connection to monitor panels)
Video Processing Description
The BBG-1070-QS features input select and validity check functions, timing
alignment, and PiP ARC/scaling functions as described below.
Input Video Select Function
Auto-detect per PiP inputs independently set each of the device video inputs
as 3G/HD/SD-SDI or CVBS SD analog video. Either mode preserves
waveform and packet-based ancillary data for extraction and usage later in the
processing chain. A CVBS input is automatically detected by the device
input, with the CVBS ADC converter automatically engaged in these cases.
Timecode Processor
This function provides for extraction of timecode data from any of the five
per-PiP input video sources, and in turn allows timecode strings to be burned
into the respective PiP images. The function can monitor any of the device
video inputs for supported timecode formats such as HD ATC_LTC or
ATC_VITC, and ATC_VITC or VITC waveform for SD SDI or CVBS inputs.
When licensed with option +LTC, this function also can
receive and translate audio LTC timecode (from Emb Ch 1-16) for insertion
as SMPTE 12M ATC timecode formats onto the output video as described
above.

BBG1070QS-OM (V1.8) BBG-1070-QS PRODUCT MANUAL 1-5
Introduction BBG-1070-QS Functional Description
Figure 1-1 BBG-1070-QS Functional Block Diagram
SDI / CVBS IN A
Validity
Check
HTML5 Remote
Control
Ethernet 10/100
SDI
Deserialize
SDI / CVBS IN B SDI / CVBS IN C SDI / CVBS IN D
Per-Input
SDI/CVBS
Select /
5x ADC
ADC
Timecode/
ANC Data
Reader/
Proc
Per-PiP
Audio
De-Embed
AFD
Reader/
ARC
Formatting
Quint-Split
ARC
Scaler/
Formatting
Border
Insert/
Formatting
Timing
Alignment
5:1 Video
Combiner/
Formatting
Identity
Text
Burn-In/
Formatting
Ident Text
User Entry
Per-PiP ARC Scale Control
Audio
Alignment
Control
Frame Ref
Select/Failover
FRAME LOOP
Tally Graphics
Insert/Control
GPI (2 per PiP)
Ethernet
Serial
TALLY
CONTROL
Per PiP Audio
SDI/CVBS IN
SDI
CVBS
SDI / CVBS IN E
CVBS input is automatically detected by the device input, with the CVBS ADC converter automatically engaged.
SDI/CVBS AUTO-DETECT / PROCESSING
PIP 5 Cascade Mode Path
IN A
Serialize
Multi- Image HDMI OUT
Multi- Image SDI OUT (x2 DA)
HDMI
Encode/
Aud Embed
Audio Select/
Embed
Audio PPM
Meters
DashBoard
Output Preview
Generator
To Device Ethernet Port

1BBG-1070-QS Functional Description
1-6 BBG-1070-QS PRODUCT MANUAL BBG1070QS-OM (V1.8)
ARC Processor
This function provides separate ARC controls for each PiP input. The
separate controls can re-aspect SD to match the aspecting used for HD inputs,
and vice versa. Custom aspecting is also available for both HD and SD
formats.
Quint-Split ARC Scaler/Formatting Function
This function provides conversion of each PiP input to match a common
user-selected format, resulting in images that are format-matched and suitable
for combining into a single PiP image. When the PiP images are sized by this
function, the borders and other accessory attributes are now integrated into
each PiP image. In addition to full user control of PiP image H/V sizing,
accessory attributes such as border size, weight, and color can be user
configured.
Quint Timing Alignment Function
This function provides for frame alignment control of the five PiP inputs
using either the external FRAME LOOP reference signal, or a selected input
video as a frame reference. As such, BBG-1070-QS can accommodate
asynchronous program video inputs.
This function also allows frame offset delay to be added between the output
video and the frame sync reference.
Frame sync can select from external frame reference source, input video, or
free-run (internal) timing. Selectable failover allows alternate reference
selection should the initial reference source become unavailable or invalid.
5:1 Video Combiner/Formatting Function
This function combines the five video images into the user-configured
positions within the overall image. At this point, all PiP images are of the
same raster format and fully synchronous. User positioning controls provide
the H and V offsets that position the images as desired by the operator using
the GUI controls.